Statistical evaluation of an analytical IC method for the determination of trace level perchlorate

Trace level perchlorate analysis in water initiated a new development in the Ion Chromatography (IC) technology. Maintenance of a low detection limit may be highly affected by the operating conditions of the IC system. In this paper the homoscedasticity of the IC system within the calibration concentration range, the effect of the system drift on the calibration curve and the effect of the self regeneration suppressor (SRS) current on the detection limit were investigated. The experimental results were evaluated by statistical methods such as the Cochran test and the lack of fit test. The detection limits were obtained by two ways. One through method detection limit (MDL) and the other through detection limit from the calibration curve (DTC). The Cochran test results revealed the homoscedasticity of the IC system. The effect of system drift on the calibration curve was noticed by the lack of fit test. MDL yielded a lower but less reliable detection limit than DTC. An acceptable detection limit can be achieved under the lower SRS current (100 mA).     

Lac Dufault sediment core trace metal distribution, bioavailability and toxicity to Hyalella azteca

To determine changes in metal distribution, bioavailability and toxicity with sediment depth, two 20-cm-long replicate cores were collected from a lake historically subjected to the influence of metal mining and smelting activity. The vertical distribution of Pb, Cd and Cu in sediment was similar for all three metals, with the surface layers showing enrichment and the deeper (pre-industrial) layers showing lower concentrations. Toxicity of each sediment core section was determined in laboratory tests with the freshwater amphipod Hyalella azteca. Bioavailable metal in each sediment slice was estimated from metal concentrations in overlying water in these toxicity tests and, for Cd, also from metal bioaccumulation. The profile for Cd in tissue was comparable to Cd in sediment and overlying water, but relative Cd bioavailability from sediment increased with sediment depth. Survival increased with increasing sediment depth, suggesting that surface sediments were probably less or non-toxic before industrialization.     

Development of an empirical model to estimate real-world fine particulate matter emission factors: the traffic air quality model

The purpose of the study was to quantify the impact of traffic conditions, such as free flow and congestion, on local air quality. The Borman Expressway (I-80/94) in Northwest Indiana is considered a test bed for this research because of the high volume of class 9 truck traffic traveling on it, as well as the existing and continuing installation of the Intelligent Transportation System (ITS) to improve traffic management along the highway stretch. An empirical traffic air quality (TAQ) model was developed to estimate the fine particulate matter (PM2.5) emission factors (grams per kilometer) based solely on the measured traffic parameters, namely, average speed, average acceleration, and class 9 truck density. The TAQ model has shown better predictions that matched the measured emission factor values more than the U.S. Environmental Protection Agency (EPA)-PART5 model. During congestion (defined as flow-speeds < 50 km/hr [30 mi/hr]), the TAQ model, on average, overpredicted the measured values only by a factor of 1.2, in comparison to a fourfold underprediction using the EPA-PART5 model. On the other hand, during free flow (defined as flow-speeds > 80 km/hr [50 mi/hr]), the TAQ model was conservative in that it overpredicted the measured values by 1.5-fold.     

CONSTRAINTS IN WATER MANAGEMENT ON AGRICULTURAL LANDS1

ABSTRACT Whether the goal is minimizing water quality degradation in receiving streams or maximizing agricultural production on existing croplands; the solutions are identical - improved water management practices. Technology has succeeded in developing feasible solutions to improving irrigation water management, but the law has been slow to encourage or direct implementation. The villain of the western United States water problem is the property right concept of the appropriation doctrine. Improving water management also implies organizational improvements. Also, the so-called “human factor” involves questions of inefficiency and ineffectiveness, that when examined under the criteria of efficacy, may dictate a policy of continuing present practices in certain localities or regions with little technological intervention. The present effort for improving water quality management implies, therefore, a manyfold attack aimed at increasing project irrigation efficiency and effectiveness, under the larger rubric of efficacy and the achievement of larger social goals.     

TOWARD A BETTER UNDERSTANDING OF RECREATIONAL BOATING IN THE ADIRONDACK LAKES REGION1

ABSTRACT: Results of a study to determine the relationship between physical characteristics of Adirondack lakes and variations in peak boat-use intensity indicated that 69 percent of the variation in peak use can be accounted for by the number of public and commercial boat-launching facilities per mile of lake shoreline. Other lake characteristics related to peak boat use were: the number of commercial overnight accommodations available, number of boat slips, lake size, and miles of lake shoreline. Lake characteristics not related to peak use were: accessibility, configuration, tent spaces available, surrounding landscape quality, volume of traffic and availability of other lakes. This information should provide recreation managers and planners with a better understanding of factors related to variation in peak boating-use periods.     

A national critical loads framework for atmospheric deposition effects assessment: IV. Model selection,applications, and critical loads mapping

The critical loads approach is emerging as an attractive means for evaluating the effects of atmospheric deposition on sensitive terrestrial and aquatic ecosystems. Various approaches are available for modeling ecosystem responses to deposition and for estimating critical load values. These approaches include empirical and statistical relationships, steady-state and simple process models, and integrated-effects models. For any given ecosystem, the most technically sophisticated approach will not necessarily be the most appropriate for all applications; identification of the most useful approach depends upon the degree of accuracy needed and upon data and computational requirements, biogeochemical processes being modeled, approaches used for representing model results on regional bases, and desired degree of spatial and temporal resolution. Different approaches are characterized by different levels of uncertainty. If the limitations of individual approaches are known, the user can determine whether an approach provides a reasonable basis for decision making. Several options, including point maps, grid maps, and ecoregional maps, are available for presenting model results in a regional context. These are discussed using hypothetical examples for choosing populations and damage limits. The research described in this article has been funded by the US Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, Oregon, through contract #68-C8-0006 with ManTech Environmental Technology, Inc., and Interagency Agreement #1824-B014-A7 with the U.S. Department of Energy and at Oak Ridge National Laboratory managed by Martin Marietta Energy Systems, Inc., under Contract DE-AC05-84OR21400 with the US Department of Energy. Environmental Sciences Division Publication No. 3904. It has been subjected to the agency’s peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.     

A national critical loads framework for atmospheric deposition effects assessment: II. Defining assessment end points,indicators, and functional subregions

The United States Environmental Protection Agency, with support from the US Department of Energy and the National Oceanographic and Atmospheric Administration, has been evaluating the feasibility of an effects-based (critical loads) approach to atmospheric pollutant regulation and abatement. The rationale used to develop three of the six steps in a flexible assessment framework (Strickland and others, 1992) is presented along with a discussion of a variety of implementation approaches and their ramifications. The rationale proposes that it is necessary to provide an explicit statement of the condition of the resource that is considered valuable (assessment end point) because: (1) individual ecosystem components may be more or less sensitive to deposition, (2) it is necessary to select indicators of ecosystem condition that can be objectively measured and that reflect changes in the quality of the assessment end point, and (3) acceptable status (i.e., value of indicator and quality of assessment end point at critical load) must be defined. The rationale also stresses the importance of defining the assessment regions and subregions to improve the analysis and understanding of the indicator response to deposition. Subregional definition can be based on a variety of criteria, including informed judgment or quantitative procedures. It also depends on the geographic scale at which exposure and effects models are accurate and on data availability, resolution, and quality. The research described in this article has been funded by the US Environmental Protection Agency. This document has been prepared at the EPA Environmental Research Laboratory in Corvallis, Oregon, through contract #68-C8-0006 with ManTech Environmental Technology, Inc., and Interagency Agreement #1824-B014-A7 with the US Department of Energy and at Oak Ridge National Laboratory managed by Martin Marietta Energy Systems, Inc., under Contract DE-AC05-84OR21400 with the US Department of Energy. Environmental Sciences Division Publication No. 3903. It has been subjected to the agency’s peer and administrative review and approved for publication. Mention of trade names or commercial products does not constitute endorsement or recommendation for use.