Comparative study on performances of a heat-pipe PV/T system and a heat-pipe solar water heating system

The heat-pipe solar water heating (HP-SWH) system and the heat-pipe photovoltaic/thermal (HP-PV/T) system are two practical solar systems, both of which use heat pipes to transfer heat. By selecting appropriate working fluid of the heat-pipes, these systems can be used in the cold region without being frozen. However, performances of these two solar systems are different because the HP-PV/T system can simultaneously provide electricity and heat, whereas the HP-SWH system provides heat only. In order to understand these two systems, this work presents a mathematical model for each system to study their one-day and annual performances. One-day simulation results showed that the HP-SWH system obtained more thermal energy and total energy than the HP-PV/T system while the HP-PV/T system achieved higher exergy efficiency than the HP-SWH system. Annual simulation results indicated that the HP-SWH system can heat the water to the available temperature (45°C) solely by solar energy for more than 121 days per year in typical climate regions of China, Hong Kong, Lhasa, and Beijing, while the HP-PV/T system can only work for not more than 102 days. The HP-PV/T system, however, can provide an additional electricity output of 73.019 kWh/m², 129.472 kWh/m², and 90.309 kWh/m² per unit collector area in the three regions, respectively.     

Estimating ‘rhizosphere priming effect’: Comparison of the indirect <Emphasis Type="Italic">y</Emphasis>-intercept regression approach and direct bare plot Approach

Determined the contribution of root derived CO₂ efflux to total CO₂ efflux (including root and non-root derived CO₂ efflux) is import to grope the mechanism of CO₂ efflux, however, becaused of ‘rhizoshere priming effect’ (RPE), it is difficult to achieve in practice. In this study, we attempted to estimate the RPE via comparing basal soil respiration (R_b) achieved by two different methods namely, y-intercept regression and direct bare plot approach in an arid cotton field, central Asia. On the basis of the y-intercept of linear regressions between below-ground respiration (BGR) and root biomass, R_b was indirectly calculated. Comparing with the first approach, the second approach involved direct measurements of soil respiration from bare plots. R_b estimated by y-intercept method contained the component of RPE whereas direct bare plot did not. We found that RPE showed a phenological trend with highest value in flowering stage at 0.145 g CO₂ m^–2 h^–1 and lowest at budding stage (0.007 g CO₂ m^–2 s^–1), even after the data had been corrected for the influence of soil temperature. We concluded that RPE needed to be considered when R_b was estimated by y-intercept approach.     

The key elements analysis of Guangdong & Shenzhen ETS & tips for China national ETS construction

The only joint effort area of provincial and municipal governments resides in Guangdong Province and Shenzhen City in China’s carbon emission trading system (ETS) pilots, which characterize the national carbon ETS plots. The present study on the operating experience from this area has important reference value for the national carbon ETS. Analysis and comparison of the key elements show many differences in coverage, total allowance, allowance allocation, and MRV mechanism between Guangdong and Shenzhen carbon ETS. The present study provides the following explanation: (1) the design characteristics of carbon ETS (e.g. coverage, total quotas, the allocation, and MRV mechanism) depend on the local geographical conditions and policy goals. The differences of economic structure in Guangdong Province and Shenzhen City result in different coverage, which then result in differences in other management elements. (2) The operating state of the carbon market is affected by overall design of carbon ETS: in the case of tighter total allowance, lower proportion of China Certified Emission Reductions, and harsher punishment, the carbon market is relatively active, which intends to produce carbon financial market. Based on deep analysis of operation characteristics of carbon ETS in Guangdong and Shenzhen, the present study suggests that (1) the allowance should be allocated freely at the beginning stage and then gradually transited to the voluntary paid auction; (2) the allowances assigned to companies shall be linked up with their energy-saving objectives; (3) the output fluctuations and economic influence on the allowance allocation should be properly handled to maintain the fairness and consistence of allowance allocation standards; (4) stable public expectation is one of the key elements to maintain the regular operation of carbon ETS; (5) constrained carbon emission behavior outside ETS can contribute to social justice; and (6) the improvement of professional skills of relevant personnel in the enterprise and independent third party can enhance carbon emissions data reliability.     

长江中游城市群经济与生态成本空间演化模式分析

综合运用变异系数、泰尔指数及ESDA-GIS多种方法,在充分考虑传统经济影响因子的基础上,尝试引入经济发展生态成本指标,分析长江中游城市群经济综合发展水平与生态成本的空间匹配及演化模式。研究表明:经济综合发展水平高低聚集特征明显,空间极化现象是导致区域经济发展不平衡的主要原因;生态成本空间集聚现象以高高集聚和低低集聚为主,且呈现出高高集聚减少、低低集聚增多的现象,生态成本消耗有所改善;2001~2012年长江中游城市群市域经济综合发展水平与生态成本表现出越来越显著的差异化空间格局,呈现出由低经济综合发展水平-低生态成本过渡到高经济综合发展水平-高生态成本,进而发展到高经济综合发展水平-低生态成本的空间匹配模式的阶段性特征;高经济综合发展水平-高生态成本的经济发展模式仍在大部分城市中存在,经济与生态空间协调发展的潜力仍然很大。     

烟草烟雾对室内空气颗粒物浓度的影响

采用电称冲击低压系统(ELPI)将无烟室和吸烟室内的空气颗粒物(0.03～10.00 μm)分成12级,对其粒子数和质量浓度进行测定.结果表明,吸烟室PM0.03～10.00的日平均粒子数和质量浓度分别是无烟室的1.50、1.13倍.烟草烟雾对室内颗粒物粒子数的影响集中在0.03～1.00 μm粒径段;对室内颗粒物质量浓度的影响表现为双模态结构,峰值分别在0.20～0.70、5.00～8.20 μm粒径段.烟草烟雾颗粒物的粒子数和质量浓度随烟雾消散时间的增加而减少,粒径越小,减小的越明显;烟草烟雾颗粒物在室内消散缓慢,会在长时间内造成影响,应引起足够关注.     

温度对17α-乙炔雌二醇在SBR工艺中去除效果的影响

17a-乙炔雌二醇(EE2)属于人工合成雌激素,是活性较强的环境内分泌干扰物之一.在污水处理厂中,EE2主要是通过活性污泥的生物降解作用得以去除.影响活性污泥对EE2生物降解的因素很多,温度是影响因素之一.分别采用一级缺氧/好氧(A/O)模式和三级缺氧/好氧(A/O/A/O/A/O)模式运行的SBR工艺.考察了温度对EE2去除的影响.试验发现,随着温度的升高,EE2在水相和泥相中的去除率明显增加,其中在30℃时EE2去除率达到最大,2种运行模式下水相中EE2去除率均达到了96%以上;泥相是EE2生物降解的主要场所;EE2生物降解主要发生在好氧阶段,缺氧阶段EE2生物降解效果不明显.     

双水相气浮浮选光度法处理环境水样中痕量土霉素残留物

建立了一种新型分离方法--双水相气浮浮选光度法,使其处理环境水样中痕量土霉紊(OTC)残留物,研究了其工作原理,并用高效液相色谱法对该方法的可靠性进行了验证.利用自制的双水相气浮浮选装置,选择四氢呋喃作亲水有机溶剂、质量分数为10%的NaCl溶液作分相剂,NaOH溶液调节pH,将Cu2+与OTC形成的疏水配合物浮选至有机相,实现OTC与水样分离.浮选完毕后,经紫外-可见分光光度法分析,线性回归方程为A=1.532×105c+0.1230(其中:A为有机相的吸光度;c为水样的OTC摩尔浓度,mol/L),相关系数为0.9998,该方法的线性范围为4.8×10-7～7.3×10-5 mol/L,OTC加标回收率为99.5%～100.1%.     

粗石英砂层厚度及倾角对核废物处置库顶盖毛细屏障效应的影响

毛细屏障作为核废物处置库顶盖的工程屏障之一,已经在国内外得到了广泛应用.采用箱体实验方法,研究了非饱和稳定流条件下粗石英砂层厚度和倾角对毛细屏障效应的影响.结果表明,随着粗石英砂层厚度的增大,水分的相对绕流量增大,毛细屏障效应增强;随着粗石英砂层倾角的增大,其表面积水减少,水的横向流动能力增强,毛细屏障效应增强.     

污染物负荷对曝气生物滤池处理效果的影响研究

考察了进水有机负荷和氨氮负荷对曝气生物滤池出水水质的影响.结果表明,系统COD、氨氮和TN的去除率随进水有机负荷的增加而下降,在氨氮为28.3～33.6 mg/L、TN为39.0～45.8 mg/L条件下,有机负荷小于3.53 kg/(ms3·d)时,出水COD、氨氮和TN分别小于50、5、15 mg/L,去除率分别在85%、85%和65%以上;氨氮和TN的去除率随氨氮负荷的增加而下降,在COD为287.6～313.4 mg/L、氨氮负荷小于0.56 kg/(m3·d)时,出水氨氮小于8 mg/L,去除率在85%以上,出水TN小于15mg/L,去除率在65%以上.