Mercury source zone identification using soil vapor sampling and analysis

Development and demonstration of reliable measurement techniques that can detect and help quantify the nature and extent of elemental mercury (Hg(0)) in the subsurface are needed to reduce uncertainties in the decision-making process and increase the effectiveness of remedial actions. We conducted field tests at the Y-12 National Security Complex in Oak Ridge, Tennessee, USA, to determine if sampling and analysis of Hg(0) vapors in the shallow subsurface (<0.3 m depth) can be used to as an indicator of the location and extent of Hg(0) releases in the subsurface. We constructed a rigid polyvinyl chloride push probe assembly, which was driven into the ground. Soil gas samples were collected through a sealed inner tube of the assembly and were analyzed immediately in the field with a Lumex and/or Jerome Hg(0) analyzer. Time-series sampling showed that Hg vapor concentrations were fairly stable over time, suggesting that the vapor phase Hg(0) was not being depleted and that sampling results were not sensitive to the soil gas purge volume. Hg(0) vapor data collected at over 200 push probe locations at 3 different release sites correlated very well to areas of known Hg(0) contamination. Vertical profiling of Hg(0) vapor concentrations conducted at two locations provided information on the vertical distribution of Hg(0) contamination in the subsurface. We conclude from our studies that soil gas sampling and analysis can be conducted rapidly and inexpensively at large scales to help identify areas contaminated with Hg(0).     

Influence of planform geometry and momentum ratio on thermal mixing at a stream confluence with a concordant bed

The effects of planform geometry and momentum flux ratio on thermal mixing at a stream confluence with concordant bed morphology are investigated based on numerical simulations that can capture the dynamics of large-scale turbulence. In two simulations, the bathymetry and asymmetrical planform geometry are obtained from field experiments and the momentum flux ratio is set at values of one and four. These two conditions provide the basis for studying differences in thermal mixing processes at this confluence when the wake mode and the Kelvin–Helmholtz mode dominate the development of coherent structures within the mixing interface (MI). The effects of channel curvature and angle between the two incoming streams on thermal mixing processes are investigated based on simulations conducted with modified planform geometries. Two additional simulations are conducted for the case where the upstream channels are parallel but not aligned with the downstream channel and for the zero-curvature case where the upstream channels are parallel and aligned with the downstream channel. The simulations highlight the influence of large-scale coherent structures within the MI and of streamwise-oriented vortical (SOV) cells on thermal mixing processes within the confluence hydrodynamics zone. Simulation results demonstrate the critical role played by the SOV cells in promoting large-scale thermal mixing for cases when such cells form in the immediate vicinity of the MI and in modifying the shape of the thermal MI within cross sections of the downstream channel—predictions consistent with empirical measurements of thermal mixing at the confluence. The set of numerical simulations reveal that the degree of thermal mixing occurring within the confluence hydrodynamic zone varies dramatically with planform geometry and incoming flow conditions. In some cases thermal mixing at the downstream end of the confluence hydrodynamic zone is limited to the MI and its immediate vicinity, whereas in others substantial thermal mixing has occurred over most of the cross-sectional area of the flow. Overall, the simulations highlight the flow conditions and the controls of these conditions that influence mixing within the immediate vicinity of a confluence.     

A state of the science review of the potential health hazards associated with asbestos in shielded metal arc welding rods in the United States

Due to its unique chemical properties, chrysotile asbestos was historically incorporated into a wide variety of products, including the outer covering, or “flux” of certain classifications of general arc mild steel welding electrodes. The purpose of this analysis is to review the historical engineering, toxicology, regulatory, and epidemiology information relevant to asbestos in mild steel welding rods in order to assess whether mild steel welders are at increased risk of developing asbestos-related diseases as a result of welding rod use. We divided our analysis into four distinct time periods, based on what we perceived to be seminal events in welding technology or in the evolution of knowledge regarding asbestos and asbestos-related diseases. These time periods are as follows: late 1800s to 1929, 1930–1955, 1956–1970, and 1971–2006. We found that studies that attempted to measure airborne asbestos directly in welding rod fumes found no measurable fibers; this is likely due to the fact that the fibers degrade at high temperatures present in the welding arc. In addition, “worst-case” use simulation studies, specifically intended to generate airborne flux particles, reported that airborne asbestos concentrations were either undetectable or very low. The airborne concentrations generated were always below the current OSHA permissible exposure limit (0.1 f/cc TWA), and the lifetime doses associated with “worst-case” use were found to be far below the plausible thresholds for mesothelioma and lung cancer. The epidemiology of mild steel welders is difficult to interpret due to confounding exposures such as (1) possible exposure to nickel and hexavalent chromium in stainless steel welding fumes (lung cancer), (2) smoking (lung cancer), and (3) bystander exposure to amphibole asbestos (lung cancer and mesothelioma). None of the published welder studies controlled for all three factors, yet when any single source of bias was controlled for, the majority of the studies reported no significant risk in either asbestos-related disease. Furthermore, none of the investigators in any of the welder studies suggested that asbestos in welding rods might be a risk factor for lung cancer or mesothelioma, and there is not a single case report in the medical literature that attempts to link welding rod use to an asbestos-related disease. We conclude that the weight of evidence indicates that welders were not historically at risk of developing asbestos-related diseases as a result of welding rod use.     

Inorganic and organic contaminants in sediments from an urban playa and associated toxicity among Hyalella azteca

Playa wetlands are important components of the Southern High Plains (USA) landscape as they are the major aquatic surface feature. Chemical contaminants associated with playas have been documented, particularly for grassland and agricultural watersheds, but not for playas in urban settings. The objectives of this study were to determine concentrations of inorganic and organic contaminants in sediments from an urban playa within the I-20 Wildlife Preserve and Jenna Welch Nature Study Center in Midland, TX, and evaluate toxicity of these sediments to Hyalella azteca. Concentrations of most trace elements were below sediment quality guidelines with exceptions of lead, cadmium, and arsenic. Concentrations of organic contaminants, particularly PAHs, DDT, DDE, and malathion, were above sediment quality guidelines at various locations within the playa. Decreased survival was observed among H. azteca exposed to sediment from a single location when compared those exposed to reference sediments. This location also produced maximum observed concentrations for five of seven trace elements, potentially due to its location at the lowest elevation within the playa. This study documented concentrations of contaminants in sediments of an urban playa associated with past and present land uses in its urban setting, including those from automotive emissions and historical pesticide use.     

Multimodal signals increase active space of communication by wolf spiders in a complex litter environment

Multimodal signals may compensate for environmental constraints on communication, as signals in different modalities vary in efficacy. We examined the influence of complex microhabitats on transmission of vibratory and visual signals of courting male Schizocosa ocreata wolf spiders (Araneae: Lycosidae) with laser Doppler vibrometry (LDV) and behavioral observations in lab and field. We measured maximum potential detection distance of visual and vibratory signals by females in laboratory mesocosms, recorded vibration signal attenuation on different substrates, and estimated transmission distances for male vibration signals in the field. We also determined effective line-of-sight visual detection distances in the field with laser distance measures. Together, these data were used to estimate the potential and effective active space of multimodal signals. LDV measures show leaves are highly conductive substrates for wolf spider vibratory signals compared to others (soil, wood, rock). For both visual and vibratory modes, lab estimates of maximum potential distance for signal transmission and detection (behavior studies) exceeded estimates of effective active space (signal attenuation, “vanishing point,” and “line-of-sight” measures). Field estimates of transmission distance for signal modes overlap, such that in close range (<20 cm), vibratory signals are more likely to be detected, while farther away, visual signals are more likely to be seen. These findings thus support current hypotheses regarding how multimodal communication might extend the range of overall signal active space or compensate for environmental constraints.     

What does team–member exchange bring to the party? A meta‐analytic review of team and leader social exchange

Both leader–member exchange (LMX) and team–member exchange (TMX) measure the quality of reciprocal exchange among employees in the workplace. Although LMX focuses on supervisor–subordinate relationships while TMX examines the relationships among team members, both have theory‐based and empirically proven relations with workplace outcomes such as job performance, organizational commitment, job satisfaction, and turnover intentions. However, it is not yet known which has more of an impact on such workplace outcomes—specifically, it is not clear if an employee's time is best spent developing vertical relationships among supervisors and subordinates (LMX) or on the horizontal relationships among team members (TMX). Accordingly, this meta‐analysis explores the incremental validity and relative importance of these two social exchange‐based constructs. The theoretical logic underlying LMX and TMX is clarified, and the parameter estimates between LMX, TMX, and work outcomes are reported. Results demonstrate that TMX shows incremental validity above and beyond LMX for some outcomes (organizational commitment and job satisfaction), but not others (job performance and turnover intentions). Also, LMX shows greater relative importance across all four outcomes. In sum, the clarification of the theoretical and empirical landscape lays a foundation for recommendations for future research. Copyright © 2013 John Wiley & Sons, Ltd.     

The experience of waste minimization at a nitrocellulose manufacturing plant

This article describes how Taiwan nitrocellulose industrial company (TNC) applies the structured methodology developed by the U.S. environmental protection agency (USEPA) to reduce, recycle and recover the wastes generated at its Taoyuan plant. The company has generated significantly less amounts of wastes, improved the competitiveness in the international market and met more stringent environmental regulations since conducting the minimization program in the late 1980s. The experience gained at the Taoyuan plant is being applied to other plants in China and Philippines.     

Incorporating multidimensional behavior into a risk management tool for a critically endangered and migratory species

Conservation of migratory species exhibiting wide-ranging and multidimensional behaviors is challenged by management efforts that only utilize horizontal movements or produce static spatial–temporal products. For the deep-diving, critically endangered eastern Pacific leatherback turtle, tools that predict where turtles have high risks of fisheries interactions are urgently needed to prevent further population decline. We incorporated horizontal–vertical movement model results with spatial–temporal kernel density estimates and threat data (gear-specific fishing) to develop monthly maps of spatial risk. Specifically, we applied multistate hidden Markov models to a biotelemetry data set (n = 28 leatherback tracks, 2004–2007). Tracks with dive information were used to characterize turtle behavior as belonging to 1 of 3 states (transiting, residential with mixed diving, and residential with deep diving). Recent fishing effort data from Global Fishing Watch were integrated with predicted behaviors and monthly space-use estimates to create maps of relative risk of turtle–fisheries interactions. Drifting (pelagic) longline fishing gear had the highest average monthly fishing effort in the study region, and risk indices showed this gear to also have the greatest potential for high-risk interactions with turtles in a residential, deep-diving behavioral state. Monthly relative risk surfaces for all gears and behaviors were added to South Pacific TurtleWatch (SPTW) ( https://www.upwell.org/sptw ), a dynamic management tool for this leatherback population. These modifications will refine SPTW's capability to provide important predictions of potential high-risk bycatch areas for turtles undertaking specific behaviors. Our results demonstrate how multidimensional movement data, spatial–temporal density estimates, and threat data can be used to create a unique conservation tool. These methods serve as a framework for incorporating behavior into similar tools for other aquatic, aerial, and terrestrial taxa with multidimensional movement behaviors.     

A Combined MOIP–MCDA Approach to Building and Screening Atmospheric Pollution Control Strategies in Urban Regions

This article presents a methodological approach for the formulation of control strategies capable of reducing atmospheric pollution at the standards set by European legislation. The approach was implemented in the greater area of Thessaloniki and was part of a project aiming at the compliance with air quality standards in five major cities in Greece. The methodological approach comprises two stages: in the first stage, the availability of several measures contributing to a certain extent to reducing atmospheric pollution indicates a combinatorial problem and favors the use of Integer Programming. More specifically, Multiple Objective Integer Programming is used in order to generate alternative efficient combinations of the available policy measures on the basis of two conflicting objectives: public expenditure minimization and social acceptance maximization. In the second stage, these combinations of control measures (i.e., the control strategies) are then comparatively evaluated with respect to a wider set of criteria, using tools from Multiple Criteria Decision Analysis, namely, the well-known PROMETHEE method. The whole procedure is based on the active involvement of local and central authorities in order to incorporate their concerns and preferences, as well as to secure the adoption and implementation of the resulting solution.     

Spatial analysis of land use impact on ground water nitrate concentrations

In spatial analyses of causes or health effects of environmental pollutants, small units of analyses are usually preferred for internal environmental homogeneity reasons but can only be done when fine resolution data are available for most units. Objectives of this study were to determine which land use practices were spatially associated with ground water nitrate concentrations across Prince Edward Island (PEI), Canada, and which spatial aggregation is the preferred unit of analyses. Nitrate concentrations were determined for 4855 samples from private wells. Validated field-by-field land use data were available. Average nitrate concentration and percentage of area for the 14 major land use categories in PEI were determined for each of three spatial aggregations: watersheds based on topography and hydrology; freeform polygon boundaries based on similar neighboring nitrate concentrations; and 500-m buffer zones around each well. Results showed that the percentages of potato, grain, and hay coverage were positive predictors of ground water nitrate concentrations. Percentage of blueberry was a marginally significant negative predictor in the watershed and freeform polygon models, and percentage of residential coverage was a positive predictor in the freeform polygon and buffer zone models. Spatial autocorrelation was present in the freeform polygon and buffer zone models even after land use was taken into account. In conclusion, analyses based on watersheds produced the best predictive model with the percentages of land cover of potato, hay, and grain being significantly associated with ground water nitrate concentrations, and the percentages of blueberry, clear-cut woodland, and other agriculture being marginally significant.