Influence of land use on metal concentrations in playa sediments and amphibians in the Southern High Plains

The Southern High Plains (SHP) is a semi-arid region in which playa wetlands are the focal points of biodiversity. Playas are highly influenced by surrounding land use. Most of the SHP is in agricultural production (primarily cotton) with a history of arsenic-containing herbicide use. Metals influence reproduction and development in amphibians. We analyzed metal residues in playa sediment and whole body tissue of Spea spp. and Bufo cognatus metamorphs from two land uses: cropland and native grassland. Cd and Ni concentrations in B. cognatus tissues differed between land uses. Metal concentrations in Spea spp. tissues did not differ between land uses. Ba was higher in Spea spp. than B. cognatus collected from the same grassland playas, indicating differential habitat use. No correlations between sediment and tissue concentrations were found. Land use appeared to have little influence on metal concentrations and levels were below those known to cause effects in amphibians.     

Natural products: repellency and toxicity of wild tomato leaf extracts to the two-spotted spider mite, Tetranychus urticae Koch

The potential of using phytochemicals from leaves of wild tomato for controlling the two-spotted spider mite, Tetranychus urticae Koch, is explored in this study as a promising alternative to the use of synthetic pesticides. Wild tomato accessions of Lycopersicon hirsutum plants that are not consumed by humans were planted under greenhouse conditions for mass production of leaves. Crude extracts from leaves of three accessions of L. hirsutum, six accessions of L. hirsutum f. glabratum, and one accession each of L. pennellii and L. pimpinellifolium were prepared in chloroform, ethanol and hexane. Two spider mite bioassays, one a measure of antibiosis and the other a measure of repellency, were utilized to determine the acaricidal performance of the crude extracts. The bioassay for antibiosis was a 6-h no-choice test. The bioassay for repellency utilized a ring bioassay. Chloroform leaf extracts of L. hirsutum f. glabratum accessions (PI-251304, PI-134417, PI-134418, and PI-126449) exhibited greatest antibiotic activity on two-spotted spider mites; the hexane extracts exhibited greatest repellency. Extracts from PI-251304, PI-126449, PI-134417, and PI-134418 were especially lethal (chloroform) or repellent (hexane). We investigated differences in chemical composition of the crude leaf extracts that may explain the observed differences in mortality and repellency among the different accessions. Major chemical compounds (alpha -curcumene, alpha -zingiberene, trans-caryophyllene, 2-undecanone, and 2-tridecanone) known to have pesticidal efficacy were detected and quantified in the crude leaf extracts using a gas chromatograph (GC) equipped with a mass spectrometer (GC/MS). Lethality of extracts was mainly associated with the presence of high concentrations of 2-tridecanone; repellency of extracts was mainly associated with the presence of trans-caryophyllene. Leaf extracts of L. hirsutum f. glabratum accessions that contain significant quantities of 2-tridecanone and/or trans-caryophyllene could be useful for managing populations of spider mites, which could reduce reliance on synthetic pesticides.     

Integrated assessment modeling of atmospheric pollutants in the Southern Appalachian Mountains: Part II. Fine particulate matter and visibility

As part of the Southern Appalachian Mountains Initiative, a comprehensive air quality modeling system was developed to evaluate potential emission control strategies to reduce atmospheric pollutant levels at the Class I areas located in the Southern Appalachian Mountains. Six multiday episodes between 1991 and 1995 were simulated, and the skill of the modeling system was evaluated. Two papers comprise various parts of this study. Part I details the ozone model performance and the methodology that was used to scale discrete episodic pollutant levels to seasonal and annual averages. This paper (part II) addresses issues involved with modeling particulate matter (PM) and its relationship to visibility. For most of the episodes, the fractional error was approximately 50% or less for the major constituents of the fine PM (i.e., sulfate [SO4] and organics) in the region. The mean normalized errors and fractional errors are generally larger for the NO3 and soil components, but these components are relatively small. Variations in modeling bias with pollutant levels were also examined. The model showed a systematic overestimation for low levels and an underestimation for high levels for most PM species. For ammonium, the model showed better performance at lower SO4 concentrations when the measured SO4 was assumed to be completely neutralized (ammonium sulfate) and better performance at higher SO4 concentrations when the partially neutralized (ammonium bisulfate) assumption was made. The contributions of various components of PM to reductions in visibility were also calculated; SO4 was found to be the major contributor.     

The measurement of fine particulate semivolatile material in urban aerosols

Ammonium nitrate and semivolatile organic material (SVOM) are significant components of fine particles in urban atmospheres. These components, however, are not properly determined with methods such as the fine particulate matter (PM2.5) Federal Reference Method (FRM) or other single filter samplers because of significant losses of semivolatile material (SVM) from particles collected on the filter during sampling. The R&P tapered element oscillating microbalance (TEOM) monitor also does not measure SVM, because this method heats the sample to remove particle bound water, which also results in evaporation of SVM. Recent advances in monitoring techniques have resulted in samplers for both integrated and continuous measurement of total PM2.5, including the particle concentrator-Brigham Young University organic sampling system (PC-BOSS), the real-time total ambient mass sampler (RAMS), and the R&P filter dynamics measurement system (FDMS) TEOM monitor. Results obtained using these samplers have been compared with those obtained with either a PM2.5 FRM sampler or a TEOM monitor in studies conducted during the past five years. These studies have shown the following: (1) the PC-BOSS, RAMS, and FDMS TEOM are all comparable. Each instrument measures both the nonvolatile material and the SVM. (2) The SVM is not retained on the heated filter of a regular TEOM monitor and is not measured by this sampling technique. (3) Much of the SVM is also lost during sampling from single filter samplers such as the PM2.5 FRM sampler. (4) The amount of SVM lost from single filter samplers can vary from less than one-third of that lost from heated TEOM filters during cold winter conditions to essentially all during warm summer conditions. (5) SVOM can only be reliably collected using an appropriate denuder sampler. (6) A PM2.5 speciation sampler can be easily modified to a denuder sampler with filters that can be analyzed for semivolatile organic carbon (OC), nonvolatile OC, and elemental carbon using existing OC/elemental carbon analytical techniques. The research upon which these statements are based for various urban studies are summarized in this paper.     

The Southeastern Aerosol Research and Characterization Study, part 3: continuous measurements of fine particulate matter mass and composition

Deployment of continuous analyzers in the Southeastern Aerosol Research and Characterization Study (SEARCH) network began in 1998 and continues today as new technologies are developed. Measurement of fine particulate matter (PM2.5) mass is performed using a dried, 30 degrees C tapered element oscillating microbalance (TEOM). TEOM measurements are complemented by observations of light scattering by nephelometry. Measurements of major constituents include: (1) SO4(2-) via reduction to SO2; (2) NH4+ and NO3- via respective catalytic oxidation and reduction to NO, (3) black carbon (BC) by optical absorption, (4) total carbon by combustion to CO2, and (5) organic carbon by difference between the latter two measurements. Several illustrative examples of continuous data from the SEARCH network are presented. A distinctive composite annual average diurnal pattern is observed for PM2.5 mass, nitrate, and BC, likely indicating the influence of traffic-related emissions, growth, and break up of the boundary layer and formation of ammonium nitrate. Examination of PM2.5 components indicates the need to better understand the continuous composition of the unmeasured "other" category, because it contributes a significant fraction to total mass during periods of high PM2.5 loading. Selected episodes are presented to illustrate applications of SEARCH data. An SO2 conversion rate of 0.2%/hr is derived from an observation of a plume from a coal-fired power plant during early spring, and the importance of local, rural sources of NH3 to the formation of ammonium nitrate in particulate matter (PM) is demonstrated.     

Downstream and Coastal Impacts of Damming and Water Abstraction in Africa

Anthropogenic factors associated with damming and water abstraction, and the resultant environmental pressures, are reviewed in six African river catchments using records and forecasts of climatic, demographic, and land-use change. Changes in the states of the flow regime through catchment drainage systems to the coastal sea are considered in conjunction with climate change and other human-induced pressures. The impacts of these changes on downstream and coastal environments and their communities are described in past, present, and future perspectives. Linkages between the issues and the pressures of damming and water abstraction are appraised and scientific, policy, and management responses proposed aimed at remedying existing and perceived future negative impacts. The study proposes that there is a need to integrate catchment and coastal management to account for the whole water flow regime together with its human dimensions. Management priorities relating to the operation of existing damming and abstraction schemes and planning of future schemes include the following: consideration of ways in which water discharges could be adjusted to provide improvements in downstream and coastal environmental and socioeconomic conditions; addressing the problem of sediment trapping impacting on the sustainability of dam reservoirs; and assessment of downstream and coastal impacts of future schemes in the light of climate change forecasts.     

Remote Sensing and GIS Techniques for Selecting a Sustainable Scenario for Lake Koronia,Greece

During recent decades, Lake Koronia has undergone severe degradation as a result of human activities around the lake and throughout the basin. Surface and groundwater abstraction and pollution from agricultural, industrial, and municipal sources are the major sources of degradation. Planning a restoration project was hampered by lack of sufficient data, with gaps evident in both spatial and temporal dimensions. This study emphasized various remote sensing and geographic information system techniques, such as digital image processing and geographic overlay, to fill gaps using satellite imagery and other spatial environmental, hydrological, and hydrogeological data in the process of planning the restoration of Lake Koronia, following Ramsar guidelines. Current and historical remote sensing data were used to assess the current status and level of degradation, set constraints and define the ideotype for the restoration, and, finally, define and select the best restoration scenario.     

Controlled application rate of water treatment residual for agronomic and environmental benefits

Water treatment residuals (WTR) are useful soil amendments to control excessive soluble phosphorus (P) in soils, but indiscriminate additions can result in inadequate control or excessive immobilization of soluble P, leading to crop deficiencies. We evaluated the influence of application rates of an Al-WTR and various P-sources on plant yields, tissue P concentrations, and P uptake and attempted to identify a basis for determining WTR application rates. Bahiagrass (paspalum notatum Fluggae) was grown in a P-deficient soil amended with four P-sources at two application levels (N- and P-based rates) and three WTR rates (0, 10, and 25 g kg(-1) oven dry basis) in a glasshouse pot experiment. The glasshouse results were compared with data from a 2-yr field experiment with similar treatments that were surface applied to an established bahiagrass. Soil P storage capacity (SPSC) values increased with application rate of WTR, and the increase varied with sources of P applied. Soil soluble P concentrations increased as SPSC was reduced, and a change point was identified at 0 mg kg(-1) SPSC in the glasshouse and the field studies. A change point was identified in the bahiagrass yields at a tissue P concentration of 2.0 g kg(-1), corresponding to zero SPSC. Zero SPSC was shown to be an agronomic threshold above which yields and P concentrations of plants declined and below which there is little or no yield response to increased plant P concentrations. Applying P-sources at N-based rates, along with WTR sufficient to give SPSC value of 0 mg kg(-1) SPSC, enhanced the environmental benefits (reduced P loss potential) without negative agronomic impacts.     

Factors influencing the concentration of volatile fatty acids, ammonia, and other nutrients in stored liquid pig manure

In order to minimize odor and manage nutrients in liquid pig manure we need to be able to predict what operational practices most influence the concentrations of volatile fatty acids (VFAs), ammonium nitrogen (NH(4)(+)-N), and other nutrients present in the manure. To determine this, we collected manure from 15 pig operations in southwestern Ontario in the fall of 2001 and 2002 and spring of 2002 and 2003. The manure was stored in concrete tanks at all operations. Manure from finishing pigs had the highest concentration of VFAs, NH(4)(+)-N, and other nutrients, followed by manure from mixed operations, and then manure from sow operations. The average concentration of total VFAs and NH(4)(+)-N in finishing pig manure was 166 mM compared with 36 and 99 mM, respectively, in sow manure. Total N, P, and K were 2.3, 2.5, and 1.7 times greater, respectively, in finishing pig compared with sow manure. There was no seasonal or year to year variation in amount. The diet of the pigs, use of feed additives or antibiotics, location of tanks, and whether the tanks were covered or mixed were not significant factors contributing to the difference in manure chemistry. The main reason for the differences between the three types of manure was manure dilution. The average dry matter content of finishing pig manure was 4.5 times that of sow manure. This was due to larger density of pigs in finishing compared with sow operations, less manure storage capacity per pig for finishing compared with sow operations, and more wash water being used for sow operations.