Odor Determination Techniques for Air Pollution Control

Abstract

An airborne lidar was used to study the smoke plume from the burning of a controlled oil spill on the ocean. The ratio of the amount of light (at a wavelength, λ, of 0.532 u.m) backscattered by the smoke to the amount of light extinguished by the smoke was determined by measuring the strength of a laser beam after it had passed through the smoke plume, been reflected from the ocean, and passed through the smoke plume again, and comparing this to the strength of the laser beam reflected directly from the ocean. The optical depth of the smoke (at λ = 0.532 µm) was typically between 0.2 and 0.5. The mass fluxes of smoke particles that passed through four vertical cross sections of the (nonsteady state) smoke plume were estimated from lidar measurements to be 142, 175, 423, and 414 g ^s-1, compared to an average smoke mass production rate of ~770 g s^-1. The spatial distribution of smoke mass along the long axis of the plume was also estimated from the lidar measurements; derived smoke mass concentrations were generally <300 µg ^m-3, with a few isolated values up to ~800 µg ^m-3.     

Ozone Air Quality over North America: Part II—An Analysis of Trend Detection and Attribution Techniques

ABSTRACT

Assessment of regulatory programs aimed at improving ambient O₃ air quality is of considerable interest to the scientific community and to policymakers. Trend detection, the identification of statistically significant long-term changes, and attribution, linking change to specific clima-tological and anthropogenic forcings, are instrumental to this assessment. Detection and attribution are difficult because changes in pollutant concentrations of interest to policymakers may be much smaller than natural variations due to weather and climate. In addition, there are considerable differences in reported trends seemingly based on similar statistical methods and databases. Differences arise from the variety of techniques used to reduce nontrend variation in time series, including mitigating the effects of meteorology and the variety of metrics used to track changes. In this paper, we review the trend assessment techniques being used in the air pollution field and discuss their strengths and limitations in discerning and attributing changes in O₃ to emission control policies.     

Ozone Air Quality over North America: Part I—A Review of Reported Trends

ABSTRACT

Ozone and precursor trends can be used to measure the effectiveness of regulatory programs that have been implemented. In this paper, we review trends in the concentrations of O₃, NO_x, and HCs over North America that have been reported in the literature. Although most existing trend studies are confounded by meteorological variability, both the raw data trends and the trends adjusted for meteorology collectively indicate a general decreasing trend in O concentrations in most areas of the United States during 1985-1996. In Canada, mean daily maximum 1-hr O₃ concentrations at urban sites show mixed trends with a majority of sites showing an increase from 1980 to 1993. Mean daily maximum 1-hr O₃ at most regionally representative Canadian sites appears to decrease from 1985 to 1993 or shows no significant change. There are far fewer data and analyses of NO_x and HC trends. Available studies covering various ranges of years indicate decreases in ambient NO_x and HC concentrations in Los Angeles, CA, decreases in HC concentrations in northeastern U.S. cities, and decreases in NO concentrations in Canadian cities. Two key needs are long-term HC and NO_x measurements, particularly at rural sites, and a systematic comparison of trend detection techniques on a reference data set.     

Spatial environmental efficiency indicators in regional waste generation: a nonparametric approach

This paper computes and analyses, for the first time, environmental efficiencies in waste generation of 116 European regions in NUTS 2 level in five European countries over the period of 2008–2010. For this reason, different data envelopment analysis (DEA) model formulations are used for modeling the pollutant in the form of waste generation as a regular output and as a regular input. In the latter case, we also use the notion of eco-efficiency. The empirical findings reveal environmental inefficiencies among the regions, indicating the lack of a uniform regional environmental policy among the European countries. This finding is observed not only for regions between different countries but also among the regions within countries, implying the need for implementation of unified appropriate municipal environmental policies in waste management.     

Coagulation of highly turbid suspensions using magnesium hydroxide: effects of slow mixing conditions

Laboratory experiments were carried out to study the effects of slow mixing conditions on magnesium hydroxide floc size and strength and to determine the turbidity and total suspended solid (TSS) removal efficiencies during coagulation of highly turbid suspensions. A highly turbid kaolin clay suspension (1,213?±?36 nephelometric turbidity units (NTU)) was alkalized to pH 10.5 using a 5 M NaOH solution; liquid bittern (LB) equivalent to 536 mg/L of Mg²⁺ was added as a coagulant, and the suspension was then subjected to previously optimized fast mixing conditions of 100 rpm and 60 s. Slow mixing speed (20, 30, 40, and 50 rpm) and time (10, 20, and 30 min) were then varied, while the temperature was maintained at 20.7?±?1 °C. The standard practice for coagulation-flocculation jar test ASTM D2035-13 (2013) was followed in all experiments. Relative floc size was monitored using an optical measuring device, photometric dispersion analyzer (PDA 2000). Larger and more shear resistant flocs were obtained at 20 rpm for both 20- and 30-min slow mixing times; however, given the shorter duration for the former, the 20-min slow mixing time was considered to be more energy efficient. For slow mixing camp number (Gt) values in the range of 8,400–90,000, it was found that the mixing speed affected floc size and strength more than the time. Higher-turbidity removal efficiencies were achieved at 20 and 30 rpm, while TSS removal efficiency was higher for the 50-rpm slow mixing speed. Extended slow mixing time of 30 min yielded better turbidity and TSS removal efficiencies at the slower speeds.     

Sustainable Development in an N-Rich/N-Poor World

Sustainable development requires that per capita inclusive wealth—produced, human, and natural capital—does not decline over time. We investigate the impact of changes in nitrogen on inclusive wealth. There are two sides to the nitrogen problem. Excess use of nitrogen in some places gives rise to N-pollution, which can cause environmental damage. Insufficient replacement of nitrogen in other places gives rise to N-depletion, or loss of nutrient stocks. Neither is explicitly accounted for in current wealth measures, but both affect wealth. We calculate an index of net N-replacement, and investigate its relationship to wealth. In countries with low levels of relative N-loss, we find that the uncompensated loss of soil nitrogen in poorer countries is associated with declining rates of growth of inclusive per capita wealth. What is less intuitive is that increasing fertilizer application in both rich and poor countries can increase per capita inclusive wealth.     

The challenge of adapting centralised electricity systems: peak demand and maladaptation in South East Queensland,Australia

South East Queensland’s (SEQ’s) centralised electricity system is under great pressure to adapt. Climate change is converging with socio-economic, demographic and technological changes to create a ‘perfect storm’ for the region’s electricity system. Distribution networks are particularly affected, with these factors contributing to tremendous peak demand growth, about double the rate of growth in average demand in recent years. This paper reviews how Australia’s electricity system is adapting to multiple drivers of peak electricity demand. We use socio-technical transitions theory to understand the temporal interconnected social and technical dimensions of adaptation in this setting. Specifically, we present an historical narrative of the emergence of centralisation in Australia and outline the peak demand problem in SEQ and review adaptation options from the international literature. We also analyse the interactions between key social groups and their adaptation responses over the past decade. Our analysis shows that adaptation has become a contested process between supply-chain actors and end-users, each with different economic objectives, adaptation needs and capacities. The resulting adaptation dynamic that is emerging shows worrying signs of maladaptation. Implications for market governance and urban policy and research are discussed.     

Lead-Free Hunting Rifle Ammunition: Product Availability, Price, Effectiveness, and Role in Global Wildlife Conservation

Proposals to end the use of lead hunting ammunition because of the established risks of lead exposure to wildlife and humans are impeded by concerns about the availability, price, and effectiveness of substitutes. The product availability and retail prices of different calibers of lead-free bullets and center-fire rifle ammunition were assessed for ammunition sold in the USA and Europe. Lead-free bullets are made in 35 calibers and 51 rifle cartridge designations. Thirty-seven companies distribute internationally ammunition made with lead-free bullets. There is no major difference in the retail price of equivalent lead-free and lead-core ammunition for most popular calibers. Lead-free ammunition has set bench-mark standards for accuracy, lethality, and safety. Given the demonstrated wide product availability, comparable prices, and the effectiveness of high-quality lead-free ammunition, it is possible to phase out the use of lead hunting ammunition world-wide, based on progressive policy and enforceable legislation.     

Chemometric study on the trace metal accumulation in the sediments of the Cochin Estuary―Southwest coast of India

The distribution and accumulation of trace metals in the sediments of the Cochin estuary during the pre-monsoon, monsoon and post-monsoon periods were investigated. Sediment samples from 14 locations were collected and analysed for the metal contents (Mg, Cr, Mn, Fe, Co, Ni, Cu, Zn, Cd and Pb), organic carbon, total nitrogen, total sulphur and grain size. The data were processed using statistical tools like correlation, factor and cluster analysis. The study revealed an enrichment of Cd and Zn in the study area particularly at station 2, which is confirmed by enrichment factor, contamination factor and geoaccumulation index. The factor analysis revealed that the source of Cd and Zn may be same. The study indicated that the spatial variation for the metals like Mg, Cr, Fe, Co, Ni, Cu, Zn, Cd and Pb were predominant unlike Mn which shows a temporal variation. The strong association of trace metals with Fe and Mn hydroxides and oxides are prominent along the Cochin estuary. The anthropogenic inputs of industrial effluents mainly control the trace metals enrichment in the Cochin estuary.