Semiconductor-assisted photodegradation of lignin, dye, and kraft effluent by Ag-doped ZnO

This work reports a preliminary study of semiconductor-assisted photochemical degradation of lignin, Remazol Brilliant Blue R and Kraft E1 paper effluent by using ZnO and Ag-doped ZnO photocatalysts. The doped semiconductor was prepared in the reaction media by photoreduction of silver nitrate. With the use of 100 mg of ZnO and 15 mg of Ag-ZnO, almost total decolorization of the dye and lignin samples in reaction times lower than 60 min were observed. Extending the photochemical reaction up to 120 min, the total organic carbon content (TOC) was reduced in 90%. For the paper effluent, a fast decolorization was obtained for relatively short reaction times. However, de TOC reduction was negligible (near of 10%) up to high reaction times (300 min). By using the Ag-ZnO photocatalyst, the toxicity of lignin and Kraft E1 effluent toward E. Coli was completely removed. For the dye, the formation of transient toxic species was observed.     

Modelling soot and SOF emissions from a diesel engine

Modelling of soot and SOF emissions from a typical European turbocharged diesel engine has been made. The model consists of a detailed kinetic mechanism with 472 reactions (120 chemical species) and data from the thermodynamic diagnostic procedure of the combustion process of the engine. The forward kinetic constants were obtained from literature and the background constants from a self-developed non-linear fitting routine based on the Marquardt algorithm. The dilution and mixing processes inside the engine are represented by a simple Wiebe function. The system of ordinary differential equations is solved with the Rosenbrock method for rigid systems and using the interpolating Lagrange polynomials to calculate the heat capacity of each species at the corresponding temperature. The kinetic model has been implemented in Digital Visual Fortran 6.0. The model has been executed for five different fuels and three mixtures of biodiesel and reference diesel operating under three diverse conditions from the European transient urban/extraurban Certification Cycle and the results of soot and SOF predicted are compared with experimental data.     

Geochemical behavior of heavy metals in a Zn–Pb–Cu mining area in the State of Mexico (central Mexico)

The geochemical behavior of zinc, lead and copper from sulfidic tailings in a mine site with potential to generate acidic drainage (pyrite (55%) and sphalerite (2%)) is reported in this paper. The mining area is divided in two zones, considering the topographic location of sampling points with respect to the tailings pile: (a) outer zone, out of the probable influence of acid mine drainage (AMD) pollution, and (b) inner zone, probably influenced by AMD pollution. Maximum total ions concentrations (mg/L) measured in superficial waters found were, in the outer zone: As (0.2), Cd (0.9), Fe (19), Mn (39), Pb (5.02), SO4(2-) (4650), Zn (107.67), and in the inner zone are As (0.1), Cd (0.2), Fe (88), Mn (13), Pb (6), SO4(2-) (4,880), Zn (46). The presence of these ions that exceeding the permissible maximum limits for human consume, could be associated to tailings mineralogy and acid leachates generated in tailings pile.     

Photocatalytic degradation of cellulose bleaching effluent by supported TiO2 and ZnO

A cellulose bleaching effluent (E1) was degraded in batch conditions by photocatalysis using TiO2 and ZnO supported on glass Raschig rings. The effluent was completely decolourised and the total phenol content was reduced by 85% after 120 min treatment with both catalysts. Partial mineralization of the organic matter was confirmed by total organic carbon (TOC) reduction, approximately 50%. The residual organic matter shows a low acute toxicity as compared to the initial values and AOX values are strongly reduced after the photocatalytic oxidation. Molecular mass distribution showed that high molecular mass compounds were almost completely degraded.     

Fresnel lens to concentrate solar energy for the photocatalytic decoloration and mineralization of orange II in aqueous solution

The decoloration and mineralization of the azo dye orange II under conditions of artificial ultraviolet light and solar energy concentrated by a Fresnel lens in the presence of hydrogen peroxide and TiO(2)-P25 was studied. A comparative study to demonstrate the viability of this solar installation was done to establish if the concentration reached in the focus of the Fresnel lens was enough to improve the photocatalytic degradation reaction. The degradation efficiency was higher when the photolysis was carried out under concentrated solar energy irradiation as compared to UV light source in the presence of an electron acceptor such us H(2)O(2) and the catalyst TiO(2). The effect of hydrogen peroxide, pH and catalyst concentration was also determined. The increase of H(2)O(2) concentration until a critical value (14.7 mM) increased both the solar and artificial UV oxidation reaction rate by generating hydroxyl radicals and inhibiting the (e(-)/h(+)) pair recombination, but the excess of hydrogen peroxide decreases the oxidation rate acting as a radical or hole scavenger and reacting with TiO(2) to form peroxo-compounds, contributing to the inhibition of the reaction. The use of the response surface methodology allowed to fit the optimal values of the parameters pH and catalyst concentration leading to the total solar degradation of orange II. The optimal pH range was 4.5-5.5 close to the zero point charge of TiO(2) depending on surface charge of catalyst and dye ionization state. Dosage of catalyst higher than 1.1 gl(-1) decreases the degradation efficiency due to a decrease of light penetration.     

Soil-erosion and runoff prevention by plant covers in a mountainous area (se spain): Implications for sustainable agriculture

In the Mediterranean region the intensities and amounts of soil loss and runoff on sloping land are governed by rainfall pattern and vegetation cover. Over a two-year period (1998–1999), six wild species of aromatic and mellipherous plants (Thymus serpylloides subsp. Gadorensis, Thymus baeticus Boiss, Salvia lavandulifolia Vahl., Santolina rosmarinifolia L., Lavandula stoechas L. and Genista umbellata Poiret) were selected for erosion plots to determine their effectiveness in reducing water erosion on hillslopes of the Sierra Nevada Mountain (SE Spain). The erosion plots (including a bare-soil plot as control), located at 1,345 m in altitude, were 2 m² (2 m × 1 m) in area and had 13% incline. The lowest runoff and soil erosion rates, ranging from 9 to 26 mm yr⁻¹ and from 0.01 to 0.31 Mg ha⁻¹ yr⁻¹, respectively, over the entire study period, were measured under the Thymus serpylloides. Lavandula stoechas L. registered the highest rates among the plant covers tested, runoff ranging from 77 to 127 mm yr⁻¹ and erosion from 1.67 to 3.50 Mg ha⁻¹ yr⁻¹. In the bare-soil plot, runoff ranged from 154 to 210 mm yr⁻¹ and erosion from 4.45 to 7.82 Mg ha⁻¹ yr⁻¹. According to the results, the lowest-growing plant covers (Thymus serpylloides and Salvia lavandulifolia Vahl.) discouraged the soil erosion and runoff more effectively than did the taller and open medium-sized shrubs (Santolina rosmarinifolia L., Genista umbellata Poiret, Thymus baeticus Boiss and Lavandula stoechas L.). Monitoring allowed more direct linkage to be made between plant covers and the prevention of erosion, with implications for sustainable mountain agriculture and environmental protection.     

Trends in exhaust emissions from in-use Mexico City vehicles, 2000–2006. A remote sensing study

A remote sensing study was conducted in year 2006 in four locations of the Metropolitan Area of Mexico City (MAMC). Two of the sites were the same studied back by us in year 2000 and by others in year 1994. A database was compiled containing 11,289 valid measurements for the carbon monoxide (CO), total hydrocarbons (THC), and nitric oxide (NO) exhaust vehicles emissions. Valid measurements were binned for each pollutant by the vehicle specific power (between −5 and 20 kW tonne⁻¹) for the 2000 and 2006 databases. The mean average CO, THC, and NO emissions for year 2006 were determined to be 1.10 ± 0.18 vol.%, 299 ± 88.4 ppm, and 610 ± 115.0 ppm, respectively. Matching the vehicle driving patterns of the fleet measured in year 2000 with the emissions factors obtained in this work, allows estimating the trends in the exhaust emissions of vehicles in the MAMC. The adjusted results of the remote sensing study performed in year 2006 shows that the fleet has decrease 22% in CO and 17% in NO emissions, with small change in total hydrocarbons emissions. The improvements could be related with the introduction in year 2001 of vehicles that met tighter emissions standards, particularly for nitrogen oxides.     

Comparative toxicity of effluents processed by different treatments in V79 fibroblasts and the algae Selenastrum capricornutum

The efficacy of ozonation and of photocatalysis processing in the treatment of pulp mill ECF (elementary chlorine free) bleaching and textile effluents was evaluated by determining total organic carbon reduction (TOC) and the toxicity. The chronic toxicity of the effluents was evaluated by the ability to inhibit the growth of algae Selenastrum capricornutum. Cultured hamster V79 fibroblasts were used to assess the cytotoxicity of effluents submitted to different detoxification processes. Two endpoints were measured in V79 cells: 3-(4,5-dimethylthiazole-2-yl)-2,5-biphenyl tetrazolium bromide (MTT) reduction and neutral red uptake (NRU). Both treatment processes were able to reduce the TOC, although ozonization was less effective for pulp mill ECF bleaching. The pulp mill ECF bleaching and textile effluents reduced the growth of S. capricornutum by 39% and 27%, respectively. However, at the highest concentration tested, the textile effluents treated by photochemical process for 60 min showed increased cytotoxicity in V79 cells compared to the untreated effluent when assessed by the NRU and MTT reduction assays (increases of 30% and 40%, respectively). Pulp mill ECF bleaching effluent treated by ozonization had a similar cytotoxicity to that of untreated effluent in the NRU assay. In contrast, the MTT reduction assay indicated that effluents treated with ozone were around 20% more cytotoxic than untreated effluents. These results show that cultured fibroblasts may be useful for studying cellular responses to pollutants and may be included in tests to monitor the efficiency of effluent detoxification processes.     

Biogeochemical characterization of surface waters in the Aljustrel mining area (South Portugal)

Aljustrel mining area (South Portugal) is a part of the Iberian Pyrite Belt and encloses six sulfide mineral masses. This mine is classified of high environmental risk due to the large tailings’ volume and acid mine drainage (AMD)-affected waters generated by sulfides’ oxidation. The use of biological indicators (e.g., diatoms) revealed to be an important tool to address the degree of AMD contamination in waters. Multivariate analysis has been used as a relevant approach for the characterization of AMD processes. Cluster analysis was used to integrate the significant amount and diversity of variables (physicochemical and biological), discriminating the different types of waters, characterized by the high complexity occurring in this region. The distinction of two main marked phenomena was achieved: (1) the circumneutral-Na-Cl water type (sites DA, PF, BX, BF, RO, CB), expressing the geological contributions of the Cenozoic sediments of Sado river basin, with high diatom diversity (predominating brackish diatoms as Entomoneis alata); and (2) the acid–metal-sulfated water type (sites BM, JU, RJ, AA, MR, BE, PC, AF), reflecting both the AMD contamination and the dissolution of minerals (e.g., silicates) from the hosting rocks, potentiated by the extremely low pH. This last group of sites showed lower diatom diversity but with typical diatoms from acid- and metal-contaminated waters (e.g., Pinnularia aljustrelica). In addition to these two water types, this hierarchical classification method also allowed to distinguish individual cases in subclusters, for example, treated dams (DC, DD), with alkaline substances (lime/limestone), that changed the physicochemical dynamics of the contaminated waters.