Monitoring of emissions from selected trades and industries in Hong Kong

A survey on the concentration of organic and inorganic compounds emitted from various trades and industries in Hong Kong was performed to indicate the level of pollutants occuring in the factories, in the stacks and their dispersion into the environment. The results indicate that none of the organic or inorganic compounds present in the workplace exceed the TLV value for the factories during the visit in the two years period of study. However, the concentration of the chemistry compounds in the stack are found to be very high, with NH₃ and HCl exceeding the emission limits. As the dispersion of pollutants in a highly populated place like Hong Kong is an important concern, the effect of prominent stationary sources on the nearby population were investigated qualitatively to establish their contribution to the pollution level at the receptor site in addition to the background pollutant level. Due to the lack of input meteorological data and the highly complex topology around most sites amongst high-rise buildings in Hong Kong, it is difficult to use advanced computer model dealing with complex terrain. Instead, a simple impaction formula was tested for its applicability in Hong Kong. The results indicate an over estimation of the experimental value. Nevertheless, it could be used to provide a rough estimate of the upper limit of the pollutant concentration at given receptor sites. The feasibility of assessing the contribution or different stationary sources to the particulate collected at given receptor sites was studied and work is in progress to obtain a more comprehensive pollutant data inventory for the above assessment.     

Arsenite transporters expression in rice (Oryza sativa L.) associated with arbuscular mycorrhizal fungi (AMF) colonization under different levels of arsenite stress

As a silicon hyperaccumulator, lowland rice takes up higher levels of As than many other plants due to silicic acid and arsenite sharing the same transporters (Lsi1 and Lsi2). Glomus intraradices (AH01) was inoculated to rice under different arsenite concentrations (0, 2 and 8 μM) in order to investigate the interactions between arbuscular mycorrhizal fungus and rice on the accumulation of arsenite. The relative mRNA expressions of Lsi1 and Lsi2 resulted in a down-regulating trend in mycorrhizal plants. Under 2 μM arsenite treatments, Lsi1 and Lsi2 were significantly decreased, by 0.7-fold (P < 0.05) and 0.5-fold (P < 0.01), respectively, in mycorrhizal plants when compared with non-mycorrhizal plants. This led to the decrease of arsenite uptake per unit of root dry mass. No organic As species were detected in both roots and shoots. The As(III)/As(V) ratios indicated that mycorrhizal plants immobilized most of the arsenite proportion in the roots and prevented its translocation from the roots to the shoots.     

Where to find a mate? Resource-based sexual communication of webbing clothes moth

Mate location in moths typically entails long-range attraction of males to female-produced pheromone. Here, we show that male and female webbing clothes moths, Tineola bisselliella, seek larval habitats (dry carrion, animal lairs, etc) to encounter mates. With males seeking, and arriving at, larval habitat earlier at night than females, male-produced pheromonal and sonic signals enhance the habitat's attractiveness to females. This resource-based mating strategy of T. bisselliella differs from that known for most other moths. It may have evolved in response to larval habitats that are patchy and temporary, but that disseminate attractive semiochemicals so abundantly that T. bisselliella encounter them more readily than their own pheromones.     

Elemental composition of Jamaican foods 1: A survey of five food crop categories

The concentrations of 27 elements in Jamaican food categories consisting of fruit, legumes, leafy and root vegetables and other root crops are reported. The main analytical techniques used were neutron activation analysis and flame and graphite furnace atomic absorption spectrophotometry. The results are compared, where possible, with values from Denmark, the United Kingdom, the United States and Nigeria, and with some regulatory limits. Over 75% of the results for antimony, arsenic, barium, cerium, thorium and uranium were below the respective sample detection limits but even among these, some of the maximum values observed indicate that further examination may be useful for those foods grown in the regions of highest uptake and consumed in large amounts. The other elements reported are bromine, cadmium, calcium, caesium, cerium, chromium, copper, europium, hafnium, iron, lanthanum, lead, magnesium, manganese, phosphorus, potassium, rubidium, scandium, samarium, sodium, strontium, thorium, uranium, and zinc. Many of these elements occur at concentration levels above those reported from the other countries but it seems unlikely that most of these will contribute significantly to public health risk. However, at this stage cadmium clearly appears to be the element of greatest concern in the Jamaican food chain. The observed range of cadmium concentrations suggests that factors such as land selection, coupled perhaps where necessary, with suitably modified agricultural practices, is a feasible way to reduce the cadmium content of certain local foods.     

Significance of design and operational variables in chemical phosphorus removal

Batch and continuous experiments using model and real wastewaters were conducted to investigate the effect of metal salt (ferric and alum) addition in wastewater treatment and the corresponding phosphate removal from a design and operational perspective. Key factors expected to influence the phosphorus removal efficiency, such as pH, alkalinity, metal dose, metal type, initial and residual phosphate concentration, mixing, reaction time, age of flocs, and organic content of wastewater, were investigated. The lowest achievable concentration of orthophosphate under optimal conditions (0.01 to 0.05 mg/L) was similar for both aluminum and iron salts, with a broad optimum pH range of 5.0 to 7.0. Thus, in the typical operating range of wastewater treatment plants, pH is not a sensitive indicator of phosphorus removal efficiency. The most significant effect for engineering practice, apart from the metal dose, is that of mixing intensity and slow kinetic removal of phosphorus in contact with the chemical sludge formed. Experiments show that significant savings in chemical cost could be achieved by vigorously mixing the added chemical at the point of dosage and, if conditions allow, providing a longer contact time between the metal hydroxide flocs and the phosphate content of the wastewater. These conditions promoted the achievement of less than 0.1 mg/L residual orthophosphate content, even at lower metal-to-phosphorus molar ratios. These observations are consistent with the surface complexation model presented in a companion paper (Smith et al., 2008).     

Denitrification with carbon addition--kinetic considerations

The Blue Plains Advanced Wastewater Treatment Plant (Washington, D.C.) uses methanol as an external carbon source in a postdenitrification process, to achieve low effluent total nitrogen concentrations. This becomes more difficult in winter, at lower mixed liquor temperatures and higher flows, as a consequence of the kinetic behavior of the methanol-utilizing heterotrophs. The paper reports on an experimental batch test study conducted on Blue Plains postdenitrification sludge to investigate (1) the maximum specific growth rate of methanol-utilizing heterotrophs (Mu(METH)); (2) the temperature dependency of the growth rate; and (3) the efficacy of alternate substrates (ethanol, acetate, and sugar). A limited number of tests were conducted on sludge from two other treatment plants with methanol addition.     

Measurements of ultrafine particles and other vehicular pollutants inside a mobile exposure system on Los Angeles freeways

A mobile exposure and air pollution measurement system was developed and used for on-freeway ultrafine particle health effects studies. A nine-passenger van was modified with a high-efficiency particulate air (HEPA) filtration system that can deliver filtered or unfiltered air to an exposure chamber inside the van. State-of-the-art instruments were used to measure concentration and size distribution of fine and ultrafine particles and the concentration of carbon monoxide (CO), black carbon (BC), particle-bound polycyclic aromatic hydrocarbons (PAHs), fine particulate matter (PM2.5) mass, and oxides of nitrogen (NOx) inside the exposure chamber. This paper presents the construction and technical details of the van and air pollutant concentrations collected in 32 2-hr runs on two major Los Angeles freeways, Interstate 405 (1-405; mostly gasoline traffic) and Interstate 710 (1-710; large proportion of heavy-duty diesel traffic). More than 97% of particles were removed when the flow through the filter box was switched from bypass mode to filter mode while the vehicle was driving on both freeways. The filtration system thus provides a great particulate matter exposure contrast while keeping gas-phase pollutant concentrations the same. Under bypass mode, average total particle number concentration observed inside the exposure chamber was around 8.4 x 10(4) and 1.3 x 10(5) particles cm(-3) on the I-405 and the I-710 freeways, respectively. Bimodal size distributions were consistent and similar for both freeways with the first mode around 16-20 nm and the second mode around 50-55 nm. BC and particle-bound PAH concentrations were more than two times greater on the I-710 than on the I-405 freeway. Very weak correlations were observed between total particle number concentrations and other vehicular pollutants on the freeways.     

Associations between self-reported odour annoyance and volatile organic compounds in ‘Chemical Valley’, Sarnia, Ontario

Annoyance produced by air pollution has been suggested as a useful proxy for determining ambient air pollution exposure. However, most of the studies, to date, have focused on nitrogen dioxide and sulphur dioxide, with no work done on volatile organic compounds (VOC). This study is aimed at examining the associations between odour annoyance and VOC in ‘Chemical Valley’, Sarnia, Ontario, Canada. Annoyance scores were extracted from a community health survey (N?=?774), and exposures to VOC were estimated from respondents’ six-digit alphanumeric postal codes using land use regression models. Univariate analyses were used to explore the relationships between odour annoyance and modelled pollutants, whilst multivariate ordinal logistic regression was utilized to examine the determinants of odour annoyance. The results indicate that odour annoyance is significantly associated with modelled benzene, toluene, ethylbenzene, o-xylene and (m?+?p)?xylene (BTEX) pollutants. The findings also show that the determinants of odour annoyance in the context of VOC include gender, number of relatives in the community, perception of air pollution, community satisfaction, medical checkups, ability to cope with daily life demands and general symptoms. When compared, the analysis indicates that Sarnia residents respond to considerably lower BTEX concentrations than the allowable ‘safe’ levels in the province of Ontario. In general, the results exhibit a dose–response gradient with annoyance score increasing with rising modelled pollutant concentrations. The observed relationships suggest that odour annoyance might be a function of true exposure and may serve as a proxy for air quality and ambient air pollution monitoring. However, questionnaire-based odour annoyance scores need to be longitudinally validated across different geographical scales and pollutants if they are to be adopted at the national level.     

Monitoring of Benzene in Ambient Air with Organic Vapor Badges

The original Texas Intersection Model (TEXIN) for air quality near street intersections has been widely adopted across the nation. At the request of transportation agencies from several states, the TEXIN model was revised to improve its performance and flexibility. The new capabilities include T-intersections, one-way streets, four-way stops, inspection/maintenance capabilities, anti-tampering programs and a short-cut emissions algorithm. TEXIN2 uses the CMA procedures for estimating traffic flow parameters, MOBILE3 to determine free flowing traffic cruise emissions, and CALINE3 to model the pollutant distribution downwind of an intersection. The new model, TEXIN2, offers the user more accurate simulations with enhanced versatility while still requiring a minimal amount of input data.