Estimating the benefits of recreation under conditions of congestion congestion

In a recent issue of J. Environ. Econ. Manag. Wetzel showed that the standard travel cost technique will understate recreation benefits under congested conditions because changes in entry fee lead to lowered congestion levels. This comment indicates that benefit projections derived from the travel cost procedure may theoretically overstate the true value of recreation if rising income levels shift the demand curve upwards but fail to account for the contrary effect of increased congestion. The magnitude and direction of the bias that results from omission of a congestion variable is, however, indeterminate when standard econometric techniques are used to develop benefit projections.     

Evaluation of a Slag and Portland Cement Mix to Simulate Treatment of Acidic Waste via Solidification/Stabilization in a Deep Soil Mix Application

Site investigations at an oil and gas facility identified a highly acidic waste referred to as residual acid tar that resulted in the transport of dissolved nickel toward the point of compliance at concentrations that exceeded site environmental screening levels. Solidification/stabilization (S/S) via deep soil mixing was selected as the remedial approach and a mixture of ground granulated blast furnace slag cement and Portland cement was subjected to treatability testing to evaluate the reagent mix's ability to achieve treatment objectives. Results from the treatability test showed a cement mix dose of 21 percent was sufficient to raise the pH above the target of 6.0 and reduce dissolved nickel concentrations to below site screening levels in leachate from treated samples of residual acid tar and material impacted by residual acid tar. Cement mix doses of 21 percent or greater were sufficient to achieve target strengths in the unimpacted shallow overburden. However, none of the doses tested were able to achieve target strengths in the residual acid tar or peaty material impacted by the residual acid tar. Results showed soil strengths increased significantly when the pH in leachate from the treated samples approached 12, suggesting the presence of organic acids related to the peaty soils may interfere with the cement set. Recommendations from the study include additional treatability testing to evaluate pre‐treatment with hydrated lime to satisfy acid neutralization requirements prior to dosing with the cement mix. ©2016 Wiley Periodicals, Inc.     

Assessment of the Extreme Rainfall Event at Nashville,TN and the Surrounding Region on May 1–3, 2010

This paper analyzes the May 1–3, 2010 rainfall event that affected the south‐central United States, including parts of Mississippi, Tennessee, and Kentucky. The storm is evaluated in terms of its synoptic setting, along with the temporal distributions, and spatial patterns of the rainfall. In addition, the recurrence interval of the storm is assessed and the implications for hydrologic structure designs are discussed. The event was associated with an upper‐level trough and stationary frontal boundary to the west of the rainfall region, which remained quasi‐stationary for a period of 48 h. Heavy rainfall was produced by two slow‐moving mesoscale convective complexes, combined with abundant atmospheric moisture. Storm totals exceeding 330 mm occurred within a large elongated area extending from Memphis to Nashville. Isolated rainfall totals over 480 mm were reported in some areas, with NEXRAD weather radar rainfall estimates up to 501 mm. An extreme value analysis was performed for one‐ and two‐day rainfall totals at Nashville and Brownsville, Tennessee, as well as for gridded rainfall estimates for the entire region using the Storm Precipitation Analysis System. Results suggest maximum rainfall totals for some durations during the May 1–3, 2010 event exceeded the 1,000‐year rainfall values from National Oceanic and Atmospheric Administration Atlas 14 for a large portion of the region and reached up to 80% of the probable maximum precipitation values for some area sizes and durations.     

Cost‐effective conservation of an endangered frog under uncertainty

How should managers choose among conservation options when resources are scarce and there is uncertainty regarding the effectiveness of actions? Well‐developed tools exist for prioritizing areas for one‐time and binary actions (e.g., protect vs. not protect), but methods for prioritizing incremental or ongoing actions (such as habitat creation and maintenance) remain uncommon. We devised an approach that combines metapopulation viability and cost‐effectiveness analyses to select among alternative conservation actions while accounting for uncertainty. In our study, cost‐effectiveness is the ratio between the benefit of an action and its economic cost, where benefit is the change in metapopulation viability. We applied the approach to the case of the endangered growling grass frog (Litoria raniformis), which is threatened by urban development. We extended a Bayesian model to predict metapopulation viability under 9 urbanization and management scenarios and incorporated the full probability distribution of possible outcomes for each scenario into the cost‐effectiveness analysis. This allowed us to discern between cost‐effective alternatives that were robust to uncertainty and those with a relatively high risk of failure. We found a relatively high risk of extinction following urbanization if the only action was reservation of core habitat; habitat creation actions performed better than enhancement actions; and cost‐effectiveness ranking changed depending on the consideration of uncertainty. Our results suggest that creation and maintenance of wetlands dedicated to L. raniformis is the only cost‐effective action likely to result in a sufficiently low risk of extinction. To our knowledge we are the first study to use Bayesian metapopulation viability analysis to explicitly incorporate parametric and demographic uncertainty into a cost‐effective evaluation of conservation actions. The approach offers guidance to decision makers aiming to achieve cost‐effective conservation under uncertainty.     

An experimental evaluation of transgenerational isotope labelling in a coral reef grouper

Transgenerational isotope labelling (TRAIL) using enriched stable isotopes provides a novel means of mass-marking marine fish larvae and estimating larval dispersal. The technique, therefore, provides a new way of addressing questions about demographic population connectivity and larval export from no-take marine protected areas. However, successful field applications must be preceded by larval rearing studies that validate the geochemical marking technique, determine appropriate concentrations and demonstrate that larvae are not adversely affected. Here, we test whether injection of enriched stable barium isotopes (¹³⁵Ba and ¹³⁷Ba) at two dose rates produces unequivocal marks on the otoliths of the coral reef grouper Epinephelus fuscoguttatus. We also assess potential negative effects on reproductive performance, egg size, condition and larval growth due to injection of adult female fish. The injection of barium isotopes at both 0.5 and 2.0 mg Ba/kg body weight into the body cavities of gravid female fish was 100% successful in the geochemical tagging of the otoliths of larvae from the first spawning after injection. The low-dose rate produced no negative effects on eggs or larvae. However, the higher dose rate of 2 mg Ba/kg produced small reductions in yolk sac area, oil globule area, standard length and head depth of pre-feeding larvae. Given the success of the 0.5 mg Ba/kg dose rate, it is clearly possible to produce a reliable mark and keep the concentration below any level that could affect larval growth or survival. Hence, enriched Ba isotope injections will provide an effective means of mass-marking grouper larvae.     

Distribution of tritium in estuarine waters: the role of organic matter

Tritium is an important environmental radionuclide whose reactivity with ligands and solids in aquatic systems is assumed to be limited. We studied the fractionation and sorption of tritium (added as tritiated water) in river water and seawater, and found that its distribution appears to be influenced by its affinity for organic matter. Tritium rapidly equilibrates with dissolved organic ligands that are retained by a reverse-phase C18 column, and with suspended sediment particles. Significantly, a measurable fraction of sorbed tritium associates with proteinaceous material that is potentially available to sediment-feeding organisms. These characteristics have not been reported previously and cannot be accounted for solely by isotopic exchange with hydrogen. Nevertheless, they are in qualitative agreement with available measurements of tritium in estuarine and coastal waters where its principal discharge is as tritiated water. Further research into the estuarine biogeochemical behaviour of tritium is required and radiological distribution coefficients and concentration factors that are assumed for this radionuclide may require reconsideration.     

Application of sludge-based carbonaceous materials in a hybrid water treatment process based on adsorption and catalytic wet air oxidation

This paper describes a preliminary evaluation of the performance of carbonaceous materials prepared from sewage sludges (SBCMs) in a hybrid water treatment process based on adsorption and catalytic wet air oxidation; phenol was used as the model pollutant. Three different sewage sludges were treated by either carbonisation or steam activation, and the physico-chemical properties of the resultant carbonaceous materials (e.g. hardness, BET surface area, ash and elemental content, surface chemistry) were evaluated and compared with a commercial reference activated carbon (PICA F22). The adsorption capacity for phenol of the SBCMs was greater than suggested by their BET surface area, but less than F22; a steam activated, dewatered raw sludge (SA_DRAW) had the greatest adsorption capacity of the SBCMs in the investigated range of concentrations (<0.05 mol L^?1). In batch oxidation tests, the SBCMs demonstrated catalytic behaviour arising from their substrate adsorptivity and metal content. Recycling of SA_DRAW in successive oxidations led to significant structural attrition and a hardened SA_DRAW was evaluated, but found to be unsatisfactory during the oxidation step. In a combined adsorption–oxidation sequence, both the PICA carbon and a selected SBCM showed deterioration in phenol adsorption after oxidative regeneration, but a steady state performance was reached after 2 or 3 cycles.     

Nonferrous metal (loid) s mediate bacterial diversity in an abandoned mine tailing impoundment

Environmental Science and Pollution Research - Migration and transformation of toxic metal (loid) s in tailing sites inevitably lead to ecological disturbances and serious threats to the...     

Facilitating Integrated Resource and Environmental Management: Australian and Canadian Perspectives

It is widely believed that improved resource and environmental management outcomes would occur if those responsible took a longer term view, considered whole systems rather than their components in isolation, and co-ordinated and integrated their activities with each other. There has been substantial action in many countries to achieve these ideals but with mixed success. Why has it not been possible to have a more co-ordinated and integrated approach to resource and environmental management (IREM)? We briefly review various conceptual issues regarding the purpose and character of IREM. The core of the paper is analysis of the factors contributing to success or failure, including the requirement that IREM, in practice, must be based on a careful analysis of the need and scope for integration in a given context, the significance of leadership, information access, and the links with other planning and management activities. Obstacles arising from these and other shortcomings, including the focus regarding what IREM involves, bureaucratic resistance, adverse financial arrangements and property rights problems, are also discussed. The paper concludes with five recommendations as to how to enhance integrated resource and environmental management dealing with need, scope and context, best management practice, information accessibility and integration, financial arrangements,and strengthening local and regional planning capacity.     

Phytotoxicity of nitroaromatic energetic compounds freshly amended or weathered and aged in sandy loam soil

The toxicities of 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrotoluene (2,4-DNT), and 2,6-dinitrotoluene (2,6-DNT) to terrestrial plants alfalfa (Medicago sativa L.), Japanese millet (Echinochloa crusgalli L.), and perennial ryegrass (Lolium perenne L.) were determined in Sassafras sandy loam soil using seedling emergence, fresh shoot, and dry mass measurement endpoints. A 13-week weathering and aging of energetic materials in soils, which included wetting and drying cycles, and exposure to sunlight of individual soil treatments, was incorporated into the study design to better reflect the soil exposure conditions in the field than toxicity determinations in freshly amended soils. Definitive toxicity tests showed that dinitrotoluenes were more phytotoxic for all plant species in freshly amended treatments based on EC20 values for dry shoot ranging from 3 to 24mgkg(-1) compared with values for TNB or TNT ranging from 43 to 62mgkg(-1). Weathering and aging of energetic materials (EMs) in soil significantly decreased the toxicity of TNT, TNB or 2,6-DNT to Japanese millet or ryegrass based on seedling emergence, but significantly increased the toxicity of all four EMs to all three plant species based on shoot growth. Exposure of the three plant species to relatively low concentrations of the four compounds initially stimulated plant growth before the onset of inhibition at greater concentrations (hormesis).