Influence of calcium chloride on the thermal behavior of heavy and alkali metals in sewage sludge incineration

In order to separate and reuse heavy and alkali metals from flue gas during sewage sludge incineration, experiments were carried out in a pilot incinerator. The experimental results show that most of the heavy and alkali metals form condensed phase at temperature above 600 degrees C. With the addition of 5% calcium chloride into sewage sludge, the gas/solid transformation temperature of part of the metals (As, Cu, Mg and Na) is evidently decreased due to the formation of chloride, while calcium chloride seems to have no significant influence on Zn and P. Moreover, the mass fractions of some heavy and alkali metals in the collected fly ash are relatively high. For example, the mass fractions for Pb and Cu in the fly ash collected by the filter are 1.19% and 19.7%, respectively, which are well above those in lead and copper ores. In the case of adding 5% calcium chloride, the heavy and alkali metals can be divided into three groups based on their conversion temperature: Group A that includes Na, Zn, K, Mg and P, which are converted into condensed phase above 600 degrees C; Group B that includes Pb and Cu which solidify when the temperature is above 400 degrees C; and Group C that includes As, whose condensation temperature is as low as 300 degrees C.     

Modification of ferrite–manganese oxide sorbent by doping with cerium oxide

Fe–Mn oxide and Ce-doped Fe–Mn oxide sorbents were studied on the structural and desulfurization behavior in COS removal from syngas. The effects of cerium oxide on the Fe–Mn oxides have been investigated by XRD, BET, TPR, XPS and TEM methods. Analysis data show that the Ce-doped sorbent has larger specific surface area and better particles’ dispersion compared with non-modified Fe–Mn sorbent. The addition of Ce improves the reduction performance of Fe–Mn species. The desulfurization experiments show that the desulfurization activity of sorbent can be increased because of the promotion of the structural and redox properties by ceria doped. The Ce-doped sorbent can reduce COS from 15,000 ppmv to less than 0.1 ppmv at 325 °C and a space velocity of 1000 h⁻¹.     

树脂吸附-Fenton试剂氧化法处理水杨醛生产废水

采用树脂吸附-Fenton试剂氧化法处理水杨醛生产废水。XF-01树脂和XF-02树脂静态吸附水杨醛生产废水时,COD去除率均在85％以上,挥发酚去除率均高于90％。XF-02树脂对水杨醛生产废水的处理效果更佳。动态吸附随废水流量增大,吸附出水的COD和挥发酚质量浓度均增加。适宜的废水流量为15BV,树脂的最佳脱附温度为80℃。在连续4批的吸附-脱附实验中,吸附出水的平均COD约为1200mg／L,平均挥发酚质量浓度小于10mg／L。在Fenton试剂氧化中,铁屑和铁粉的催化效果差别很小,都好于FeSO4·7H2O。以铁屑为催化剂、H2O2溶液加入量为1％时,氧化出水的COD小于150mg／L,挥发酚质量浓度小于0．5mg／L。     

用次磷酸钠废渣制备饲料级磷酸三钙

采用高温煅烧工艺,以工业生产次磷酸钠的废渣为原料,制备饲料级磷酸三钙,并对最佳工艺条件进行探讨。最佳工艺条件：煅烧温度600℃、煅烧时间20min。制得的饲料级磷酸三钙中磷的质量分数为16％～18％,符合Q／YHY01—2003《饲料级磷酸三钙》产品质量企业标准。     

灭多威农药废水处理技术

采用酸化、氧化、铁炭微电解、兼氧-好氧生化技术处理灭多威农药生产废水（简称废水）。实验结果表明：废水经酸化处理后可回收H2S和CH3SH,经氧化处理后可去除废水的恶臭气味,经铁炭微电解处理后COD总去除率平均为90．7％,废水可生化性指标BOD5／COD从0升至0．30以上;预处理后的废水再经过兼氧＋好氧生化处理,COD达到GB8978-1996（污水综合排放标准》中的一级标准100mg/L以下。     

聚四氟乙烯高压密封罐消解样品测定五氧化二钒

利用聚四氟乙烯高压密封罐消解矿石样品测定五氧化二钒,具有操作手续相对简便、轻松、快捷等优点,与传统的硫酸－磷酸混合酸消解或采用碱熔融前处理法比较,相对误差小于１．６％,样品的添加标准回收率为９２．９％～１０３．５％。     

应用D412螯合树脂治理含镍电镀废水的研究

本文研究了Ｄ４１２螯合树脂对Ｎｉ（Ⅱ）离子静态和动态的吸收性能,并且研究了使用Ｄ４１２树脂除去和回收电镀废水中镍的最佳条件。     

有机膨润土对苯胺的吸附性能及应用研究

以溴化十六烷基三甲铵为改性剂制备有机膨润土,利用正交实验研究了有机膨润土吸附垃圾渗滤液中极性有机污染物苯胺的性能、条件及改性条件对吸附效果的影响。结果表明,有机改性膨润土对苯胺有很好的吸附效果,实验条件下对苯胺的去除率可达90％以上,绘制了有机膨润土吸附苯胺的吸附等温线,通过与吸附苯酚效果的比较,总结了有机膨润土吸附极性有机污染物的一般规律。