Comparative Investigations on Optimum Polymerization Conditions for the Synthesis of a Sustainable Poly(Lactic Acid)

The development of synthetic biodegradable polymers using solvent free polymerization has a unique potential to be used as sustainable polymers in biomedical applications. The aim of this work was to synthesize and characterize a sustainable class of poly(lactic acid) (PLA) under different operating conditions via direct polycondensation of lactic acid (LA). Several parameters were tested including the absence of solvents and catalysts on the polymerization, in addition to polymerization temperature and time. Polymerization conditions were evaluated using response surface method (RSM) to optimize the impact of temperature, time, and catalyst. Results showed that molecular weight (M_w) of PLA increased with increasing polymerization time. Highest M_w of 28.4 kD with relatively a broad polydispersity 1.9 was achieved at polymerization temperature 170?°C at 24 h in the free solvent polymerization. This led to a relevant inherent viscosity of 0.37 dl/g. FTIR spectra exhibited a disappearance of the characteristic peak of the hydroxyl group in LA at 3482 cm^?1 by increasing the intensity of carbonyl group. The ¹H nuclear magnetic resonance (NMR) exhibited the main chain at 5.22 ppm and the signal of methyl proton at 1.61 ppm as well as a signal at 4.33 and 1.5 assigned to the methane proton next to the terminal hydroxyl group and carboxyl group respectively. Meanwhile, the PLA synthesized with a catalyst [Sn(Oct)₂] in a free solvent demonstrated comparatively high thermal transition properties of glass transition, melting, and crystallinity temperatures of 48, 106, and 158?°C, respectively. These results are of significant interest to further expand the use of PLA in biomedical applications.     

Atmospheric concentrations and phase partitioning of polybrominated diphenyl ethers (PBDEs) in Izmir, Turkey

Atmospheric concentrations of 7 PBDE congeners (BDE-28, -47, -99, -100, -153, -154 and -209) were determined at four sites (i.e. Suburban, Urban 1, Urban 2, Industrial) in Izmir, Turkey and their gas/particle partitioning was investigated. Total PBDE ( summation operator(7)PBDE) concentrations ranged between 11 (Urban 1) and 149pgm(-3) (Industrial) in summer, while in winter, they ranged from 6 (Suburban) to 81pgm(-3) (Industrial). BDE-209 was the dominant congener at all sites, followed by BDE-99 and -47. Investigation of source profiles indicated that the air samples were dominated by congeners of the penta and deca-technical BDE mixtures. The measured PBDE particle fractions were compared to the predictions of the K(OA) (octanol-air partition coefficient)-based equilibrium partitioning model and to the dynamic uptake model developed by others for passive samplers, which was adapted to model gas-particle partitioning in this study. For BDE-28, good agreement was observed between the experimental particle fractions and those predicted by the equilibrium partitioning model. However, this model overestimated the particle fractions of other congeners. The predictions of the dynamic uptake model supported the hypothesis that the unexpectedly high partitioning of BDEs (except BDE-28) to the gas-phase is due to their departure from equilibrium partitioning. When congeners with very large octanol-air partition coefficients (i.e. BDE-100, -99, -154, -153, and -209) are emitted from their sources in the gas-phase, they may remain in that phase for several months before reaching equilibrium with atmospheric particles. This may also have important implications for the transport of atmospheric PBDEs. For example, in addition to particle-bound transport, the gas-phase transport of highly brominated congeners (i.e. BDE-209) may also be important.     

Determination of Henry’s Law Constant of Formaldehyde as a Function of Temperature: Application to Air–Water Exchange in Tahtali Lake in Izmir, Turkey

The Henry's law constant (H) is an important parameter in predicting the transport, behavior and fate of organic compounds in environment. H is also required to model the air-water exchange of chemicals. Henry's law constant of formaldehyde (HCHO) was determined at six temperatures (50, 40, 30, 20, 10, and 5 degrees C) using a bubble-column technique. The apparent Henrys law constant (H*) values were strongly correlated to inverse of temperature (1/T, K) and the following relationship was obtained: In H* = (-1,641.3/T)-3.089. Seven concurrent ambient air and aqueous samples were also collected between October 11-17, 2005 at a sampling site located on the shoreline of Tahtali dam Lake in Izmir, Turkey to determine the magnitude and direction (deposition or gas-out) of HCHO flux. In all cases, the modeled gas-phase flux was positive (average +/- SD, 3,181 +/- 408 microg m(-2) day(-1)) indicating that atmospheric HCHO deposited to the Tahtali Lake.     

Using landsat data to determine land use/land cover changes in Samsun, Turkey

The rapid industrialization and urbanization of an area require quick preparation of actual land use/land cover (LU/LC) maps in order to detect and avoid overuse and damage of the landscape beyond sustainable development limits. Remote sensing technology fits well for long-term monitoring and assessment of such effects. The aim of this study was to analyze LU/LC changes between 1980 and 1999 in Samsun, Turkey, using satellite images. Three Landsat images from 1980, 1987 and 1999 were used to determine changes. A post classification technique was used based on a hybrid classification approach (unsupervised and supervised). Images were classified into six LU/LC types; urban, agriculture, dense forest, open forest-hazelnut, barren land and water area. It is found that significant changes in land cover occurred over the study period. The results showed an increase in urban, open forest/hazelnut, barren land and water area and a decrease in agriculture and dense forest in between 1980 and 1999. In this period, urban land increased from 0.77% to 2.47% of the total area, primarily due to conversions from agricultural land and forest to a lesser degree. While the area of dense forest decreased from 41.09% to 29.64% of the total area, the area of open forest and hazelnut increased from 6.73% to 11.88%.     

Characterization of Volatile Organic Compounds (VOCs) and Their Sources in the Air of Izmir, Turkey

Air samples were collected in Izmir, Turkey at two (suburban and urban) sites during three sampling programs in 2002 and 2004 to determine the ambient concentrations of several monoaromatic, chlorinated and oxygenated volatile organic compounds (VOCs). Samples were analyzed for 60 VOCs using gas chromatography/mass spectrometry and 28 compounds were detected in most samples. On the average, urban air VOC concentrations were about four times higher than those measured at the suburban site. Toluene (40.6%) was the most abundant compound in suburban site and was followed by benzene (7.4%), o,m-xylene (6.5%), and 1,2-dichloroethane (5.1%). In urban site, toluene (30.5%), p-xylene (14.9%), o,m-xylene (11.4%), and ethyl benzene (7.2%) were the dominating compounds in summer. In winter, toluene (31.1%), benzene (23.9%), 1,2-dichloroethane (9.5%), and o,m-xylene (8.2%) were the most abundant compounds. Receptor modeling (positive matrix factorization) has been performed to estimate the contribution of specific source types to ambient concentrations. Six source factors (gasoline vehicle exhaust, diesel vehicle exhaust+residential heating, paint production/application, degreasing, dry cleaning, and an undefined source) were extracted from the samples collected in the urban site. Three source factors (gasoline vehicle exhaust, diesel vehicle exhaust, and paint production/application) were identified for the suburban site.     

Ambient concentrations and source apportionment of PCBs and trace elements around an industrial area in Izmir, Turkey

Atmospheric concentrations of polychlorinated biphenyls (PCBs) and trace elements were measured at two sites (Industrial and Urban) located around the Aliaga industrial region, Izmir, Turkey. Average sigma 36PCB concentrations were 3136+/-824 and 1371+/-642 pg m(-3) for summer and winter periods, respectively in the Industrial site and they were 314+/-129 and 847+/-610 pg m(-3) in the Urban site. The elemental content showed that the PM(10) measured at the Industrial site was dominated by terrestrial elements and trace elements emitted by the iron-steel plants (Fe, Zn and Pb). The elemental profile at the Urban site was typical for Aegean Region that was dominated by terrestrial elements (Ca, Al, Mg) and sea salt (Na). Sources of particle-phase PCBs and trace elements were identified using factor analysis (FA) and were apportioned by chemical mass balance (CMB) model. FA suggested that the steel industry, fuel oil combustion, or the nearby vinyl chloride process in the petrochemical plant, and soil were significant PCB sources. CMB results showed that at the Industrial site, the contribution of steel industry and soil to particle-phase PCBs were 71% and 22%, respectively, while at the Urban site, the contributions were 33% and 49%, respectively. Steel industry was also the dominant contributor for trace elements around the site. Fugacity calculations in air and soil showed that the soil acts as a secondary source to the atmosphere for low molecular weight PCBs especially in summer and as a sink for the higher molecular weight ones.     

The influence of palm oil fuel ash heat treatment on the strength activity,porosity, and water absorption of cement mortar

Environmental Science and Pollution Research - The current study aims to explore the impact of palm oil fuel ash (POFA) heat treatment on the strength activity, porosity, and water absorption of...     

Life cycle environmental benefit and waste-to-energy potential of municipal solid waste management scenarios in Indonesia

Journal of Material Cycles and Waste Management - Appropriate municipal solid waste management transition should be promoted for developing Asian countries. Thus, we established a life-cycle...     

Isolation of bacterial strains from compost teas and screening of their PGPR properties on potato plants

Environmental Science and Pollution Research - The beneficial effect of compost and compost tea on plant growth and protection is mainly associated with the microbial diversity and the presence of...     

Analytical solutions of contaminant transport in homogeneous and isotropic aquifer in three-dimensional groundwater flow

Environmental Science and Pollution Research - Modeling three-dimensional contaminant transport released from arbitrary shape source geometries is useful in hydrological and environmental sciences....