Accelerated carbonation of wood combustion ash for CO<Subscript>2</Subscript> removal from gaseous streams and storage in solid form

In this work, ash generated by the combustion of wood in a central heating plant was used to remove and permanently store by accelerated carbonation CO₂ contained in a gas mixture simulating biogas. The process was studied as an alternative treatment to the ones currently available on the market for biogas upgrading. The process was investigated at laboratory scale by setting up a facility for directly contacting the wood ash and the synthetic biogas in a fixed bed reactor. The process was able to completely remove CO₂ during its initial phase. After about 30 h, CO₂ started to appear again in the outlet stream and its concentration rapidly increased. The specific CO₂ uptake achieved in solid carbonate form was of about 200 g/kg of dry wood ash. This value is an order of magnitude higher than the ones found for waste incineration bottom ash carrying out similar experiments. The difference was ascribed to the physicochemical properties of the ash, characterized by a fine particle size (d₅₀ <?0.2 mm) and high content of reactive phases with CO₂ (e.g., Ca hydroxides). The leaching behavior of the wood ash was examined before and after the accelerated carbonation process showing that the release of several elements was lower after the treatment; Ba leaching in particular decreased by over two orders of magnitude. However, the release of the critical elements for the management of this type of residues (especially Cr and sulfates) appeared not to be significantly affected, while V leaching increased.     

Combining Environmental Factors and Agriculturalists’ Observations of Environmental Changes in the Traditional Terrace System of the Amalfi Coast (Southern Italy)

Terraces are traditional engineered ecosystems that affect the hydro-geological equilibrium, slope stability, and local communities. The aims of this paper are (i) identifying environmental factors that affect terrace stability in the Amalfi Coast, (ii) defining agriculturalists’ observations on environmental changes within that system and (iii) exploring potentiality of these observations to better define conservation strategies. All available data on physical and ecological factors recognized to affect the terrace system were collected and analyzed. Interviews were conducted with agriculturalists to obtain long-term observations on environmental factors that interact with this system. Landslides are more frequent where rainfall is high and during winter. Fires have an uneven annual distribution, with higher frequency during summers. Agriculturalists detailed complex interactions among environmental factors, economic elements, and terraces. These observations represent a valuable resource for defining causes and effects of abandonment and for better addressing conservation strategies.

Electronic supplementary material

The online version of this article (doi:10.1007/s13280-013-0433-3) contains supplementary material, which is available to authorized users.     

Mechanisms contributing to the thermal analysis of waste incineration bottom ash and quantification of different carbon species

The focus of this study was to identify the main compounds affecting the weight changes of bottom ash (BA) in conventional loss on ignition (LOI) tests and to obtain a better understanding of the individual processes in heterogeneous (waste) materials such as BA. Evaluations were performed on BA samples from a refuse derived fuel incineration (RDF-I) plant and a hospital waste incineration (HW-I) plant using thermogravimetric analysis and subsequent mass spectrometry (TG–MS) analysis of the gaseous thermal decomposition products. Results of TG–MS analysis on RDF-I BA indicated that the LOI measured at 550 °C was due to moisture evaporation and dehydration of Ca(OH)₂ and hydrocalumite. Results for the HW-I BA showed that LOI at 550 °C was predominantly related to the elemental carbon (EC) content of the sample. Decomposition of CaCO₃ around 700 °C was identified in both materials. In addition, we have identified reaction mechanisms that underestimate the EC and overestimate the CaCO₃ contents of the HW-I BA during TG–MS analyses. These types of artefacts are expected to occur also when conventional LOI methods are adopted, in particular for materials that contain CaO/Ca(OH)₂ in combination with EC and/or organic carbon, such as e.g. municipal solid waste incineration (MSWI) bottom and fly ashes. We suggest that the same mechanisms that we have found (i.e. in situ carbonation) can also occur during combustion of the waste in the incinerator (between 450 and 650 °C) demonstrating that the presence of carbonate in bottom ash is not necessarily indicative for weathering. These results may also give direction to further optimization of waste incineration technologies with regard to stimulating in situ carbonation during incineration and subsequent potential improvement of the leaching behavior of bottom ash.     

Organic persistent toxic substances in soils, waters and sediments along an altitudinal gradient at Mt. Sagarmatha, Himalayas, Nepal

Persistent Organic Pollutants (POPs) and Polycyclic Aromatic Hydrocarbons (PAHs) are important classes of compounds of serious environmental concern. These compounds were measured in waters, sediments and soils from several high altitude sites in the Sagarmatha National Park (Nepal) and included in the Himalayan ridge.In water samples, low-level substituted PCBs and PBDEs, along with more volatile PAHs, were the most common contaminants. In sediment and soil samples, the PCB profile was mainly composed of medium-level chlorinated congeners and significantly correlated with altitude. The PAH profile for water and soil samples showed the main contribution of pyrogenic PAHs due to emissions of solid combustion, whereas the profile for sediments indicated the main contribution of pyrogenic PAHs from gasoline emissions. The PAH levels measured in Himalayan samples must be considered as low to medium contaminated, whereas the regarded Himalayan stations can be considered undisturbed remote areas concerning PCB, PBDE and OC compounds.     

A multi-criteria framework to assess the sustainability of renewable energy development in the Alps

A multi-criteria analysis (MCA) was implemented to assess the best solutions for enhancing the production of renewable energy in the Alps. A set of criteria were selected based on the impacts of four renewable energy sources (forest biomass, hydropower, ground solar photovoltaic and wind power) on the three spheres of sustainability (environmental, social and economic). Three different scenarios are presented, each with a different set of weights for the criteria: the first scenario considers equally all three aspects of sustainability; the second scenario foresees an environmentally-oriented perspective, while the third scenario is more focused on the socio-economic aspects related to the development of renewable energy. Results show that forest biomass and hydropower seem to be the most viable solutions for enhancing the share of renewable energy in the Alps. Ground solar photovoltaic and wind power, on the other hand, seem to be less attractive alternatives due to their high impacts on land use.     

Evaluation of genotoxicity and coumarin production in conventional and organic cultivation systems of Mikania glomerata Spreng

Abstract

Mikania glomerata Sprengel, popularly known as “guaco,” is used in Brazilian folk medicine for several inflammatory and allergic conditions. Besides, the popular use “guaco” is indicated by the Brazilian Ministry of Health as a safe and effective herbal medicine. The biological activity of M. glomerata extracts is due to the presence of the coumarins, a large family of phenolic substances found in plants and is made of fused benzene and α-pyrone rings. Considering that there are few data on the biological effects of the extracts of M. glomerata, mainly in genetic level, this work aims to evaluate, in vitro, the genotoxicity and coumarin production in M. glomerata in conventional and organic growing. The data showed that the organic culture system showed double the concentration of coumarin being significantly more productive than the conventional system. Besides, the results of comet assay suggest that extracts of M. glomerata cultivated in a conventional system was genotoxic, increased DNA damage levels while the organic extracts seem to have antigenotoxic effect possibly due to the concentration of coumarins. Additional biochemical investigations are necessary to elucidate the mechanisms of action of M. glomerata extracts, which were found to have a role in protection against DNA damage.     

The hydraulic separator Multidune: preliminary tests on fluid-dynamic features and plastic separation feasibility

Recycling of plastic materials is a rapidly developing discipline because of environmental awareness, the need to conserve materials and energy, and the growing demand to increase the production economy. The main problem in plastics recovery and recycling is related to the variety of plastic wastes, even if selective collection occurs. Therefore, plastic materials can be recycled either as mixtures or as single types, separating the different typologies by their physical (size, specific mass, etc.) and/or chemical properties. However, separation of plastics in single typologies by traditional processes and devices is difficult due to their typical low variability in properties. This paper presents a new research development for recycling industry: the Multidune separator. This is a device constructed from a sequence of parallel semi-cylindrical tubes of transparent plastic welded together in a plane. The lower half is shifted laterally and then fixed relative to the upper half. Flow is then induced in the lateral direction normal to the axis of the tubes, creating a main flow channel and two recirculation zones. This apparatus creates a differential transport of particles of low specific mass, near to 1g/cm(3), allowing their separation. The flow field in the Multidune separator is studied via Particle Tracking Velocimetry (PTV). Eulerian analysis of the data is performed to gather information about the fluid-dynamics features established by different hydraulic heads at the inlet of the Multidune. Preliminary tests on monomaterial samples have been performed, varying several operative parameters to determine the best set of values. Therefore, separation tests have been executed on composite samples, obtaining satisfactory results in terms of plastic separation feasibility.