Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Matrix Diffusion Modeling Applied to Long‐Term Pump‐and‐Treat Data: 2. Results From Three Sites

The data mining/groundwater modeling methodology developed in McDade et al. (2013) was performed to determine if matrix diffusion is a plausible explanation for the lower‐concentration but persistent chlorinated solvent plumes in the groundwater‐bearing units at three different pump‐and‐treat systems. Capture‐zone maps were evaluated, and eight wells were identified that did not draw water from any of the historical source areas but captured water from the sides of the plume. Two groundwater models were applied to study the persistence of the plumes in the absence of contributions from the historical source zones. In the wells modeled, the observed mass discharge generally decreased by about one order of magnitude or less over 4 to 10 years of pumping, and 1.8 to 17 pore volumes were extracted. In five of the eight wells, the matrix diffusion model fit the data much better than the advection dispersion retardation model, indicating that matrix diffusion better explains the persistent plume. In the three other wells, confounding factors, such as a changing capture zone over time (caused by changes in pumping rates in adjacent extraction wells); potential interference from a high‐concentration unremediated source zone; and limited number of pore volumes removed made it difficult to confirm that matrix diffusion processes were active in these areas. Overall, the results from the five wells indicate that mass discharge rates from the pumping wells will continue to show a characteristic “long tail'' of mass removal from zones affected by active matrix diffusion processes. Future site management activities should include matrix diffusion processes in the conceptual site models for these three sites. © 2013 Wiley Periodicals, Inc.     

Paving the way for the ISO 14006 ecodesign standard: an exploratory study in Spanish companies

A Spanish ecodesign standard (the UNE 150301) is being used as a basic reference point in paving the way for the future ISO 14006 ecodesign standard which may foreseeably be passed in 2011. This article aims to analyze the experience regarding adoption of the UNE 150301 in Spain.Following an analysis of the standard’s structure, its objectives and scope, its real implementation process is then analyzed based on an exploratory qualitative study carried out in four Spanish companies that have been pioneers in adopting this environmental standard. The conclusion is drawn in the article that in all the cases analyzed, the greatest source of impact occurs in the phase in which the product is used and is related to energy consumption. Companies appear to be satisfied with the adoption of this standard and, in particular, point out that they have managed to reduce the environmental impact of their products. However, they draw attention to the fact that, to deal with certain instances of impact that increases in cost entail, administrative bodies need to establish mandatory regulations, as environmentally-friendly companies would otherwise lose competitiveness.     

Experience,but not distance,influences the recruitment precision in the stingless bee <Emphasis Type="Italic">Scaptotrigona mexicana</Emphasis>

Recruitment precision, i.e. the proportion of recruits that reach an advertised food source, is a crucial adaptation of social bees to their environment. Studies with honeybees showed that recruitment precision is not a fixed feature, but it may be enhanced by factors like experience and distance. However, little is known regarding the recruitment precision of stingless bees. Hence, in this study, we examined the effects of experience and spatial distance on the precision of the food communication system of the stingless bee Scaptotrigona mexicana. We conducted the experiments by training bees to a three-dimensional artificial patch at several distances from the colony. We recorded the choices of individual recruited foragers, either being newcomers (foragers without experience with the advertised food source) or experienced (foragers that had previously visited the feeder). We found that the average precision of newcomers (95.6 ± 2.61%) was significantly higher than that of experienced bees (80.2 ± 1.12%). While this might seem counter-intuitive on first sight, this “loss” of precision can be explained by the tendency of experienced recruits to explore nearby areas to find new rewarding food sources after they had initially learned the exact location of the food source. Increasing the distance from the colony had no significant effect on the precision of the foraging bees. Thus, our data show that experience, but not the distance of the food source, affected the patch precision of S. mexicana foragers.     

Use of IPCC GHG key sources analysis to Mexico’s environmental policy

Intergovernmental Panel on Climate Change (IPCC) Tier 1 key sources level 1 assessment was applied to the 1994–1994 National Greenhouse Gases (GHG) emission inventory for Mexico in order to identify and analyze the key sources within it. Top key sources were from land use change and energy combustion contributing to about 60% of total national emissions. In addition, a Tier 1 trend assessment revealed some changes with respect to Tier 1 level assessment: Top key sources according to this analysis are waste disposal and delayed emissions from land clearing. Important insight for cost effective preventive mitigation actions can be extracted from this analysis. A comparison with other countries was carried out to find similarities in the GHG national emissions inventories related to common features on economic development.     

Differential timing and latitudinal variation in sex ratio of Aquatic Warblers during the autumn migration

Differential migration has been extensively reported in spring, but less so in autumn, particularly in relation to sex in monomorphic bird species. Here, we analysed the autumn passage of a monomorphic, globally threatened passerine, the Aquatic Warbler Acrocephalus paludicola throughout Western Europe, with regard to age and sex. We showed that, overall, adults migrated earlier than first-year birds, and males migrated earlier than females during the autumn migration. This may be caused by an overall social dominance of adults over immatures, and differentiated migration strategy of males and females. In addition, we found male-skewed sex proportions, with a tendency to an equalised ratio in more southern stopover sites. This may indicate a male bias in the global population or different migration strategies of the sexes. Differential migration may cause the age and sex classes to be exposed differently to various threats affecting demographic structure of the species.