The impact of COVID-19 pandemic on air pollution: a global research framework,challenges, and future perspectives

Environmental Science and Pollution Research - As a result of extreme modifications in human activity during the COVID-19 pandemic, the status of air quality has recently been improved. This...     

Using organoclays to enhance carbon filtration

Organoclays have found increased acceptance as pre-treatment for activated carbon adsorption systems in both groundwater and wastewater cleanup. The reason is that activated carbon tends to become quickly blinded by large organic molecules of low solubility, particularly oils. However, it is also well established that activated carbon is more efficient at low concentrations of organic contaminants than at higher ones, i.e. at less than 1 ppm. With organoclays it is exactly the opposite, they are better at removing organics at higher concentrations, above 3 ppm. Therefore it is cost effective in these applications to use two or more vessels in series, the first one filled with organoclay, the remainder with activated carbon. The economics make sense, even though the organoclay is not regenerated, because of the reduction in down time every time a carbon vessel has to be changed out. Use of organoclays increases the volume treated by carbon in many applications seven to nine fold. In the case of other organic contaminants, as the aqueous solubility increases, the efficiency decreases, except in the case of methylene chloride, which it removes at far higher efficiency then carbon. This article presents the results of a series of tests, including Kd determinations, jar tests, and mini-column tests. These tests determined the adsorption capacity and efficiency of organoclay and activated carbon for the removal of benzene, toluene, xylene and naphtalene from water. These tests were followed by adding the four compounds into one container to see if the combination of organoclay, followed by carbon, would be more efficient then each sorbent alone. The tests also compared the efficiency of organoclay versus carbon for the removal of various oils from water.     

Estimating Sediment and Nutrient Loads in Four Western Lake Superior Streams

Total suspended solids (TSS) and total phosphorus (TP) have been shown to be strongly correlated with turbidity in watersheds. High‐frequency in situ turbidity can provide estimates of these potential pollutants over a wide range of hydrologic conditions. Concentrations and loads were estimated in four western Lake Superior trout streams from 2005 to 2010 using regression models relating continuous turbidity data to grab sample measures of TSS and TP during differing flow regimes. TSS loads estimated using the turbidity surrogate were compared with those made using FLUX software, a standard assessment technique based on discharge and grab sampling for TSS. More traditional rating curve methodology was not suitable because of the high variability in the particulates vs. discharge relationship. Stream‐specific turbidity and TSS data were strongly correlated (r² = 0.5 to 0.8; p < 0.05) and less so for TP (r² = 0.3 to 0.7; p < 0.05). Near‐continuous turbidity monitoring (every 15 min) provided a good method for estimating both TSS and TP concentration, providing information when manual sample collection was unlikely, and allowing for detailed analyses of short‐term responses of flashy Lake Superior tributaries to highly variable weather and hydrologic conditions while the FLUX model typically resulted in load estimates greater than those determined using the turbidity surrogate, with 17/23 stream years having greater FLUX estimates for TSS and 18/23 for TP.     

Concentrations of persistent organic pollutants and organic matter characteristics as river sediment quality indices

Selected persistent organic pollutants – polycyclic aromatic hydrocarbons, polychlorinated biphenyls, and organochlorine pesticides – were determined in sediments, soils, and crops from the Asopos River area, Greece. The river has been receiving industrial effluents for the last 40 years and has been recently found to be polluted with metals. Sediments were collected in the dry (May) and wet (February) season. Agricultural soils and cultivated crops were sampled from adjacent fields. Polychlorinated biphenyls were below the limit of detection in all samples. In one tomato and two soil samples, DDT and DDE were found. Polycyclic aromatic hydrocarbons were observed in 5% of the sediments and in concentrations ranging from 4 to 57 μg kg^?1 dry weight, quite below sediment quality guidelines. Diagnostic ratios of polycyclic aromatic hydrocarbons indicated a strong influence of petrogenic point discharges. In the sediments, silicate minerals dominate over carbonates and the organic carbon content ranges from 0.4% to 3.5%, more than 70% being of natural origin. Compared to other rivers worldwide, the Asopos River was found to be not contaminated with persistent organic pollutants. Point loadings of organic pollutants were evident but continuous discharge is not occurring throughout the river basin.     

Age and growth rates of Hawaiian hawksbill turtles (Eretmochelys imbricata) using skeletochronology

The Hawaiian hawksbill population has fewer than 20 females nesting per year; hence, there is a need to monitor this population closely and basic biological information on individual growth and age to maturity is critical. We present a skeletochronology analysis of Hawaiian hawksbills using humeri recovered from 30 dead stranded hawksbills, plus 10 dead hatchlings. Growth mark morphology shows readily distinguishable marks similar in appearance to other species, though some animals displayed more diffuse marks. Growth rates remained high (average 2.24–4.77 cm year^?1) from 20 to 80 cm straight carapace length (SCL). Hawksbills larger than 80 cm SCL had average growth rates of 0.3 cm year^?1. There were few adult turtles in the sample; however, results indicate hawksbills have faster growth rates than loggerhead or green turtles, with probable average age to maturity (at size 78.6 cm SCL) occurring between 17 and 22 years.     

Analytical studies on the pollution of argeş river

Using two analytical techniques (ICP‐AES and ASV) the heavy metal pollution of Arge? River was studied. These techniques are characterized by similar analytical performances.

The samples were collected from 13 sites starting from Capra Lake (altitude 2241 m) and finishing at Oltenita city (altitude 10 m).

Arge? River is the fifth longest river in Romania after Siret, Mure?, Olt and Some?, its length is 340 km and the river flows through four cities, Curtea de Arge?, Pite?ti, Gae?ti and Oltenita.

The results of the determinations of Cu, Cd, Zn and Pb, indicate that the Arge? River shows relatively low pollution.     

Climate change and the cost of conserving species in Madagascar

We examined the cost of conserving species as climate changes. We used a Maxent species distribution model to predict the ranges from 2000 to 2080 of 74 plant species endemic to the forests of Madagascar under 3 climate scenarios. We set a conservation target of achieving 10,000 ha of forest cover for each species and calculated the cost of achieving this target under each scenario. We interviewed managers of projects to restore native forests and conducted a literature review to obtain the net present cost per hectare of management actions to maintain or establish forest cover. For each species, we added hectares of land from lowest to highest cost per additional year of forest cover until the conservation target was achieved throughout the time period. Climate change was predicted to reduce the size of species' ranges, the overlap between species' ranges and existing or planned protected areas, and the overlap between species' ranges and existing forest. As a result, climate change increased the cost of achieving the conservation target by necessitating successively more costly management actions: additional management within existing protected areas (US$0-60/ha); avoidance of forest degradation (i.e., loss of biomass) in community-managed areas ($160-576/ha); avoidance of deforestation in unprotected areas ($252-1069/ha); and establishment of forest on nonforested land within protected areas ($802-2710/ha), in community-managed areas ($962-3226/ha), and in unprotected areas ($1054-3719/ha). Our results suggest that although forest restoration may be required for the conservation of some species as climate changes, it is more cost-effective to maintain existing forest wherever possible.     

Determining shark size from forensic analysis of bite damage

Bite damage patterns have long been used to estimate shark species and body size, with somewhat limited success. The lack of fit between damage patterns and shark size is partially due to variation in tooth size and shape within an individual. The ability to accurately predict body size from bite patterns is important for better understanding the ecological and behavioral underpinnings of shark bites/attacks on marine organisms, humans, and submarine equipment. To this end, we measured interdental distance (IDD) between the most labial teeth in the first six tooth files on both the upper and lower jaws, as well as the circumference of the portion of each jaw that bears teeth, for prepared jaw sets from fourteen shark species and regressed these data against total length. IDD is allometric as well as an accurate predictor of total length in all species examined, except Carcharhinus acronotus. Tooth-bearing circumference is also allometric and predictive of total length in all species. Though considerable overlap exists in IDD and circumference ranges among species for the total length ranges examined, Carcharodon carcharias and Isurus sp. can be differentiated from Carcharhinus limbatus, Carcharhinus brevipinna, and C. acronotus based on these values alone. When combined with knowledge of species-specific feeding behavior, geographic distribution, and habitat preferences, these simple measures from bite damage patterns allow quick, accurate assessment of shark size and potential species.     

Sperm design and variation in the New World blackbirds (Icteridae)

Post-copulatory sexual selection (PCSS) is thought to be one of the evolutionary forces responsible for the rapid and divergent evolution of sperm design. However, whereas in some taxa particular sperm traits are positively associated with PCSS, in other taxa, these relationships are negative, and the causes of these different patterns across taxa are poorly understood. In a comparative study using New World blackbirds (Icteridae), we tested whether sperm design was influenced by the level of PCSS and found significant positive associations with the level of PCSS for all sperm components but head length. Additionally, whereas the absolute length of sperm components increased, their variation declined with the intensity of PCSS, indicating stabilising selection around an optimal sperm design. Given the diversity of, and strong selection on, sperm design, it seems likely that sperm phenotype may influence sperm velocity within species. However, in contrast to other recent studies of passerine birds, but consistent with several other studies, we found no significant link between sperm design and velocity, using four different species that vary both in sperm design and PCSS. Potential reasons for this discrepancy between studies are discussed. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.