The distribution of phthalate esters in indoor dust of Palermo (Italy)

In this work, phthalic acid esters (PAEs): dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, and di-n-octyl phthalate in indoor dust (used as passive sampler) were investigated. The settled dust samples were collected from thirteen indoor environments from Palermo city. A fast and simple method using Soxhlet and GC–MS analysis has been optimized to identify and quantify the phthalates. Total phthalates concentrations in indoor dusts ranged from 269 to 4,831 mg/kg d.w. (d.w. = dry weight). The data show a linear correlation between total PAEs concentration and a single compound content, with the exclusion of the two most volatile components (DMP and DEP) that are present in appreciable amounts only in two samples. These results suggest that most of the PAEs identified in the samples of settled dust originate from the same type of material. This evidence indicates that, in a specific indoor environment, generally is not present only one compound but a mixture having over time comparable percentages of PAEs. Consequently, for routine analyses of a specific indoor environment, only a smaller number of compounds could be determined to value the contamination of that environment. We also note differences in phthalate concentrations between buildings from different construction periods; the total concentration of PAEs was higher in ancient homes compared to those constructed later. This is due to a trend to reduce or remove certain hazardous compounds from building materials and consumer goods. A linear correlation between total PAEs concentration and age of the building was observed (R = 0.71).     

An object-based image analysis approach for aquaculture ponds precise mapping and monitoring: a case study of Tam Giang-Cau Hai Lagoon, Vietnam

Monitoring and mapping shrimp farms, including their impact on land cover and land use, is critical to the sustainable management and planning of coastal zones. In this work, a methodology was proposed to set up a cost-effective and reproducible procedure that made use of satellite remote sensing, object-based classification approach, and open-source software for mapping aquaculture areas with high planimetric and thematic accuracy between 2005 and 2008. The analysis focused on two characteristic areas of interest of the Tam Giang-Cau Hai Lagoon (in central Vietnam), which have similar farming systems to other coastal aquaculture worldwide: the first was primarily characterised by locally referred “low tide” shrimp ponds, which are partially submerged areas; the second by earthed shrimp ponds, locally referred to as “high tide” ponds, which are non-submerged areas on the lagoon coast. The approach was based on the region-growing segmentation of high- and very high-resolution panchromatic images, SPOT5 and Worldview-1, and the unsupervised clustering classifier ISOSEG embedded on SPRING non-commercial software. The results, the accuracy of which was tested with a field-based aquaculture inventory, showed that in favourable situations (high tide shrimp ponds), the classification results provided high rates of accuracy (>95 %) through a fully automatic object-based classification. In unfavourable situations (low tide shrimp ponds), the performance degraded due to the low contrast between the water and the pond embankments. In these situations, the automatic results were improved by manual delineation of the embankments. Worldview-1 necessarily showed better thematic accuracy, and precise maps have been realised at a scale of up to 1:2,000. However, SPOT5 provided comparable results in terms of number of correctly classified ponds, but less accurate results in terms of the precision of mapped features. The procedure also demonstrated high degrees of reproducibility because it was applied to images with different spatial resolutions in an area that, during the investigated period, did not experience significant land cover changes.     

Distribution of Cd and As in organs and tissues of four marine mammal species stranded along the Italian coasts

Concentrations of Cd and As were determined in organs and tissues (muscle, heart, kidney, lung and liver) of four cetacean species (Stenella coeruleoalba, Truncatus truncatus, Grampus griseus and Ziphius cavirostris) stranded along the Italian coasts during the period 2000-2009. Significant differences were found between Cd concentrations in the different analysed tissues. Particularly, the kidney shows the highest concentrations of Cd in all analysed specimens, followed by the liver. No systematic or statistically significant difference in As concentrations was found in the analysed tissues. Considerable differences of Cd and As values in samples from different geographical areas (Sicily Channel, Adriatic Sea and Tyrrhenian Sea) were found, with the highest values measured in samples from the Sicily Channel. This basically suggests that anthropogenic and natural sources significantly affect Cd and As content in cetaceans.     

Characterisation of urban inhalation exposures to benzene,formaldehyde and acetaldehyde in the European Union

BACKGROUND, AIM AND SCOPE: All across Europe, people live and work in indoor environments. On average, people spend around 90% of their time indoors (homes, workplaces, cars and public transport means, etc.) and are exposed to a complex mixture of pollutants at concentration levels that are often several times higher than outdoors. These pollutants are emitted by different sources indoors and outdoors and include volatile organic compounds (VOCs), carbonyls (aldehydes and ketones) and other chemical substances often adsorbed on particles. Moreover, legal obligations opposed by legislations, such as the European Union's General Product Safety Directive (GPSD) and Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH), increasingly require detailed understanding of where and how chemical substances are used throughout their life-cycle and require better characterisation of their emissions and exposure. This information is essential to be able to control emissions from sources aiming at a reduction of adverse health effects. Scientifically sound human risk assessment procedures based on qualitative and quantitative human exposure information allows a better characterisation of population exposures to chemical substances. In this context, the current paper compares inhalation exposures to three health-based EU priority substances, i.e. benzene, formaldehyde and acetaldehyde. MATERIALS AND METHODS: Distributions of urban population inhalation exposures, indoor and outdoor concentrations were created on the basis of measured AIRMEX data in 12 European cities and compared to results from existing European population exposure studies published within the scientific literature. By pooling all EU city personal exposure, indoor and outdoor concentration means, representative EU city cumulative frequency distributions were created. Population exposures were modelled with a microenvironment model using the time spent and concentrations in four microenvironments, i.e. indoors at home and at work, outdoors at work and in transit, as input parameters. Pooled EU city inhalation exposures were compared to modelled population exposures. The contributions of these microenvironments to the total daily inhalation exposure of formaldehyde, benzene and acetaldehyde were estimated. Inhalation exposures were compared to the EU annual ambient benzene air quality guideline (5 microg/m3-to be met by 2010) and the recommended (based on the INDEX project) 30-min average formaldehyde limit value (30 microg/m3). RESULTS: Indoor inhalation exposure contributions are much higher compared to the outdoor or in-transit microenvironment contributions, accounting for almost 99% in the case of formaldehyde. The highest in-transit exposure contribution was found for benzene; 29.4% of the total inhalation exposure contribution. Comparing the pooled AIRMEX EU city inhalation exposures with the modelled exposures, benzene, formaldehyde and acetaldehyde exposures are 5.1, 17.3 and 11.8 microg/m3 vs. 5.1, 20.1 and 10.2 microg/m3, respectively. Together with the fact that a dominating fraction of time is spent indoors (>90%), the total inhalation exposure is mostly driven by the time spent indoors. DISCUSSION: The approach used in this paper faced three challenges concerning exposure and time-activity data, comparability and scarce or missing in-transit data inducing careful interpretation of the results. The results obtained by AIRMEX underline that many European urban populations are still exposed to elevated levels of benzene and formaldehyde in the inhaled air. It is still likely that the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended formaldehyde 30-min average limit value of 30 microg/m3 are exceeded by a substantial part of populations living in urban areas. Considering multimedia and multi-pathway exposure to acetaldehyde, the biggest exposure contribution was found to be related to dietary behaviour rather than to inhalation. CONCLUSIONS: In the present study, inhalation exposures of urban populations were assessed on the basis of novel and existing exposure data. The indoor residential microenvironment contributed most to the total daily urban population inhalation exposure. The results presented in this paper suggest that a significant part of the populations living in European cities exceed the annual ambient benzene air quality guideline of 5 microg/m3 in the EU and recommended (INDEX project) formaldehyde 30-min average limit value of 30 microg/m3. RECOMMENDATIONS AND PERSPECTIVES: To reduce exposures and consequent health effects, adequate measures must be taken to diminish emissions from sources such as materials and products that especially emit benzene and formaldehyde in indoor air. In parallel, measures can be taken aiming at reducing the outdoor pollution contribution indoors. Besides emission reduction, mechanisms to effectively monitor and manage the indoor air quality should be established. These mechanisms could be developed by setting up appropriate EU indoor air guidelines.     

Ability of chestnut oak to tolerate acorn pruning by rodents

Acorns of many white oak species germinate soon after autumn seed fall, a characteristic widely interpreted as a general adaptation to escape predation by small rodents. However, the mechanism by which early, rapid germination allows escape and/or tolerance of seed damage remains unclear. Here we reported how specific germination traits of chestnut oak (Quercus montana) acorns, and those of other white oak species, allow successful escape from acorn pruning by rodents. During germination, chestnut oak acorns develop elongated cotyledonary petioles, which extend beyond the distal end of the acorn (1–2 cm) to the point at which the epicotyl and radicle diverge. However, granivorous rodents often prune the taproots above or below the plumule when eating or caching these germinated acorns in autumn. Hence, we hypothesized elongation of cotyledonary petioles allows chestnut oaks to escape acorn pruning by rodents. We simulated pruning by rodents by cutting the taproot at different stages of germination (radicle length) to evaluate the regeneration capacity of four resulting seedling remnants following taproot pruning: acorns with the plumule (remnant I), acorns without the plumule (remnant II), and pruned taproots with (remnant III) or without the plumule (remnant IV). Our results showed that remnant I germinated into seedlings regardless of the length of the taproot previously pruned and removed. Remnant III successfully germinated and survived provided that taproots were ≥6 cm in length, whereas remnant IV was unable to produce seedlings. Remnant II only developed adventitious roots near the severed ends of the cotyledonary petioles. Field experiments also showed that pruned taproots with the plumule successfully regenerated into seedlings. We suggest that the elongated cotyledonary petioles, typical of most white oak species in North America, represent a key adaptation that allows frequent escape from rodent damage and predation. The ability of pruned taproots to produce seedlings suggests a far greater resilience of white oaks to seed predation than previously anticipated.     

A new route for the chemical valorisation of lactose

A totally protected di-O-benzyl derivative of triacetonlactose dimethyl acetal was transformed into a 4'-hexeno disaccharide by elimination of acetone with t-BuOK in DMF and subsequently in 5'-C-methoxy derivative by oxidation with MCPBA in methanol as a solvent. The hydrolysis of this latter compound affords 2,6-di-O-benzyl-L-arabino-aldohexosos-5-ulose, which by intramolecular aldol condensation with DBU gives an inosose that was stereoselectively reduced to epi-inositol. Therefore our synthetic strategy offers a new and simple method to transform lactose into carbocyclic monosaccharide analogues.     

Tween 20 and Its Major Free Fatty Acids as Carbon Substrates for the Production of Polyhydroxyalkanoates in Pseudomonas aeruginosa ATCC 27853

The ability of Pseudomonas aeruginosa ATCC 27853 to grow and synthesize polyhydroxyalkanoates (PHAs) using Tween 20 as the sole carbon source was investigated. Tween 20 could support cell growth and PHA production. The polymer produced from Tween 20 was compared with those produced from its major free fatty acids components: lauric (C₁₂), myristic (C₁₄), and palmitic (C₁₆) acids. Gas-chromatographic analysis of methanolyzed samples and ¹³C-Nuclear Magnetic Resonance (NMR) showed that the PHAs obtained are composed of even carbon atoms 3-hydroxyalkanoates ranging from C₆ to C₁₄, with C₈ and C₁₀ as the predominant components. The nature of the carbon sources used had little influence on the composition, but was found to be important in determining the average molecular weight, shorter chain fatty acids yielding higher molecular weight products. Fast Atom Bombardment-Mass Spectrometry (FAB-MS) of partially pyrolyzed samples, coupled to statistical analysis, showed that these PHAs are random copolymers.     

Annoyance due to aircraft noise has increased over the years—Results of the HYENA study

In the HYENA study (HYpertension and Exposure to Noise near Airports) noise annoyances due to aircraft and road traffic noise were assessed in subjects that lived in the vicinity of 6 major European airports using the 11-point ICBEN scale (International Commission on Biological Effects of Noise). A distinction was made between the annoyance during the day and during the night. L_den and L_night were considered as indicators of noise exposure. Pooled data analyses showed clear exposure–response relationships between the noise level and the noise annoyance for both exposures. The exposure–response curves for road noise were congruent with the EU standard curves used for predicting the number of highly noise annoyed subjects in European communities. Annoyance ratings due to aircraft noise, however, were higher than predicted by the EU standard curves. The data supports other findings suggesting that the people's attitude towards aircraft noise has changed over the years, and that the EU standard curve for aircraft noise should be modified.