Molten carbonate fuel cells fed with biogas: Combating H2S

The use of biomass and waste to produce alternative fuels, due to environmental and energy security reasons, is a high-quality solution especially when integrated with high efficiency fuel cell applications. In this article we look into the coupling of an anaerobic digestion process of organic residues to electrochemical conversion to electricity and heat through a molten carbonate fuel cell (MCFC). In particular the pathway of the exceedingly harmful compound hydrogen sulphide (H₂S) in these phases is analysed. Hydrogen sulphide production in the biogas is strongly interrelated with methane and/or hydrogen yield, as well as with operating conditions like temperature and pH. When present in the produced biogas, this compound has multiple negative effects on the performance and durability of an MCFC. Therefore, there are important issues of integration to be solved.Three general approaches to solve the sulphur problem in the MCFC are possible. The first is to prevent the formation of hydrogen sulphide at the source: favouring conditions that inhibit its production during fermentation. Secondly, to identify the sulphur tolerance levels of the fuel cell components currently in use and develop sulphur-tolerant components that show long-term electrochemical performance and corrosion stability. The third approach is to remove the generated sulphur species to very low levels before the gas enters the fuel cell.     

Modeling a spatially restricted distribution in the Neotropics: How the size of calibration area affects the performance of five presence-only methods

We here examine species distribution models for a Neotropical anuran restricted to ombrophilous areas in the Brazilian Atlantic Forest hotspot. We extend the known occurrence for the treefrog Hypsiboas bischoffi (Anura: Hylidae) through GPS field surveys and use five modeling methods (BIOCLIM, DOMAIN, OM-GARP, SVM, and MAXENT) and selected bioclimatic and topographic variables to model the species distribution. Models were first trained using two calibration areas: the Brazilian Atlantic Forest (BAF) and the whole of South America (SA). All modeling methods showed good levels of predictive power and accuracy with mean AUC ranging from 0.77 (BIOCLIM/BAF) to 0.99 (MAXENT/SA). MAXENT and SVM were the most accurate presence-only methods among those tested here. All but the SVM models calibrated with SA predicted larger distribution areas when compared to models calibrated in BAF. OM-GARP dramatically overpredicted the species distribution for the model calibrated in SA, with a predicted area around 10⁶ km² larger than predicted by other SDMs. With increased calibration area (and environmental space), OM-GARP predictions followed changes in the environmental space associated with the increased calibration area, while MAXENT models were more consistent across calibration areas. MAXENT was the only method that retrieved consistent predictions across calibration areas, while allowing for some overprediction, a result that may be relevant for modeling the distribution of other spatially restricted organisms.     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

活性碳纤维吸附废气中的丙烯酸和甲苯

采用动态吸附法探讨了在活性碳纤维对模拟废气中丙烯酸和甲苯的吸附过程中,各因素对活性碳纤维穿透吸附量和饱和吸附量的影响。实验结果表明,在模拟废气中丙烯酸质量分数为0.2%、双柱塞泵流量为6.1mL/h、载气流量为1.60L/min的条件下,穿透时间为10min,活性碳纤维的穿透吸附量为227.5mg/g,饱和吸附时间为40min,活性碳纤维的饱和吸附量为460.0m g/g。     

Bio-drying and size sorting of municipal solid waste with high water content for improving energy recovery

Bio-drying can enhance the sortability and heating value of municipal solid waste (MSW), consequently improving energy recovery. Bio-drying followed by size sorting was adopted for MSW with high water content to improve its combustibility and reduce potential environmental pollution during the follow-up incineration. The effects of bio-drying and waste particle size on heating values, acid gas and heavy metal emission potential were investigated. The results show that, the water content of MSW decreased from 73.0% to 48.3% after bio-drying, whereas its lower heating value (LHV) increased by 157%. The heavy metal concentrations increased by around 60% due to the loss of dry materials mainly resulting from biodegradation of food residues. The bio-dried waste fractions with particle size higher than 45 mm were mainly composed of plastics and papers, and were preferable for the production of refuse derived fuel (RDF) in view of higher LHV as well as lower heavy metal concentration and emission. However, due to the higher chlorine content and HCl emission potential, attention should be paid to acid gas and dioxin pollution control. Although LHVs of the waste fractions with size <45 mm increased by around 2× after bio-drying, they were still below the quality standards for RDF and much higher heavy metal pollution potential was observed. Different incineration strategies could be adopted for different particle size fractions of MSW, regarding to their combustibility and pollution property.     

Sulfur Dioxide and Material Damage

Whereas most estimates of material damage are based on industrial surveys, the estimates produced in this study were derived from material damage experiments and ambient air quality data. Air quality data on SO₂ were obtained from 200 or more monitoring sites primarily located in heavily populated or polluted areas. Material threshold damage function data were then compared with SO₂ levels, and an estimate of losses, as reflected in increased maintenance and replacement costs, was determined. Estimates of the total stock of various materials in use were derived from census and industry data and allocated geographically according to population. A substantial decrease in the ambient SO₂ levels, particularly in larger urban areas, has occurred during the past five years. From 1968 to 1972, the estimated amount of material damage from SO₂ in the U. S. decreased from $900 million/yr to less than $100 million. During this period, the estimated percentage of man made materials exposed to SO₂ levels exceeding the proposed secondary annual average standard (60 μg/m³) and primary annual average standard (80 μg/m³) in the U. S. fell respectively, from 20% to less than 5% and from more than 10% to less than 1%. Most of the present loss is attributed to corrosion damage of metallic surfaces that are normally exposed to the ambient environment.     

石油降解菌的分离鉴定及4株芽胞杆菌种间效应

通过富集培养和分离纯化的方法,从天津大港油田石油污染土壤和渤海海上钻井平台洗油污水中分离出6株石油降解细菌,生理生化试验及16S r DNA序列分析鉴定表明,它们分别属于Bacillus芽胞杆菌属(S1、S2、S3、S4)、Pseudomonas假单胞菌属(W1)和Ochrobactrum苍白杆菌属(W2),其中,S3具有最高的烷烃(41.3%)和芳烃(30.9%)降解率,从石油污染场地中筛选出的内源微生物对本油田石油的降解效果优于外源物种.对4株芽胞杆菌属菌株构建微生物组进行石油降解实验,结果表明,由S1和S4构成的微生物组F3具有最高的烷烃(50.5%)和芳烃(54.0%)降解率,比单菌降解率分别提高了69.9%和156.1%,同时比最优降解单菌S3的降解率分别高出22.1%和74.6%,而由S2和S3构成的微生物组F4对烷烃和芳烃的降解率最低,分别为18.5%和18.9%,比单菌降解率降低了55.3%和39.0%,实验表明同菌属微生物种间对石油的降解同时存在协同促进和拮抗抑制作用,芽胞杆菌属内亲缘性近的菌株之间对石油降解主要表现为促进作用.     

Climate change,risk perception,and protection motivation among high-altitude residents of the Mt. Everest region in Nepal

Mountain ecosystems are considered vulnerable to early impacts of climate change. Whether and how local residents of these areas perceive these changes, however, remain under-studied questions. By conducting a household survey in the Khumbu region of Nepal, this study assessed local residents’ experience-based perception of changes in climate trends and patterns, perceived risk, and attitudes towards climate issues. Multivariate cluster analysis based on residents’ climate change beliefs revealed three segments: “Cautious,” “Disengaged,” and “Alarmed.” A comparison of these segments along key psychosocial constructs of Protection Motivation Theory (PMT) revealed significant inter-segment differences in residents’ perception of severity, vulnerability, response efficacy, self-efficacy, and response cost associated with engaging in mitigating behavior. Results shed light on how residents of high elevation areas that are considered to be exposed to early impacts of climate change perceive the risk and intend to respond. These findings could also assist stakeholders working in other similar mountain ecosystems in understanding vulnerability and in working towards climate readiness.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01369-x) contains supplementary material, which is available to authorized users.