新型悬浮填料澄清池中填料对澄清作用的影响初探

为考察可取代传统二沉池的新型悬浮填料澄清池技术的原理及关键参数,小试试验研究了填料对新型悬浮填料澄清池固液分离过程中附着污泥形成及其絮凝性能的影响,并对填料在澄清中的作用机理进行了探讨。结果表明,当泥水界面上升至填料区后,可以形成较悬浮污泥更加致密稳定的附着污泥区,并形成孔道流,强化了对混合液中污泥颗粒的絮凝效果;填料区可以捕捉去除从悬浮污泥区中“逃逸”的微小污泥絮体,并降低出水浊度,有效地保证了出水水质的稳定性。填料的存在发挥了强大的整流作用,降低了雷诺数Re,提高了弗汝德数Fr,从而改善了污泥絮凝的水力条件,提高了澄清能力。     

伞罩型湿式脱硫除尘塔入口结构优化模拟

利用商用CFD软件Fluent,采用k-ε湍流模型和SIMPLE算法,对新型伞罩型湿式脱硫除尘塔内的三维两相流场进行数值模拟,发现了塔内烟气入口处流场所存在的不均匀性。为将其流场调节均匀从而提高脱硫除尘效率,在数值模拟的基础上提出在入口处加装直导流板、阶梯导流板和弯曲导流板,并分析塔内y=0截面速度的分布,以及z＝0.21 m截面上的颗粒浓度、速度和压力等参数的分布。结果表明：通过加装阶梯导流板和弯曲导流板均可以将流场调节均匀,达到较理想状态,从而实现高效净化气体的目的。模拟结果对设备的优化设计和实际运行有一定的指导作用。     

利用烧结脱硫灰制备胶凝材料的研究

研究了烧结烟气半干法脱硫灰复掺矿渣、钢渣,辅之外加剂,制备胶凝材料的可行性。结果表明,采用改性脱硫灰（GXTLH）、钢渣、矿渣及水泥熟料再混磨制备的复合胶凝材料,具有良好的安定性等水化性能和力学性能;当GXTLH 掺入量为20%、CFII 1.5%、减水剂0.5%及水泥熟料23%时,矿渣掺量在12%～44%、钢渣掺量11%～44%之间制备的胶凝材料初凝时间、终凝时间、力学性能满足GB13592-92《钢渣矿渣水泥标准》;矿渣与钢渣比、水泥熟料及外加剂等掺量一定,GXTLH掺量超过30%时,GXTLH胶凝材料的抗压抗折强度均有所下降。     

大学生就业难的原因分析及指导对策

本文对大学生就业存在的自身问题、高校办学专业设置和培养模式问题、用人单位的误区问题以及现今的社会问题等进行了理性分析,并提出了加强对大学生的就业指导,引导大学生树立科学理性的就业观,广泛疏通就业途径和集聚多方力量鼓励大学生自主创业的对策。     

干法腈纶生产废水脱氨氮研究

采用本实验室富集驯化的高效硝化细菌对生化处理后的干法腈纶生产废水进行了脱NH3-N研究,在连续运行装置中考察了DO和MLSS的变化特征,并研究了废水NH3-N负荷和COD负荷对脱NH3-N效果的影响.实验结果表明:该菌能适应干法腈纶生产废水中的难生物降解物质并有效去除废水中的NH3-N,启动期DO呈现"高-低-高"的变化,运行期污泥增长速率呈现"S"型变化;进水NH3-N负荷达到0.405 kg/(m3·d)时仍能维持出水P(NH3-N)在5 mg/L以下,进水COD负荷由0.126 kg/(m3·d)提高到0.975 kg/(m3·d)的过程中,NH3-N去除率始终高于96%.     

Modification of Fe–Mn mixed oxide COS removal sorbent by rare-earth oxides addition

In order to develop highly active sorbent for COS removal, Fe–Mn mixed oxides doped with CeO₂, La₂O₃ or Sm₂O₃ were studied. The effects of these promoters on the structural properties of Fe–Mn oxides were investigated by XRD, BET, TPR and TEM techniques. XRD results revealed that the degree of crystallinity of Fe–Mn oxide phase decreased due to the addition of rare-earth oxides. Doping with CeO₂, La₂O₃ or Sm₂O₃ led to an increase in BET surface area of the sample. TPR studies showed that the reactivity of the reduction of doped samples increased in the temperature range of 300–450 °C. In addition, the desulfurization test was performed at 325 °C with a gas hourly space velocity of 1000 h⁻¹. It was found that the addition of 3% La₂O₃ greatly improved the absorption sulfur capacity of the sorbent, while the sorbent doped 3% CeO₂ achieved a sufficiently high purifying degree before breakthrough.     

Seasonal variations in microcystin concentrations in Lake Taihu, China

An enzyme-limited immunosorbent assay (ELISA) was used to monitor spatial and temporal variation of microcystins (MCs) in Lake Taihu. MC concentrations were higher in summer and autumn than in other seasons. Maximal MC concentration was 15.6 mug L(-1). Compared to central Lake Taihu and Wuli Bay, Meiliang Bay had higher MC concentrations due to high biomass of Microcystis.     

Spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) in sediments of the Nansi Lake, China

Polycyclic aromatic hydrocarbons (PAHs) were measured in surface sediments and dated core sediments from the Nansi Lake of China to investigate the spatial and temporal distribution characteristics. The concentrations of 16 kinds priority PAH compounds were determined by GC-MS method. And ²¹⁰Pb isotope dating method was used to determine the chronological age of the sediment as well as the deposition rate. The results indicated that the total PAHs concentration ranges in surface and core sediment samples were 160 ~32,600 and 137 ~ 693 ng/g (dry wt.), respectively. The sediment rate and the average mass sedimentation were calculated to be 0.330 cm·year^???1 and 0.237 g·cm^???2·yr^???1 and the sediment time of the collected core sample ranged from 1899 to 2000. The peak of PAH concentrations came at recent years. The source analysis showed PAHs mainly came from the contamination of low temperature pyrogenic processes, such as coal combustion. The PAHs concentrations were lower than ERL and LEL values for most collected samples. However, in several surface sediment samples especially in estuary sites, the PAHs concentrations were not only higher than ERL and LEL values, but also higher than ERM values.     

Estimation of the temporal and spatial distribution of dust concentration over China by combining PM10 and conventional meteorological observations

In this paper, we will present a simple algorithm to estimate the temporal and spatial distribution of dust mass concentration by combining PM10 and conventional meteorological observations. The efficiency of the algorithm has been demonstrated by applying it to analyze the dust source, transport, and dissipation of the dust storm which occurred in the west region of Pa-tan-chi-lin Desert at 0200 BST 27 March, 2004.