A critical comparison of the cost-effectiveness of domestic radon remediation programmes in three counties of England

Radon remediation programmes in domestic dwellings were carried out in five areas, from three counties of England, and the total costs obtained. A single company, which abided by the Code of Practice of the Radon Council of Great Britain, carried out the remediation. The dose savings from the programmes were calculated and used to estimate the number of lung cancers averted. The data obtained allowed the cost-effectiveness of the remediation programmes in each area to be calculated. The remediation programmes in three areas (Northants 2, 3 and North Oxfordshire) were cost-effective whereas those in two areas (Northants 1 and North Somerset) were not. To be cost-effective, the Northants I and North Somerset areas would need to increase the number of householders that carried out remediation, if they were over the UK Action Level. Health policy makers should concentrate their resources on communities in areas where there is a significant proportion of dwellings above the UK Action Level and where the number of properties being remediated is low.     

A Systematic Review of Public Attitudes,Perceptions and Behaviours Towards Production Diseases Associated with Farm Animal Welfare

Increased productivity may have negative impacts on farm animal welfare (FAW) in modern animal production systems. Efficiency gains in production are primarily thought to be due to the intensification of production, and this has been associated with an increased incidence of production diseases, which can negatively impact upon FAW. While there is a considerable body of research into consumer attitudes towards FAW, the extent to which this relates specifically to a reduction in production diseases in intensive systems, and whether the increased incidence of diseases represents a barrier to consumer acceptance of their increased use, requires further investigation. Therefore a systematic review of public attitudes towards FAW was conducted, with a specific focus on production diseases in intensive systems. Four databases were searched to identify relevant studies. A screening process, using a set of pre-determined inclusion criteria, identified 80 studies, with the strength of evidence and uncertainty assessed for each. A thematic analysis led to the identification of 6 overarching themes constructed from 15 subthemes. The results demonstrate that the public are concerned about FAW in modern production systems. Concern varied in relation to age, gender, education and familiarity with farming. Naturalness and humane treatment were central to what was considered good welfare. An evidence gap was highlighted in relation to attitudes towards specific production diseases, with no studies specifically addressing this. However, the prophylactic use of antibiotics was identified as a concern. A number of dissonance strategies were adopted by consumers to enable guilt free meat consumption.     

Networks,Agency and (De)stabilization: The Issue of Navigation on the River Wye,UK

This paper assesses the way in which an actor network presiding over the management of the River Wye has stabilized through accepting a particular view on the issue of navigation. The paper provides an account of how the network was challenged by a dissonant actor who, through reviving an old company, developed a counter network. It is argued that network stabilization is a form of consensus-building and it is contended that the way in which an issue is defined is crucial in terms of the successful enrolment of actors. The paper illustrates some of the conflicts and complexities encountered in resource planning, suggesting that research of this nature should trace actors back through time as well as through space if dynamics between actors involved in rural planning and management are to be effectively understood.     

Sustainable development in the mining industry: clarifying the corporate perspective

This paper examines sustainable development in the corporate mining context, and provides some guidelines for mining companies seeking to operate more sustainably. There is now a burgeoning literature that examines sustainable development in the context of minerals and mining, most of which is concerned with sustainability at global and national scales. What is often challenging to ascertain, however, from these numerous perspectives on sustainable mineral extraction, minerals and metals recycling, environmental management, and social performance, is how sustainable development applies to mining companies themselves, and what steps a mine must take in order to improve the sustainability of operations. Since mining processes have the potential to impact a diverse group of environmental entities, and are of interest to a wide range of stakeholder groups, there is ample opportunity for the industry to operate more sustainably. Specifically, with improved planning, implementation of sound environmental management tools and cleaner technologies, extended social responsibility to stakeholder groups, the formation of sustainability partnerships, and improved training, a mine can improve performance in both the environmental and socioeconomic arenas, and thus contribute enormously to sustainable development at the mine level.     

Radon releases from Australian uranium mining and milling projects: assessing the UNSCEAR approach

The release of radon gas and progeny from the mining and milling of uranium-bearing ores has long been recognised as a potential radiological health hazard. The standards for exposure to radon and progeny have decreased over time as the understanding of their health risk has improved. In recent years there has been debate on the long-term releases (10,000 years) of radon from uranium mining and milling sites, focusing on abandoned, operational and rehabilitated sites. The primary purpose has been estimates of the radiation exposure of both local and global populations. Although there has been an increasing number of radon release studies over recent years in the USA, Australia, Canada and elsewhere, a systematic evaluation of this work has yet to be published in the international literature. This paper presents a detailed compilation and analysis of Australian studies. In order to quantify radon sources, a review of data on uranium mining and milling wastes in Australia, as they influence radon releases, is presented. An extensive compilation of the available radon release data is then assembled for the various projects, including a comparison to predictions of radon behaviour where available. An analysis of cumulative radon releases is then developed and compared to the UNSCEAR approach. The implications for the various assessments of long-term releases of radon are discussed, including aspects such as the need for ongoing monitoring of rehabilitation at uranium mining and milling sites and life-cycle accounting.     

Predictive abilities of numerical sediment quality guidelines in Sydney Harbour, Australia, and vicinity

Matching chemical and toxicological data of surficial sediments from Sydney Harbour, Australia, and vicinity, were collected to evaluate predictive abilities of Effects Range-Low (ERL), Effects Range-Median (ERM) and other sediment quality guidelines (SQGs). Samples (n=103) containing a wide range of chemicals and concentrations were subjected to a battery of 4-6 toxicity tests. ERLs and functionally equivalent low-range SQGs were highly predictive of non-toxicity when not exceeded, as incidences of toxicity were 0-8%. ERMs and other mid-range SQGs were predictive of toxicity in combined test data with > or = 80% of toxic samples with one or more SQG exceeded. Predictive abilities of mid-range SQGs were low for amphipod survival tests (generally < 20% toxic samples), but the incidence of toxicity increased with increasing numbers of SQGs exceeded and increasing mean SQG quotients. Predictive abilities of SQGs generally matched their narrative intent when outcomes of multiple toxicity tests were considered, and were consistent with North American data. Functionally equivalent SQGs gave comparable results (except where developed for single chemical classes), indicating that predictive abilities were primarily influenced by sensitivities of test species and/or the bioavailability of contaminants.     

Technology,managerial, and policy initiatives for improving environmental performance in small-scale gold mining industry

This paper reviews a series of strategies for improving environmental performance in the small-scale gold mining industry. Although conditions vary regionally, few regulations and policies exist specifically for small-scale gold mining activity. Furthermore, because environmental awareness is low in most developing countries, sites typically feature rudimentary technologies and poor management practices. A combination of policy-, managerial- and technology-related initiatives is needed to facilitate environmental improvement in the industry. Following a broad overview of these initiatives, a recommended strategy is put forth for governments keen on improving the environmental conditions of resident small-scale gold mines.     

Mercury: An agent of poverty in Ghana's small-scale gold-mining sector?

There is consensus worldwide that the artisanal and small-scale mining (ASM) sector is comprised of individuals who are trapped in a vicious cycle of poverty, lacking the necessary financial and technological means to improve their standards of living. Minimal work, however, has been undertaken to identify the very factors behind miners’ plight, which inevitably vary from country to country. This paper uses a case study of Ghana to argue that an increased dependence upon mercury for amalgamation in artisanal gold-mining communities is one such—albeit overlooked—“agent of poverty”. There is mounting empirical evidence which suggests that dealings with the monoponistic middlemen who supply mercury, purchases of costly medicines to remedy ailments caused by mercury poisoning, and a lack of appropriate safeguards and alternatives to amalgamation, are preventing gold miners from improving their practices and livelihoods. The solution to the problem lies in breaking this cycle of dependency, which can be achieved by providing miners with robust support services, mercury-free technologies and education.     

Formation of dioxins during exposure of pesticide formulations to sunlight

Chlorinated pesticides can contain impurities of dibenzo-p-dioxins and dibenzofurans (PCDD/Fs), and their precursors, as a result of various manufacturing processes and conditions. As precursor formation of PCDD/Fs can also be mediated by ultraviolet light (UV), this study investigated whether PCDD/Fs are formed when currently used pesticides are exposed to natural sunlight. Formulations containing pentachloronitrobenzene (PCNB; n = 2) and 2,4-dichlorophenoxyacetic acid (2,4-D; n = 1) were exposed to sunlight in quartz tubes, and the concentration of 93 PCDD/F congeners were monitored over time. Considerable formation of PCDD/Fs was observed in both PCNB formulations (by up to 5600%, to a maximum concentration of 57 000 μg ∑PCDD/F kg⁻¹) as well as the 2,4-D formulation (by 3000%, to 140 μg ∑PCDD/F kg⁻¹). TEQ also increased by up to 980%, to a maximum concentration of 28 μg kg⁻¹ in PCNB, but did not change in the 2,4-D formulation. Assuming similar yields as observed in the present study as a worst case scenario the use of PCNB in Australia may result in the formation of 155 g TEQ annum⁻¹, contributed primarily by OCDD formation. This warrants detailed evaluations on the contemporary release of PCDD/Fs to the environment after the use of pesticides. Changes in congener profiles (including the ratio of PCDDs to PCDFs (DF ratio)) suggest that pesticide sources of PCDD/Fs after sunlight exposure may not be recognized based on matching source fingerprints established from manufacturing impurities. These changes also provide preliminary insights into the possible formation routes and types of precursors involved.     

Possible biological significance of contaminated sediments in Port Jackson,Sydney, Australia

Comprehensive investigations of estuaries incentral New South Wales has identified Port Jackson as themost contaminated waterway on the eastern seaboard ofAustralia. Extensive areas of the estuary are mantled insediment containing high concentrations of a large range ofmetallic and organic contaminants. Although extensive, thisdatabase does not provide an effective basis for determiningthe potential adverse effects of chemicals on livingresources. In the absence of any ecotoxicologicalinformation, the recently published (1999) draft Australianand New Zealand Environmental and Conservation Council(ANZECC) sediment quality guidelines have been used toassess possible adverse biological effects of thesetoxicants. The ANZECC guidelines use the lower effects range of thewidely used U. S. National Oceanic and AtmosphericAdministration (NOAA) scheme to identify potentiallycontaminated sediment and as a threshold to trigger foradditional investigative work. This guideline level has beenused in the current study to assess possible toxicity ofcontaminated sediments in Port Jackson. It is estimated thatsediments in approximately 26% of the estuary, mainly theupper parts of the harbour and much of the central harbour,have a 67% probability of being toxic. Sediments in thecentral harbour and a major tributary, the Middle Harbour,comprising about 40% of the estuary, have a 13 to 25%probability of toxicity. All sediments in the harbour,except at the mouth of the estuary, would require additionalenvironmental assessment based on the proposed draft ANZECCsediment quality guidelines.