Information content is more important than sensory system or physical distance in guiding the long-term evolutionary relationships between signaling modalities in Sceloporus lizards

Long-term signal evolution is shaped by a variety of selective pressures including the need to convey additional information or to improve message transfer to specific receivers or through multiple environments. Here, we test the relative importance of information and sensory modality in shaping the long-term evolution of multimodal signals in Sceloporus lizards. To broadcast identity at territorial boundaries, male Sceloporus use both visual motion (headbob) and chemical signals, whereas they use color (blue belly patches) to signal aggression. Using modern phylogenetic comparative methods, we found a negative correlation between evolutionary changes in visual motion (headbobs) and chemical (femoral pore) signals, but only indirect ties between the evolution of color and motion signals (both of which are perceived visually) through viviparity, and no evidence of an evolutionary link between color and chemical signals. We also find a negative correlation between arboreality and chemical signals. Thus, information content (in this case, broadcasting individual identity versus signaling aggression) appears to play a more important role than sensory modality or physical distance in guiding long-term signal evolution. Additional insights into the underlying evolutionary processes are described, illustrating the utility of a phylogenetic approach.     

Threshold dependence of mortality effects for fine and coarse particles in Phoenix, Arizona

Daily data for fine (< 2.5 microns) and coarse (2.5-10 microns) particles are available for 1995-1997 from the U.S. Environmental Protection Agency (EPA) research monitor in Phoenix, AZ. Mortality effects on the 65 and over population were studied for both the city of Phoenix and for a region of about 50 mi around Phoenix. Coarse particles in Phoenix are believed to be natural in origin and spatially homogeneous, whereas fine particles are primarily vehicular in origin and concentrated in the city itself. For this reason, it is natural to focus on city mortality data when considering fine particles, and on region mortality data when considering coarse particles, and most of the results reported here correspond to those assignments. After allowing for seasonality and long-term trend through a nonlinear (B-spline) trend curve, and also for meteorological effects based on temperature and specific humidity, a regression of mortality was performed on PM using several different measures for PM. Based on a linear PM effect, we found a statistically significant coefficient for coarse particles, but not for fine particles, contrary to what is widely believed about the effects of coarse and fine particles. An analysis of nonlinear pollution-mortality relationships, however, suggests that the true picture is more complicated than that. For coarse particles, the evidence for any nonlinear or threshold-based effect is slight. For fine particles, we found evidence of a threshold, most likely with values in the range of 20-25 micrograms/m3. We also found some evidence of interactions of the PM effects with season and year. The main effect here is an apparent seasonal interaction in the coarse PM effect. An attempt was made to explain this in terms of seasonal variation in the chemical composition of PM, but this led to another counterintuitive result: the PM effect is highest in spring and summer, when the anthropogenic concentration of coarse PM is lowest as determined by a principal components analysis. There was no evidence of confounding between the fine and coarse PM effects. Although these results are based on one city and should be considered tentative until replicated in other studies, they suggest that the prevailing focus on fine rather than coarse particles may be an oversimplification. The study also shows that consideration of nonlinear effects can lead to real changes of interpretation and raises the possibility of seasonal effects associated with the chemical composition of PM.     

Monitoring of copper,arsenic and antimony levels in agricultural soils impacted and non-impacted by mining activities,from three regions in Chile

This paper reports a comparative study of the concentration of three important environmental elements that are often found together in mineral deposits and then associated with mining activities; copper, arsenic and antimony. These elements were determined in 26 different agricultural soils from regions I, II and V in Chile, zones where the most important and biggest copper industries of this country are located. As background levels of these elements in soils have not been well established, in this study, both, impacted and non-impacted agricultural soils from different regions were considered. The relationships between the concentrations of these elements in soils were also examined. The concentration ranges for copper, arsenic and antimony were 11-530; 2.7-202 and 0.42-11 mg kg(-1) respectively. The copper concentrations in non-polluted soils from the north and central zone of Chile were similar. However, three sites from the north region have copper concentration as higher as 100 mg kg(-1), values that exceed the critical concentration for copper in soils. The concentration of arsenic and antimony in the north soils were higher than in non-impacted ones and, in the case of arsenic, greatly exceeded the world average concentration reported for this element in soils. The highest arsenic and antimony concentrations were found in Calama and Quillagua soils, two different sites in the Loa valley. The arsenic/antimony concentration ratio was higher in Quillagua soil. The high concentrations of three elements determined in impacted soils from region V (Puchuncaví and Catemu valleys) clearly shows the impact produced in this zone by the industrial and mining activities developed in their proximities. At Puchuncaví valley a clear decrease was observed in copper, arsenic and antimony concentrations in soils on the function of the distance from the industrial complex "Las Ventanas", and all concentrations exceeded the reported critical values for this matrix. Instead at Catemu valley, only the copper concentration was higher than this value. Statistically significant correlation was found for Cu-Sb in all soils; more significant Cu-As, Cu-Sb and Sb-As correlations were evaluated for soils from Puchuncaví and Catemu valleys, corroborating that high concentrations of copper, arsenic and antimony in these soils coming from the same pollution sources, the copper industry and the thermoelectric power plant.     

Dynamics of phosphorus and phytate-utilizing bacteria during aerobic degradation of dairy cattle dung

During organic wastes degradation, P is transformed which may affect its availability. In this study, the dynamics of P and the occurrence of phytate-utilizing bacteria (PUB) were evaluated during aerobic degradation of dairy cattle dung in laboratory-scale reactors for 105 d. The results showed an increase of water-soluble inorganic P (Pi) (from 570 to 1890 mg kg(-1)) and biomass P (from 390 to 870 mg kg(-1)) during the initial 40 d. After this period, water-soluble Pi remained constant (around 1500 mg kg(-1)) and biomass P decreased (around 220 mg kg(-1)) probably due to the decrease of easily available C in dung. Under the acidic conditions in the first 20 d there was an increase in concentration of Al (25 mg kg(-1)) and Fe (27 mg kg(-1)) ions. These ions were no longer detectable in the alkaline conditions occurring after 40 d. In the same period, the Ca concentration increased (from 1170 to 2370 mg kg(-1)) and chemical speciation revealed permanent association of Ca ions with Pi. Sequential P fractionation showed a decrease of organic P in NaHCO(3), NaOH and HCl fractions and an increase of residual P (25-52% with respect to total P). Analysis by (31)P NMR also showed a decrease (from 14% to 1.6%) of phytic acid content during final experimental period (60 and 105 d). The bacteriological analysis revealed various PUB involved in degradation of the dung. Two morphotypes, genetically characterized as Enterobacter and Rahnella, which were dominant under higher content of residual P, showed strong utilization of phytate in vitro.     

Threshold Dependence of Mortality Effects for Fine and Coarse Particles in Phoenix,Arizona

ABSTRACT

Daily data for fine (<2.5 um) and coarse (2.5-10 um) particles are available for 1995-1997 from the U.S. Environmental Protection Agency (EPA) research monitor in Phoenix, AZ. Mortality effects on the 65 and over population were studied for both the city of Phoenix and for a region of about 50 mi around Phoenix. Coarse particles in Phoenix are believed to be natural in origin and spatially homogeneous, whereas fine particles are primarily vehicular in origin and concentrated in the city itself. For this reason, it is natural to focus on city mortality data when considering fine particles, and on region mortality data when considering coarse particles, and most of the results reported here correspond to those assignments.

After allowing for seasonality and long-term trend through a nonlinear (B-spline) trend curve, and also for meteorological effects based on temperature and specific humidity, a regression of mortality was performed on PM using several different measures for PM. Based on a linear PM effect, we found a statistically significant coefficient for coarse particles, but not for fine particles, contrary to what is widely believed about the effects of coarse and fine particles. An analysis of nonlinear pollution-mortality relationships, however, suggests that the true picture is more complicated than that. For coarse particles, the evidence for any nonlinear or threshold-based effect is slight. For fine particles, we found evidence of a threshold, most likely with values in the range of 20-25 ug/m³. We also found some evidence of interactions of the PM effects with season and year.

The main effect here is an apparent seasonal interaction in the coarse PM effect. An attempt was made to explain this in terms of seasonal variation in the chemical composition of PM, but this led to another counterintuitive result: the PM effect is highest in spring and summer, when the anthropogenic concentration of coarse PM is lowest as determined by a principal components analysis. There was no evidence of confounding between the fine and coarse PM effects. Although these results are based on one city and should be considered tentative until replicated in other studies, they suggest that the prevailing focus on fine rather than coarse particles may be an oversimplification. The study also shows that consideration of nonlinear effects can lead to real changes of interpretation and raises the possibility of seasonal effects associated with the chemical composition of PM.     

Multivariant statistical analysis of PCDD/FS in sewage sludges from different areas of the Valencian Community (Spain)

The levels of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) in 31 sewage sludges from different wastewater treatment plants corresponding to rural, urban and industrial areas in the Valencian Community (Spain) were analysed. Values of 5.1-346.2 ng I-TEQ kg(-1) (dry weight) were detected for sewage sludge with the highest value in one sample from an industrial area. Therefore the majority of the samples did not exceed the limit proposed (100 ng I-TEQ kg(-1)) by the [EU, 2000. Working document on sludge, 3rd draft. Brussels. Available from: http://europa.eu.int/comm/environment/waste/sludge/sludge_en.pdf] for use in agriculture. The dominant congeners for each family of compounds were 1,2,3,4,6,7,8-HpCDD and OCDD from PCDDs, and 1,2,3,4,6,7,8-HpCDF and OCDF from PCDFs. The total concentrations of PCDD/Fs were evaluated statistically through SPPS 11.0 for Windows. The principal component analysis (PCA) was used to extract two PCs as a linear combination of the original variables, one of them associated to urban+highly industrial areas and the other one to urban+low industrial areas. The linear regression method was applied and an efficient correlation was obtained between the total I-TEQ values for each sample and two of most abundant congeners (OCDF and OCDD). This expression was obtained with the results of the 31 samples analysed and a variety of data from other authors. Furthermore, several bilateral correlations between the different congeners completed the statistical analysis.     

Photocatalytic ozonation of terephthalic acid: a by-product-oriented decomposition study

Terephthalic acid (TA) is considered as a refractory model compound. For this reason, the TA degradation usually requires a prolonged reaction time to achieve mineralization. In this study, vanadium oxide (V_xO_y) supported on titanium oxide (TiO₂) served as a photocatalyst in the ozonation of the TA with light-emitting diodes (LEDs), having a bandwidth centered at 452 nm. The modified catalyst (V_xO_y/TiO₂) in combination with ozone and LEDs improved the TA degradation and its by-products. The results obtained by this system were compared with photolysis, single ozonation, catalytic ozonation, and photocatalytic ozonation of V_xO_y/TiO₂ with UV lamp. The LED-based photocatalytic ozonation showed almost the same decomposition efficiency of the TA, but it was better in comparison with the use of UV lamp. The oxalic acid accumulation, as the final product of the TA decomposition, was directly influenced by either the presence of V_xO_y or/and the LED irradiation. Several by-products formed during the TA degradation, such as muconic, fumaric, and oxalic acids, were identified. Besides, two unidentified by-products were completely removed during the observed time (60 min). It was proposed that the TA elimination in the presence of V_xO_y/TiO₂ as catalyst was carried out by the combination of different mechanisms: molecular ozone reaction, indirect mechanism conducted by ·OH, and the surface complex formation.     

Recycle of plastic residues in cellular phones through catalytic hydrocracking to liquid fuels

Plastics from cellular phones, an important contribution to electronic waste, have been studied for catalytic recycling to liquid fuels through hydrocracking. High impact polystyrene and polybutadiene, a component of high impact polystyrene and acrylonitrile–butadiene–styrene terpolymer, majority components in these residues according to literature, have been also studied in the process, using a bifunctional Pt/Hβ catalyst and under kinetic control. The results show a high yield to liquid fuels in the gasoline range with high impact polystyrene and polybutadiene, with a high content of naphthenics and isoparaffins in the catalytic process. Plastics from cellular phones, with a complex composition, require a previous removal of silicone, to prevent to formation of solids. Once silicone is removed, these residues, with a majority yield to liquids, could be treated together with other plastic wastes in catalytic hydrocracking.     

The use of volcanic soil as mineral landfill liner--III. Heavy metals retention capacity.

The volcanic soil of Southern Chile was tested for its heavy metal retention capacity. The maximum uptakes for CrO4(2-) (CrVI), Cu(2+), Zn(2+) and Pb(2+) were determined to be 2.74, 5.32, 5.86 and 7.44 mg g(-1), respectively. At a slightly alkaline pH value (7.5), it seems that a precipitation-adsorption process was responsible for the Cu(2+) and Zn(2+) uptake onto volcanic soil. All the determined values are of the same order of magnitude as natural zeolites heavy metals adsorption capacities. In addition, the heavy metals diffusion model through a 1 m volcanic soil mineral liner shows breakthrough times of 21.6, 10.2 and 8.9 years, for Pb(2+), Zn(2+) and Cu(2+), respectively, confirming the trend obtained in the adsorption isotherms. The natural volcanic soil of Southern Chile is an interesting material for possible use as landfill mineral basal sealing. It has an appropriate sealing potential (average Kf value of 5.85 x 10(-9) m s(-1)) and a heavy metals retention capacity comparable with natural zeolites. About two-thirds of the agricultural land in Chile (approximately 0.4 million km2) is derived from volcanic ash, suggesting an important soil volume for future landfill projects, that could be obtained in sufficient quantities from urban building activities.