Acid deposition and watershed characteristics in relation to lake chemistry in northeastern Minnesota

The relationship between lake sensitivity to atmospheric acidic inputs and the neutralization capacity of watersheds is examined for 267 lakes in northeastern Minnesota. Three water chemistry/sensitivity measures (color, sulfate, and alkalinity) are correlated with variables representative of precipitation and sulfate inputs, hydrology, and the acid neutralization capacity of various watershed components. An ordinal scale for ranking bedrock and surficial deposit neutralization capacity is presented. The watershed variables found to account for the largest percentages of the variability in measured color, sulfate, and alkalinity levels are determined. Color is strongly related to the presence of peat or marsh and hydrologic renewal time, whereas sulfate is primarily related to atmospheric deposition, evaporative concentration, bedrock type, and the presence of coniferous forest. Variation in alkalinity is the most difficult of the water chemistry measures to explain; for headwater lakes, atmospheric sulfate input, water renewal time, the presence of deciduous forest, and the weatherability of underlying bedrock determine much of its variability. The results illustrate important averaging properties of watersheds from small headwater systems to large drainages and the difficulty in obtaining correlations for some water quality measures (e.g., alkalinity) when some variables, such as soils and land cover, are available only as large-area averages.     

Sorption of atmospheric ammonia by soil and perennial grass downwind from two large cattle feedlots

Livestock manure in feedlots releases ammonia (NH3), which can be sorbed by nearby soil and plants. Ammonia sorption by soil and its effects on soil and perennial grass N contents downwind from two large cattle feedlots in Alberta, Canada were investigated from June to October 2002. Atmospheric NH3 sorption was measured weekly by exposing air-dried soil at sampling points downwind along 1700-m transects. The amount of NH3 sorbed by soil was 2.60 to 3.16 kg N ha(-1) wk(-1) near the source, declining to about 0.25 kg N ha(-1) wk(-1) 1700 m downwind, reflecting diminishing atmospheric NH3 concentrations. Ammonia sorption at a control site away from NH3 sources was much lower: 0.085 kg N ha(-1) wk(-1). Based on these rates, about 19% of emitted NH3 is sorbed by soil within 1700 m downwind of feedlots. Field soil and grass samples from the transect lines were analyzed for total N (TN) and KCl-extractable N content (soil only). Nitrate N content in field soil followed a trend similar to that of atmospheric NH3 sorption. Soil TN contents, because of high background levels, showed no clear pattern. The TN content of grass, downwind of the newer feedlot, followed a pattern similar to that of NH3 sorption; downwind of the older feedlot, grass TN was correlated to soil TN. Our results suggest that atmospheric NH3 from livestock operations can contribute N to local soil and vegetation, and may need to be considered when determining fertilizer rates and assessing environmental impact.     

Metal leachability, heavy metals, polycyclic aromatic hydrocarbons and polychlorinated biphenyls in fly and bottom ashes of a medical waste incineration facility

Medical waste from hospitals and other healthcare institutions has become an imperative environmental and public safety problem. Medical waste in Greece has become one of the most urgent environmental problems, because there are 14,000 tons produced annually, of which only a small proportion is incinerated. In the prefecture of Attica there is only one modern municipal medical waste incinerator (started 2004) burning selected infectious hospital waste (5-6 tons day(-1)). Fly and bottom residues (ashes) are collected and stored temporarily in barrels. High values of metal leachability prohibit the landfilling of these ashes, as imposed by EU directives. In the present study we determined quantitatively the heavy metals and other elements in the fly and bottom ashes of the medical waste incinerator, by inductively coupled plasma emission spectrometry (ICP) and by energy dispersive X-ray analysis (EDAX). Heavy metals, which are very toxic, such as Pb, Cd, Ni, Cr, Cu and Zn were found in high concentrations in both fly and bottom ashes. Metal leachability of fly and bottom ashes by water and kerosene was measured by ICP and the results showed that toxic metals in both ashes, such as Pb, Cr, Cd, Cu and Zn, have high leaching values. These values indicate that metals can become soluble and mobile if ash is deposited in landfills, thus restricting their burial according to EU regulations. Analysis of polychlorinated biphenyls and polycyclic aromatic hydrocarbons in fly and bottom ashes showed that their concentrations were very low. This is the first known study in Greece and the results showed that incineration of medical waste can be very effective in minimizing the most hazardous and infectious health-care waste. The presence of toxic metals with high leachability values remains an important draw back of incineration of medical waste and various methods of treating these residues to diminish leaching are been considered at present to overcome this serious technical problem.     

Treatment of food industry waste by bench-scale upflow anaerobic sludge blanket-anoxic-aerobic system.

An upflow anaerobic sludge blanket (UASB)-anoxicaerobic system was used for treatment of tomato and bean processing wastewater. At various hydraulic retention times, ranging from 0.7 to 5 days, excellent removal of chemical oxygen demand (COD), biochemical oxygen demand (BOD), total suspended solids (TSS), ammonia-nitrogen (NH4-N), and total Kjeldahl nitrogen was achieved with final effluent BOD/TSS/NH4N concentrations of less than 15/15/1 mg/L. Biogas yield in the UASB reactor varied from 0.33 to 0.44 m3/kgCODremoved. The kinetics of anaerobic treatment were investigated. The yield coefficient was 0.03 gVSS/gCOD; maximum specific growth rate was 0.24 day(-1); Monod half velocity constant was 135 mgCOD/L; and specific substrate utilization rate was 3.25 gCOD/gVSS x d. Nitrification and denitrification kinetics were studied in batch experiments, and the rates were comparable with those in the continuous flow system.     

RELATIONSHIPS BETWEEN PARTICLE MOVEMENT AND CHANNEL MORPHOLOGY IN SOME NORTHERN IDAHO STREAMS1

ABSTRACT: Data were collected in 1992 from 17 mountain streams located within fine- to coarse-grained schist formations on the Idaho Panhandle National Forests. These were used to examine predictive relationships potentially useful in monitoring stream channel stability and fishery habitat. Channel morphology, sediment, and lithological data were obtained at 123 riffle sites. An analysis of materials deposited on gravel bars showed that at most sites, critical grain size, calculated using Duboy's tractive force equation, often does not provide accurate estimates of particle sizes moved at bankfull discharge. The tractive force equation gave reasonable estimates (± 10 mm) at 16 percent of the sites, but significantly over- or underestimated the sizes at the remaining sites. Regression and discriminant analysis showed that the relationship between critical grain size and the geometric mean diameter of material deposited on gravel bars was influenced most by the substrate size, slope, and width-to-depth ratio. Similarly, lithology was correlated with the size of particles moved. Particle sizes moved at bankfull discharge were not well correlated with residual pool depth or pool length.     

The experience of waste minimization at a nitrocellulose manufacturing plant

This article describes how Taiwan nitrocellulose industrial company (TNC) applies the structured methodology developed by the U.S. environmental protection agency (USEPA) to reduce, recycle and recover the wastes generated at its Taoyuan plant. The company has generated significantly less amounts of wastes, improved the competitiveness in the international market and met more stringent environmental regulations since conducting the minimization program in the late 1980s. The experience gained at the Taoyuan plant is being applied to other plants in China and Philippines.     

Assessment of vulnerability of the eastern Cretan beaches (Greece) to sea level rise

Beaches are both sensitive and critical components of the coastal systems, as they are particularly vulnerable to environmental change (e.g., the sea level rise) and form valuable coastal ecosystems and economic resources. The objective of the present study has been to record the spatial characteristics and other attributes (e.g., topography, sediments and accessibility) of the 71 beaches of the E. Crete (Eastern Mediterranean) that are either already developed or have a reasonable development potential and assess their erosion risk under sea level rise. Beach retreats are predicted by ensembles of six cross-shore (1D) analytical and numerical morphodynamic models, set up/forced on the basis of collected/collated information and three sea level rise scenarios (0.26, 0.82 and 1.86 m); these retreats are then compared with the recorded maximum (dry) beach widths. Projections by the unified ensemble suggest that, in the case of a 0.26 m rise, 80 % of the examined beaches are to retreat by more than 20 and 16 % by more than 50 % of their maximum dry width. In the case of a 0.82 m rise, 72 % of the tested beaches are predicted to retreat by more than 50 % of their dry width and 21 % by a distance at least equal to their observed maximum dry widths. A sea level rise of 1.86 m represents a ‘doom’ scenario, as 75 % of the beaches are predicted to retreat by more than their maximum width. These results may be conservative, as other significant beach erosion factors (e.g., decreasing beach sediment supply) have not been considered.     

Long-path FTIR Measurements of Volatile Organic Compounds in an Industrial Setting

A long-path Fourier transform spectrometer was used to make measurements of volatile organic compounds in an industrial complex in New Castle, Delaware as part of the Superfund Innovative Technology Evaluation (SITE) program. These data are compared to data taken with a whole-air canister technique. To provide an effective comparison the canisters were transported along the path for a 32-min period. For each FTIR spectrum, 256 interferograms were co-added over a 4-mln period. Eight individual spectra were then co-added to obtain the comparison data.     

Enzymatic activity and half-lives of capsaicin,dihydrocapsaicin, and pentadecanoic acid methyl ester in soil sprayed with hot pepper extract

Pest management is facing economic and ecological challenges in the United States and worldwide due to pest resistance, human and environmental hazards caused by use of synthetic pesticides. Natural product-based pesticides offer advantages that they are specific to the target species and typically have unique modes of action with little mammalian toxicity. Studies conducted at Kentucky State University revealed that the insecticidal and acaricidal performance of crude extracts from the fruits of Capsicum species justified the need for developing a natural pesticide formulation for agricultural use. Analysis of hot pepper extracts indicated the presence of three compounds having pesticidal efficacy: capsaicin, dihydrocapsaicin, and pentadecanoic acid methyl ester. The main objectives of this investigation were to: i) determine the half-live (T_1/2 value) of capsaicin, dihydrocapsaicin, and pentadecanoic acid methyl ester in soil sprayed with hot pepper formulation and ii) assess the impact of hot pepper formulation on total soil enzyme activity. Analysis of soil sprayed with pepper extracts indicated that T_1/2 values of capsaicin, dihydrocapsaicin, and pentadecanoic acid methyl ester were 7.3, 1.5, and 10.2 d, respectively. Hydrolysis of the fluorescein diacetate [3, 6-diacetylfluorescein (FDA)], used for measuring overall soil enzyme activities, indicated that total enzyme activities was slightly enhanced by 2% in soil sprayed with hot pepper extracts.