应用鱼类生物完整性指数评价荔浦河河流健康

生物完整性指数是河流生态系统健康评价主要方法之一。为评价荔浦河河流健康状况,选择鱼类作为指示生物,构建了基于鱼类生物完整性指标体系。2017年1月、4月、7月和10月对荔浦河4次采样共采集到鱼类21 192尾,经鉴定共计94种,隶属于6目17科62属。以S1(修仁镇)、S10(马岭镇)、S11(双江镇)作为参考点,经过分布范围分析、箱体图判别能力分析及相关性分析等指标筛选过程从25个候选指标筛选出5个指标,即鱼类总物种数、Shannon-Wiener多样性指数、肉食性鱼类数量百分比、敏感性鱼类数量百分比、产漂浮型卵鱼类数量百分比。将荔浦河河流健康等级分为"健康"、"一般"、"较差"、"极差"和"无鱼"5个等级。结果表明,荔浦河青山镇、荔浦县及蒲芦乡河段健康状态为"一般"水平,东昌镇、龙怀乡、杜莫镇及新坪镇河段健康状态为"较差"水平,茶城乡河段健康状态为"极差"水平。筑坝工程、架桥工程和修路工程等人类活动导致荔浦河支流上的健康状况比干流更差。上述研究结果可为荔浦河的河流管理和保护提供理论依据和技术支持。     

燃煤型砷中毒的最低有效累积暴露剂量初探

以陕南燃煤型砷中毒病区的5个自然村为调查采样点,通过现场流行病学调查和环境样品的分析测定,分析砷暴露人群的砷暴露途径,估算各暴露途径(呼吸、饮水和食物)的暴露剂量及对总暴露的贡献率,探讨引发燃煤型地方性砷中毒发病的最低有效暴露剂量。研究结果表明,除对照村外,采暖季各村的烤火间和卧室空气砷含量均有不同程度的超标,水和粮食未受燃煤砷污染。在采暖季,高砷煤燃烧污染的空气是人群砷暴露的主要来源;在非采暖季消化道砷暴露是各村的主要摄砷途径;表明消化道暴露对累积砷暴露的贡献不容忽视。结合问卷调查和流行病学调查结果,估算陕南病区引发燃煤型砷中毒的最低累积暴露剂量在1 712 mg左右。     

TMA改性粘土矿物对模拟地下水中苯系物的吸附

用短链季铵盐阳离子表面活性剂四甲基铵离子（ＴＭＡ）改性膨润土和凹凸棒土,研究它们对模拟地下水中苯系物的吸附作用。二种ＴＭＡ改性粘土矿物均可以有效地吸附模拟地下水中的苯系物,吸附机理较复杂,主要以表面吸附为主。     

同步辐射X射线荧光和吸收谱技术在环境汞污染研究中的应用进展

汞作为一种重要的全球性重金属污染物,被许多国际组织列为优先控制污染物。常规的汞分析手段,例如电感耦合等离子体质谱(ICP-MS)、原子荧光光谱(AFS)等,对汞的分析精度较高,方法比较成熟,但对样品前处理要求也较高。同步辐射技术由于其高、精、准的优势,且对样品前处理要求比较简单、可实现原位无损分析,因此被广泛应用于环境样品的分析中。随着研究的发展,同步辐射X射线荧光光谱(SRXRF)和同步辐射X射线吸收光谱(SRXAS)技术在环境汞污染分析领域得到了越来越多的应用。主要介绍了我国环境汞污染现状及污染特征,同步辐射技术对于汞分布蓄积、含量和化学形态分析方面的独特优势,重点回顾了本项目组和其他一些研究组近几年关于SRXRF和SRXAS技术在环境介质如土壤、植物体内汞的分布蓄积、相对含量和化学形态转化研究领域的应用进展,对进一步发展并提高同步辐射技术在环境及生物体汞污染水平、毒性机理和生态毒理评价方面的应用进行了展望。     

Analyzing and quantitatively evaluating the organic matter source at different ecologic zones of tidal salt marsh, North Jiangsu Province, China

In order to explore the effect of different ecological zones and their above plants in the organic matter cycling of the whole tidal salt marsh, indicators such as total organic carbon (TOC), total nitrogen (TN), C/N ratio, δ¹³C and δ¹⁵N of surface, core sediments, and plants of tidal salt marshes in North Jiangsu Province are analyzed. Subsequently, distribution regularities of these measurement indicators are discussed, and the biogeochemistry processes between sediments and plants are also analyzed. Lastly, the organic matter sources of different ecologic zones in tidal salt marsh are evaluated, and the organic matter accumulations in different ecologic zones induced by their plants are also compared. These results indicate that TOC, TN, C/N ratio and δ¹³C showed obvious zonal distribution. The organic matter sources are dominated by marine input in the silt flat, artemisia schrenkiana flat, and the transition zone between silt and spartina alterniflora flat, and are controlled by terrigenous input in spartina alterniflora flat. Spartina alterniflora plays an important role in the accumulation of organic matter in the whole tidal salt marshes ecosystem. In the study area, the annually increased TOC, organic matter and TN in the spartina alterniflora, artemisia schrenkiana and reed flats reach 6,451, 12,043 and 536 t, respectively. The amount of TOC, organic matter and TN accumulated in the spartina alterniflora flat is more than that in other ecological zones, which shows that the spartina alterniflora flat exert a non-replaceable effect on the material cycle and exchange in the whole tidal salt marshes ecosystem.     

Coupling a land use model and an ecosystem model for a crop-pasture zone

This paper describes the development of a land use model coupling ecosystem processes. For a given land use pattern in a region, a built-in regional ecosystem model (TESim) simulates leaf physiology of plants, carbon and nitrogen dynamics, and hydrological processes including runoff generation and run-on re-absorption, as well as runoff-induced soil erosion and carbon and nitrogen loss from ecosystems. The simulation results for a certain period from 1976 to 1999 were then used to support land use decisions and to assess the impacts of land use changes on environment. In the coupling model, the land use type for a land unit was determined by optimization of a weighted suitability derived from expert knowledge about the ecosystem state and site conditions. The model was applied to the temperate crop-pasture band in northern China (CCPB) to analyze the interactions between land use and major ecosystem processes and functions and to indicate the added value of the feedbacks by comparing simulations with and without the coupling and feedbacks between land use module and ecosystem processes. The results indicated that the current land use in CCPB is neither economical nor ecologically judicious. The scenario with feedbacks increased NPP by 46.78 g C m⁻² a⁻¹, or 32.23% of the scenario without feedbacks, also decreased soil erosion by 0.65 kg m⁻² a⁻¹, or 23.13%. Without altering the regional land use structure (proportions of each land use type). The system developed in this study potentially benefits both land managers and researchers.     

Occurrence and migration of microplastics and plasticizers in different wastewater and sludge treatment units in municipal wastewater treatment plant

● Reduce the quantifying MPs time by using Nile red staining. ● The removal rate of MPs and PAEs in wastewater and sludge were investigated. ● MPs and PAEs were firstly analyzed during thermal hydrolysis treatment. ● The removal of PAEs from wastewater and sludge was mainly biodegradation. Microplastics (MPs) and plasticizers, such as phthalate esters (PAEs), were frequently detected in municipal wastewater treatment plants (MWTP). Previous research mainly studied the removal of MPs and PAEs in wastewater. However, the occurrence of MPs and PAEs in the sludge was generally ignored. To comprehensively investigate the occurrence and the migration behaviors of MPs and PAEs in MWTP, a series of representative parameters including the number, size, color, shape of MPs, and the concentrations of PAEs in wastewater and sludge were systematically investigated. In this study, the concentrations of MPs in the influent and effluent were 15.46±0.37 and 0.30±0.14 particles/L. The MP removal efficiency of 98.1% was achieved and about 73.8% of MPs were accumulated in the sludge in the MWTP. The numbers of MPs in the sludge before and after digestion were 4.40±0.14 and 0.31±0.01 particles/g (dry sludge), respectively. Fourier Transform Infrared Spectroscopy (ATR FT-IR) analysis showed that the main types of MPs were polyethylene terephthalate (PET), polypropylene (PP), polyethylene (PE), and polystyrene (PS). Six PAEs, including phthalate (DMP), diethyl phthalate (DEP), diisobutyl phthalate (DIBP), ortho dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), and bis(2-ethyl) hexyl phthalate (DEHP), were detected in the MWTP. The concentrations of total PAEs (ΣPAEs) in the influent and effluent were 76.66 and 6.28 µg/L, respectively. The concentrations of ΣPAEs in the sludge before and after digestion were 152.64 and 31.70 µg/g, respectively. In the process of thermal hydrolysis, the number and size of MPs decreased accompanied by the increase of the plasticizer concentration.     

专家系统在废水生物处理操作和控制中的应用

本文介绍了国外近二十年来专家系统在废水生物处理工艺控制领域的应用及开发的典型系统,分析了废水生物处理工艺难于控制的原因、各类系统的结构和特点及目前废水处理专家系统的不足,探讨了废水生物处理专家系统今后应深入研究的问题及方向     

天津市纪庄子污水处理厂恶臭气体排放研究

2011年,在天津市纪庄子污水处理厂内采集空气样品,并对其中恶臭气体的浓度、扩散模式、影响范围及污水厂内各主要构筑物间相关系数进行了分析研究。结果表明,污水处理厂格栅处恶臭气体浓度最高,为4.31 ng/mL,其中95.61%为H2S气体,其他构筑物恶臭气体浓度范围为0.09～0.32 ng/mL,恶臭气体浓度较前处理工艺相比有大幅度减少;各主要构筑物排放的恶臭气体符合高斯气体扩散模式,恶臭影响范围为厂界外100 m以内;格栅处恶臭气体的排放对于厂界处恶臭气体浓度的贡献度最大,为42.68%;格栅、初沉池、脱水机房、二沉池之间的相关度在90%以上。     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.