Growing hot pepper for cabbage looper, Trichopulsia ni (Hübner) and spider mite, Tetranychus urticae (Koch) control

With the public perception that synthetic pesticides leave harmful residues in crop produce for human consumption, there has been increased interest in using natural products for pest control. The potential of using fruit extracts of hot pepper for controlling the cabbage looper, Trichopulsia ni (Hübner) and spider mite, Tetranychus urticae Koch is explored in this investigation. Crude extracts from fruits of Capsicum chinense, C. frutescens, C. baccatum, and C. annuum, were prepared and tested under laboratory conditions for their insecticidal and acaricidal performance. Mortality was greatest (94%) when fruit extract of accession PI-593566 (C. annuum) was sprayed on larvae of the cabbage looper, while crude extracts of accessions PI-241675 (C. frutescens) and PI-310488 (C. annuum) were repellent to the spider mite. We investigated differences in chemical composition of the crude fruit extracts that may explain the observed differences in mortality and repellency between accessions. Gas Chromatography-Mass Spectrometry spectrometric analysis revealed that capsaicin and dihydrocapsaicin, the pungent components of pepper fruit, were not correlated with toxicity or repellency, indicating that the two capsaicinoids are not likely related to the efficacy of pepper fruit extracts. Major compounds in hot pepper fruit extracts were detected and identified as pentadecanoic acid methyl ester, hexadecanoic acid methyl ester, and octadecanoic acid methyl ester. Spectrometric analysis and toxicity to cabbage looper larvae revealed that pentadecanoic acid methyl ester is likely related to cabbage looper mortality. However, the concentration of pentadecanoic acid methyl ester in some accessions was insufficient to explain the observed mortality of cabbage looper and repellency of spider mite. Fruit extracts of accessions PI-593566 (C. annuum) and PI-241675 (C. frutescens) could be useful for managing populations of cabbage loopers and spider mites, which could reduce reliance on synthetic pesticides. Further study is needed to investigate performance of hot pepper extracts under ultra-violet light and field conditions.     

Effects of inert dust on olive (<Emphasis Type="Italic">Olea europaea</Emphasis> L.) leaf physiological parameters

BACKGROUND: Cement factories are major pollutants for the surrounding areas. Inert dust deposition has been found to affect photosynthesis, stomatal functioning and productivity. Very few studies have been conducted on the effects of cement kiln dust on the physiology of perennial fruit crops. Our goal was to study some cement dust effects on olive leaf physiology.effects on olive leaf physiology. On METHODS: Cement kiln dust has been applied periodically since April 2003 onto olive leaves. Cement dust accumulation and various leaf physiological parameters were evaluated early in July 2003. Measurements were also taken on olive trees close to the cement factory. RESULTS: Leaf dry matter content and specific leaf weight increased with leaf age and dust content. Cement dust decreased leaf total chlorophyll content and chlorophyll a/chlorophyll b ratio. As a result, photosynthetic rate and quantum yield decreased. In addition, transpiration rate slightly decreased, stomatal conductance to H2O and CO2 movement decreased, internal CO2 concentration remained constant and leaf temperature increased. DISCUSSION: The changes in chlorophyll are possibly due to shading and/or photosystem damage. The changes in stomatal functioning were possibly due to dust accumulation between the peltates or othe effects on stomata. CONCLUSIONS: Dust (in this case from a cement kiln) seems to cause substantial changes to leaf physiology, possibly leading to reduced olive productivity. RECOMMENDATIONS: Avoidance of air contamination from cement factories by using available technology should be examined together with any possible methodologies to reduce plant tissue contamination from cement dust. PERSPECTIVES: Longterm effects of dust (from cement kiln or other sources) on olive leaf, plant productivity and nutritional quality of edible parts could be studied for conclusive results on dust contamination effects to perennial crops.     

Thermal terrain modeling of spatial objects, a tool for environmental and climatic change assessment

The aim of the current research effort is to include biophysical multi-temporal data and more specifically land surface temperature (LST) in the terrain modeling process that traditionally was based only on digital elevation data processing. The terrain partition framework (spatial objects) is defined by the borderlines of prefecture authorities of Greece. Each object is represented by a set of attributes derived from the digital elevation data, and objects are organized into clusters on the basis of their terrain dependent representation. Finally, the terrain is segmented to regions on the basis of the multi-temporal LST data, each region presenting a different thermal signature. The thermal regions are used in the spatial objects parametric representation and a new index is devised (LST climatic index) expressing the biophysical suitability of spatial objects at moderate resolution scale.     

Trace metal dynamics in fishes from the southwest coast of India

The concentration of Fe, Co, Ni, Cu, Zn, Cd, and Pb in the muscle tissue of marine fishes like Lates calcarifer, Nemipterus japonicus, Caranx melampygus, Rastrelliger kanagurta, and Cyanoglossus macrostomus was estimated from samples collected in the continental shelf waters off Kochi and Mangalore on southwest coast of India. Species-specific and spatially heterogeneous patterns of tissue metals loads were apparent within the pelagic and demersal fish species for the two regions. The concentration ranges of Fe (541.60 to 649.60 ppm), Ni (12.12 to 13.92 ppm), and Cu (3.09 to 3.62 ppm) were higher in the demersal species C. melampygus, whereas Co (9.10 to 11.80 ppm) and Zn (79.30 to 84.30 ppm) were higher in the pelagic species L. calcarifer and Cd (4.35 to 6.38 ppm) were higher in the demersal species N. japonicus, possibly due to enhanced bioavailability of these metals from ecological processes associated with upwelling during the summer monsoon. The fish species showed a great capacity to accumulate metals, with highest bioaccumulation for the essential element iron and lowest bioaccumulation for the non-essential element lead. Among the demersal species, C. melampygus and N. japonicus had high concentration factors for the metals Fe (280,268 to 322,808), Ni (88,252 to 96,891), Cu (2,351 to 2,600), and Cd (29,637 to 32,404). In contrast, the pelagic species L. calcarifer and R. kanagurta had high concentration factors for the metals Zn (40,812 to 46,892), Co (280,285 to 423,037), and Pb (854 to 1,404).     

Utilizing Successive Linearization Optimization to Control the Saltwater Intrusion Phenomenon in Unconfined Coastal Aquifers in Crete,Greece

In the present work, a simulation-optimization method is employed in order to manage saltwater intrusion in two unconfined coastal aquifers in Crete, Greece. The optimization formulation seeks to maximize groundwater withdrawal rates while maintaining the saltwater intrusion front at the current location or inhibiting it at locations closer to the coast. A combination of a groundwater flow model (MODFLOW) with the Ghyben-Herzberg saltwater front approximation and a sequential implementation of the Simplex algorithm (GWM) are employed. The results show that under the current pumping strategies, the saltwater intrusion front will continue to move inland, posing a serious threat to the groundwater quality of these regions. Optimal groundwater withdrawal scenarios that take into consideration the water needs of the local communities and environmental concerns are presented and discussed. In both case studies, significant reductions in pumping are required in order for the saltwater intrusion front to retract closer to the shoreline.     

Liver lesions in demersal fishes near a large ocean outfall on the San Pedro Shelf, California

The prevalence of toxicopathic liver lesions in demersal fish on the San Pedro Shelf, California was determined for a 15-year period (1988–2003). Fish livers were sampled at fixed locations as part of the Orange County Sanitation Districts (OCSD) ocean monitoring program. Histopathological examination of selected fish liver tissues was studied to determine whether the wastewater discharge had affected fish health. The prevalence of toxicopathic lesion classes neoplasms (NEO), preneoplastic foci of cellular alteration (FCA), and hydropic vacuolation (HYDVAC) varied among species and locations. For all species sampled, severe lesions occurred in 6.2% of the fish examined (n = 7,694). HYDVAC (4.1%) was the most common toxicopathic lesion type followed by FCA (1.4%) and NEO (0.7%). HYDVAC occurred only in white croaker (Genyonemus lineatus), accounting for 84.8% of the toxicopathic lesions for this species. Prevalence of HYDVAC, NEO, and FCA in white croaker was 15.2, 2.0, and 0.7%, respectively. The prevalence of HYDVAC and NEO in white croaker increased with age and size but there was no sexual difference. A linear regression model was used for hypothesis testing to account for significant differences in fish size (and age for croakers) at the different sampling locations. This analysis showed that for HYDVAC there was no spatial or location effect for lesion rate or size/age of onset. For NEO, the model predicted that white croaker near the wastewater outfall may acquire these lesions at a smaller size/younger age, and at a higher rate, than at other sites. However, this result may be biased due to the unequal size frequency distributions and the low prevalence of NEO in white croaker at the different sampling sites. Bigmouth sole (Hippoglossina stomata) had a prevalence of FCA and NEO of 1.3 and 0.35%, respectively, but the prevalence and distribution of lesions was too few for statistical testing. There was no sexual difference for lesion prevalence in hornyhead turbot (Pleuronichthys verticalis) and the prevalence of FCA and NEO was 3.4 and 0.37%, respectively. FCA prevalence increased with size in hornyhead turbot and there were no significant spatial differences for lesion rates and fish size at lesion onset. Overall, consistent spatial differences for lesion prevalence were not demonstrated and highlight the analytical difficulties of detecting a possible point source impact when the effect is rare, correlated with the size/age structure of the population, and may be caused by exposure to unknown multiple sources. Thus, the usefulness of liver histopathology as a point-source monitoring tool is best applied to where the spatial scale of impact generally exceeds the home range of the target species.     

Evaluating Links Between Forest Harvest and Stream Temperature Threshold Exceedances: The Value of Spatial and Temporal Data

We present the results of a replicated before‐after‐control‐impact study on 33 streams to test the effectiveness of riparian rules for private and State forests at meeting temperature criteria in streams in western Oregon. Many states have established regulatory temperature thresholds, referred to as numeric criteria, to protect cold‐water fishes such as salmon and trout. We examined across‐year and within‐year patterns of exceedance at control and treatment stream temperature probes. Determining whether an exceedance at the downstream end of a harvest was unambiguously related to harvest proved surprisingly difficult. The likelihood of a site exceeding its numeric criterion appeared related, in part, to the site's preharvest temperature range. Four control reaches as well as three preharvest treatment reaches exceeded their numeric criteria, necessitating additional analysis to evaluate timber harvest impacts. Nine percent of sites (3 of 33) both exceeded their numeric criteria and exhibited a potential harvest effect (16.7% of private sites [3 of 18], 0% of State sites [0 of 15]). After harvest, exceedances were typically observed in only the first of the two post‐harvest years. These findings highlight the importance of including temporal and spatial controls in temperature assessments of numeric criteria when the assessment's purpose is to determine whether exceedances are related to human activities.     

Operationalising just sustainability: towards a model for place-based governance

As the concept of sustainability broadens to include social aspects, sustainability organisations must embrace strategies that allow them to more effectively address community issues and procedural concerns. Biosphere reserves (BRs) and model forests (MFs) advocate strongly for community engagement to achieve place-based sustainability; in practice, however, these organisations have had variable success in effectively engaging community residents and addressing their needs and interests. In this paper, we offer a framework for place-based governance for sustainability that is used to compare strategies used in BRs and MFs operating in the Maritime Provinces of Canada with the operations of Vibrant Communities, an anti-poverty organisation that operates locally in Saint John, New Brunswick. We draw attention to three imperatives: comprehensive understanding, community empowerment, and community-based outcomes, and five procedural drivers: local leadership, strong networks, diverse community engagement, learning together, and information sharing. Based on our results, we provide greater clarity on processes that address the imperatives and mobilise the drivers of effective place-based governance for sustainability. Our results suggest that there is a need for theory and practice to advance beyond current understandings of sustainability governance to enhance the capacity of organisations seeking to implement community-based sustainability strategies.