Managing employee perceptions of the psychological contract over time: the role of employer social accounts and contract fulfillment

This study proposed and tested relationships pertaining to employee perceptions of psychological contract type over time. Using a longitudinal design, we examined the mediated role that adequacy of social accounts and psychological contract fulfillment play in determining the development of contract perceptions. More specifically, our model posits that perceptions of contract type will influence employee perceptions of the adequacy of social accounts that are offered by the organization and its agents to explain job‐related decisions. These initial perceptions of social accounts at Time 1 were expected to impact perceptions of psychological contract fulfillment at Time 2 (6 months later) and psychological contract fulfillment was proposed to be positively associated with perceptions of a relational psychological contract. Results support the mediating roles of social accounts and psychological contract fulfillment in determining perceptions of contract type over time. Practical implications of these findings and directions for future research are discussed. Copyright © 2006 John Wiley & Sons, Ltd.     

Free phosphine from the anaerobic biosphere

The possible liberation of highly toxic and mutagenic phosphine from putrefying media raises the question of its significance as a problem of hygiene. Free phosphine was established by gas chromatography as a universal trace component in gas emitted from the anaerobic biosphere. Sources of phosphine include landfills, compost processing, sewage sludge, animal slurry and river sediments. We detected maximum concentrations in the order of 20 ppb(v/v).     

A New Method for the Rapid Determination of Volatile Organic Compound Breakthrough Times for a Sorbent at Concentrations Relevant to Indoor Air Quality

Abstract

The use of sorbents has been proposed to remove volatile organic compounds (VOCs) present in ambient air at concentrations in the parts-per-billion (ppb) range, which is typical of indoor air quality applications. Sorbent materials, such as granular activated carbon and molecular sieves, are used to remove VOCs from gas streams in industrial applications, where VOC concentrations are typically in the parts-per-million range. A method for evaluating the VOC removal performance of sorbent materials using toluene concentrations in the ppb range is described. Breakthrough times for toluene at concentrations from 2 to 7500 ppb are presented for a hydrophobic molecular sieve at 25% relative humidity. By increasing the ratio of challenge gas flow rate to the mass of the sorbent bed and decreasing both the mass of sorbent in the bed and the sorbent particle size, this method reduces the required experimental times by a factor of up to several hundred compared with the proposed American Society of Heating, Refrigerating, and Air-Conditioning Engineers method, ASHRAE 145P, making sorbent performance evaluation for ppb-range VOC removal more convenient. The method can be applied to screen sorbent materials for application in the removal of VOCs from indoor air.     

New Fabrics and their Potential Application

Considering fabric filtration, particularly the fabrics and their ability to handle submicron particulate and fumes, it is noted that the value of new developments are measured in terms of both improved operational and economic efficiency. The types of available fibers dictate fabric production characteristics as well as the limits of application for the manufactured fabric.     

On-road and laboratory investigation of low-level PM emissions of a modern diesel particulate filter equipped diesel passenger car

Modern diesel particulate filter (DPF) systems are very effective in reducing particle emissions from diesel vehicles. In this work low-level particulate matter (PM) emissions from a DPF equipped EURO-4 diesel vehicle were studied in the emission test laboratory as well as during real-world chasing on a high-speed test track. Size and time resolved data obtained from an engine exhaust particle sizer (EEPS) and a condensation particle counter (CPC) are presented for both loaded and unloaded DPF condition. The corresponding time and size resolved emission factors were calculated for acceleration, deceleration, steady state driving and during DPF regeneration, and are compared with each other. In addition, the DPF efficiency of the tested vehicle was evaluated during the New European Driving Cycle (NEDC) by real time pre-/post-DPF measurements and was found to be 99.5% with respect to PM number concentration and 99.3% for PM mass, respectively. PM concentrations, which were measured at a distance of about 10 m behind the test car, ranged from 1 to 1.5 times background level when the vehicle was driven on the test track under normal acceleration conditions or at constant speeds below 100 kmh^?1. Only during higher speeds and full load accelerations concentrations above 3 times background level could be observed. The corresponding tests in the emission laboratory confirmed these results. During DPF regeneration the total PM number emission of nucleation mode particles was 3–4 orders of magnitude higher compared to those emitted at the same speed without regeneration, while the level of the accumulation mode particles remained about the same. The majority of the particles emitted during DPF regeneration was found to be volatile, and is suggested to originate from accumulated sulfur compounds.     

Fly ash of mineral coal as ceramic tiles raw material

The aim of this work was to evaluate the use of mineral coal fly ash as a raw material in the production of ceramic tiles. The samples of fly ash came from Capivari de Baixo, a city situated in the Brazilian Federal State of Santa Catarina. The fly ash and the raw materials were characterized regarding their physical chemical properties, and, based on these results; batches containing fly ash and typical raw materials for ceramic tiles were prepared. The fly ash content in the batches varied between 20 and 80 wt%. Specimens were molded using a uniaxial hydraulic press and were fired. All batches containing ash up to 60 wt% present adequate properties to be classified as several kinds of products in the ISO 13006 standard () regarding its different absorption groups (pressed). The results obtained indicate that fly ash, when mixed with traditional raw materials, has the necessary requirements to be used as a raw material for production of ceramic tiles.     

Recycling of iron foundry sand and glass waste as raw material for production of whiteware.

The purpose of this study was to evaluate the production feasibility of triaxial whiteware using sand from cast iron moulds as a raw material instead of silica, and recycled glass in place of feldspar. Formulations were prepared using sand, glass waste, and white-firing clay such that only 50% of the composition was virgin material (clay). The ceramic bodies were formed by pressing and fired at different temperatures (between 1100 and 1300 degrees C). Specimens were characterized in terms of green density prior to firing; and their flexural strength, linear shrinkage, and water absorption were measured after firing. The microstructure was determined by scanning electron microscopy. Possible environmental impacts of this recycling process were also evaluated, through solubility and leaching tests, according to Brazilian standards. Gaseous emissions during the firing process were also analysed. The results showed that it is possible to produce triaxial ceramics by using such alternative raw materials.     

Toxic oxide deposits from the combustion of landfill gas and biogas

Oxide deposits found in combustion systems of landfill gas fired power stations contain relatively high concentrations of elements which form volatile species such as P, As, Sb and Sn. These deposits should be handled with care because of their potential toxicity. By contrast, deposits in biogas system engines were found to contain much lower levels of such elements. The enrichment of these elements can be attributed to a hypothetical multistage process. The elements form volatile species in the landfill body. They are selectively transported as part of the landfill gas into the gas-burning devices. Inside the burners, they are immobilized as nonvolatile oxides.