Production of Fe2O3 from FeSO4·xH2O formed in galvanizing works

FeSO₄·xH₂O is generated in large amounts in galvanizing workshops. It can be reutilized by conversion to Fe₂O₃. In this study, the recovery of Fe₂O₃ from FeSO₄·xH₂O formed in the galvanizing process has been examined. The experimental work was carried out at various temperatures and times in the oxidizing medium. The reaction temperatures and times were selected as 450, 500, 550, 600, 650, 700, 800 and 900°C, and 15, 30, 45, 60, 90 and 120 minutes, respectively. In order to determine the amount of Fe₂O₃, a titrimetric method was applied. The reaction products were characterized by means of IR and XRD techniques.The extent of conversion is low at temperatures below 650°C. Almost all of the iron (II) sulfate in the original sample was converted to iron(III) oxide at 650°C (120 min), 700°C (90 min), 800°C (60 min) and 900°C (45 min).     

Uptake of Ni2+ and rhodamine B by nano-hydroxyapatite/alginate composite beads: batch and continuous-flow systems

Alginate encapsulated nano-hydroxyapatite beads were synthesized and characterized by Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface analysis, and X-ray diffraction. Their adsorptive potential for Ni²⁺ and rhodamine B was explored in batch mode and by fixed-bed column passage. In the batch system, maximum uptake capacity for Ni²⁺ was 360 mg g^?1 and 480 mg g^?1 for rhodamine B. In the presence of humic acid, sorption was enhanced. For the continuous-flow system, adsorption was effective at low flow rate. For both pollutants, mass transport resistance increased during adsorption. The overall rates of rhodamine B and Ni²⁺ uptake were found to be controlled by external mass transfer.     

Determination of heavy metals in lower Sakarya river sediments using a BCR-sequential extraction procedure

A BCR-sequential extraction procedure for the determination of extractable heavy metals was applied to sediments of various rivers and lakes. There are many rivers basins in Turkey. Sakarya River Basin is one of the most important basins, which consists of three parts: Upper, Middle and Lower Sakarya River Basins. In this study, the Lower Sakarya River was selected as the study area for sediments. The samples were collected monthly from 10 pre-determined stations through the river for 10 months time and analysed for the distribution of Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn elements. The determination of extractable heavy metals in sediments was carried out by using Flame Atomic Absorption Spectrometer. The validation of the results was performed by the analysis of a BCR 701 standard reference material.     

Protective effect of gamma-oryzanol against manganese-induced toxicity in Drosophila melanogaster

Environmental Science and Pollution Research - Manganese (Mn) is an essential element that, in excess, seems to be involved in the development of different neurodegenerative conditions....     

Melatonin exerts a neuroprotective effect against γ-radiation-induced brain injury in the rat through the modulation of neurotransmitters,inflammatory cytokines,oxidative stress,and apoptosis

Environmental Science and Pollution Research - The current study aimed to investigate the ameliorative effect of melatonin (MLT) against brain injury in rats undergoing whole-body exposure to...     

Influence of pyrolysis temperature on production and nutrient properties of wastewater sludge biochar

The important challenge for effective management of wastewater sludge materials in an environmentally and economically acceptable way can be addressed through pyrolytic conversion of the sludge to biochar and agricultural applications of the biochar. The aim of this work is to investigate the influence of pyrolysis temperature on production of wastewater sludge biochar and evaluate the properties required for agronomic applications. Wastewater sludge collected from an urban wastewater treatment plant was pyrolysed in a laboratory scale reactor. It was found that by increasing the pyrolysis temperature (over the range from 300 °C to 700 °C) the yield of biochar decreased. Biochar produced at low temperature was acidic whereas at high temperature it was alkaline in nature. The concentration of nitrogen was found to decrease while micronutrients increased with increasing temperature. Concentrations of trace metals present in wastewater sludge varied with temperature and were found to primarily enriched in the biochar.     

Anthropogenic climate change drives melting of glaciers in the Himalaya

Environmental Science and Pollution Research - The Himalayan glaciers provide water to a large population in south Asia for a variety of purposes and ecosystem services. As a result, regional...     

Forecasting carbon emissions due to electricity power generation in Bahrain

Environmental Science and Pollution Research - Global warming and climate change have become one of the most embarrassing and explosive problems/challenges all over the world, especially in...     

Recovery of valuable metals from WPCB fines by centrifugal gravity separation and froth flotation

Journal of Material Cycles and Waste Management - This paper reports physical and physicochemical routes for the recycling of gold, silver, and copper from waste printed circuit boards (WPCBs). The...