A Risk-Based Predictive Tool to Prevent Accidental Introductions of Nonindigenous Marine Species

Preventing the introduction of nonindigenous species (NIS) is the most efficient way to avoid the costs and impacts of biological invasions. The transport of fouling species on ship hulls is an important vector for the introduction of marine NIS. We use quantitative risk screening techniques to develop a predictive tool of the abundance and variety of organisms being transported by ocean-going yachts. We developed and calibrated an ordinal rank scale of the abundance of fouling assemblages on the hulls of international yacht hulls arriving in New Zealand. Fouling ranks were allocated to 783 international yachts that arrived in New Zealand between 2002 and 2004. Classification tree analysis was used to identify relationships between the fouling ranks and predictor variables that described the maintenance and travel history of the yachts. The fouling ranks provided reliable indications of the actual abundance and variety of fouling assemblages on the yachts and identified most (60%) yachts that had fouling on their hulls. However, classification tree models explained comparatively little of the variation in the distribution of fouling ranks (22.1%), had high misclassification rates (∼43%), and low predictive power. In agreement with other studies, the best model selected the age of the toxic antifouling paint on yacht hulls as the principal risk factor for hull fouling. Our study shows that the transport probability of fouling organisms is the result of a complex suite of interacting factors and that large sample sizes will be needed for calibration of robust risk models.     

Fertility signaling—the proximate mechanism of worker policing in a clonal ant

In eusocial insects, the ability to regulate reproduction relies on cues that signal the presence of fertile individuals. We investigated the variation of cuticular hydrocarbons (CHCs) with reproductive status in Platythyrea punctata, an ant, in which all workers are capable of producing daughters from unfertilized eggs (thelytoky). Who reproduces is determined through dominance and worker policing. New reproductives, which developed their ovaries after separation from an old reproductive for a short period of time, were attacked by nonreproductives upon reintroduction into their colony. In contrast, aggression against new reproductives with fully developed ovaries, which had been separated over a longer period, was initiated by fights between old and new reproductives. CHC profiles varied with ovarian development. New reproductives were only attacked when they expressed a CHC profile similar to old reproductives, but not when it was similar to that of nonreproductives. CHCs appear to signal the fertility of individuals and induce policing behavior towards surplus reproductive workers.     

Planning for ex situ conservation in the face of uncertainty

Ex situ conservation strategies for threatened species often require long‐term commitment and financial investment to achieve management objectives. We present a framework that considers the decision to adopt ex situ management for a target species as the end point of several linked decisions. We used a decision tree to intuitively represent the logical sequence of decision making. The first decision is to identify the specific management actions most likely to achieve the fundamental objectives of the recovery plan, with or without the use of ex‐situ populations. Once this decision has been made, one decides whether to establish an ex situ population, accounting for the probability of success in the initial phase of the recovery plan, for example, the probability of successful breeding in captivity. Approaching these decisions in the reverse order (attempting to establish an ex situ population before its purpose is clearly defined) can lead to a poor allocation of resources, because it may restrict the range of available decisions in the second stage. We applied our decision framework to the recovery program for the threatened spotted tree frog (Litoria spenceri) of southeastern Australia. Across a range of possible management actions, only those including ex situ management were expected to provide >50% probability of the species’ persistence, but these actions cost more than use of in situ alternatives only. The expected benefits of ex situ actions were predicted to be offset by additional uncertainty and stochasticity associated with establishing and maintaining ex situ populations. Naïvely implementing ex situ conservation strategies can lead to inefficient management. Our framework may help managers explicitly evaluate objectives, management options, and the probability of success prior to establishing a captive colony of any given species.     

Optimisation of zeolite LTA synthesis from alum sludge and the influence of the sludge source

Generation of alum sludge (AS) at drinking water treatment plants represents an environmental liability and adds to the cost of water purification. Consequently, this study explored the feasibility of using low and high carbon containing alum sludge from two water treatment plants to synthesize zeolite LTA. The hypothesis was that zeolite LTA synthesis was dependant upon alum sludge source and that a range of strategies may be required to optimize zeolite crystallinity. Zeolite characteristics such as morphology, phase composition, crystallinity, and particle size distribution were recorded. “One pot” hydrothermal synthesis of precursor gel with molar composition 4.2Na₂O:Al₂O₃:1.2SiO₂:168H₂O at 80°C for 3 hr resulted in 25 and 46 wt.% zeolite LTA from high and low carbonaceous sludge, respectively. Prior to hydrothermal reaction stage it was discovered that ageing of the gel, addition of zeolite LTA seeds, ultrasonic treatment and calcination all promoted zeolite LTA formation. Calcination of the alum sludge at 700°C for 2 hr before hydrothermal synthesis resulted in particle size reduction and the highest amount of crystalline zeolite LTA: 79 wt.% from low carbon sludge and 65 wt.% from high carbon sludge. Notably, the zeolite crystallinity reported in this study was the higher than previous studies on this topic. The outlined approach may allow value adding of alum waste and produce a commodity which could be used locally by the water treatment plant as a water softener.     

Effect of Ca:Mg ratio and high ammoniacal nitrogen on characteristics of struvite precipitated from waste activated sludge digester effluent

This study revealed the relationship between the presence of calcium impurities and ammoniacal nitrogen concentration upon crystallization of struvite. The research hypothesis was that the presence of both calcium and high concentrations of ammoniacal nitrogen(328–1000 mg/L) in waste activated sludge may influence the struvite quality and acid stability. Hence, we studied the impact of Ca:Mg ratio upon morphology, particle size, purity and dissolution of struvite, in the presence of varying levels of excess ammoniacal nitrogen. X-ray diffraction revealed that up to 31.4%amorphous material was made which was assigned to hydroxyapatite. Increasing the ammoniacal nitrogen concentration and elevation of the Mg:Ca ratio maximized the presence of struvite. Struvite particle size was also increased by ammoniacal nitrogen as was twinning of the crystals. Tests with dilute solutions of organic acid revealed the sensitivity of struvite dissolution to the physical characteristics of the struvite. Smaller particles(21.2 μm) dissolved at higher rates than larger particles(35.86 μm). However,struvite dissolved rapidly as the p H was further reduced irrespective of the physical characteristics. Therefore, addition of struvite to low p H soils was not viewed as beneficial in terms of controlled nutrient release. Overall, this study revealed that waste activated sludge effluent with high ammoniacal nitrogen was prospective for synthesis of high quality struvite material.     

European Farmland Bird Distribution Explained by Remotely Sensed Phenological Indices

Birds are important components of biodiversity conservation since they are capable of indicating changes in the general status of wildlife and of the countryside. The Pan-European Common Bird Monitoring Scheme (PECBM) has been launched by the BirdLife Partnership in Europe, where the European Bird Census Council has been collecting data from 20 independent breeding bird survey programs across Europe over the last 25 years. These data show dramatic declines in European farmland birds. We suggest that seasonal characteristics of vegetation cover derived from high temporal resolution remote sensing images could facilitate the monitoring the suitability of farmland bird habitats, and that these indicators may be a better choice for monitoring than climate data. We used redundancy analysis to link the PECBM data of the estimated number of farmland birds in Europe to a set of phenological and climatic indicators and to the biogeographic regions of Europe. Variance partitioning was used to account for the variation explained by the phenological and climate variables and by the area of the environmental strata individually, to define the pure effect of the variables, and to extract the total explained variance. The analysis revealed high statistical significance (p < 0.001) of the correlations between species and environment. Phenological indices explained 38% of the variance in community composition of the 23 farmland bird species, whereas climate explained 30% of the variance. After partitioning the other variables as covariables, the pure effect of phenology, climate, and environmental strata were 16%, 8%, and 16%, respectively. Based on the probability results, we suggest that phenological indicators derived from remote sensing may supply better indicators for continental scale biodiversity studies than climate only. In addition, these indicators are cost and time effective, are on continuous scale, and are readily repeatable on a large spatial coverage while supplying standardized results.     

Leaching of copper,chromium and arsenic in a soil of south west Victoria,Australia

The movement of copper, chromium and arsenic originating from samples of the wood preservative Tanalith® through mildly acidic, sandy loam soil was investigated. Small, undisturbed soil cores (of dimensions 15 × 15 × 15 cm) were removed from the topsoil of a paddock adjacent to the Glenelg River in the Western District of Victoria, Australia. The paddock soils were thin (<30cm) greyish brown, mildly acidic, sandy loams with a moderate organic carbon content (2–5%) overlying a limestone cap. Tanalith® was applied to the surface of the cores which were then irrigated with deionised water at approximately 30 mm day^‐1. Copper concentrations in all leachate remained at background levels throughout the experiment, and this element was found to be immobilised in the top 4 cm of the soil. Up to 29% of the applied dose of chromium was detected in the leachate, with breakthrough occurring within 20 days of Tanalith® application. Up to 13% ofthe applied dose ofarsenic was detected in the leachate, although in this case breakthrough was not observed until 25 days after Tanalith® application and leachate concentrations were still rising when the experiment came to a close. Significant concentrations of arsenic and chromium were found in the top 6 cm of the soil profile.     

Environmental fate of pesticides used in Australian viticulture IV. Aqueous stability of dithianon

Dithianon formulations are unstable in slightly basic aqueous solutions (pH 9, 20°C, t _½ = 5.6 h) but relatively stable in neutral or acidic solution (pH 4,20°C, t _½ = 6443 h). To ensure the efficacy of this fungicide it is important to prepare the spray mix fresh with neutral or slightly acidic water. Dithianon is unstable towards natural sunlight in the solid and aqueous phase, with half‐lives of approximately 68 and 42 days, respectively. Thermal hydrolysis does not seem to be the preferred degradation pathway when aqueous solutions are heated by the South Australian summer sun. The major aqueous phase photodegradation product has been identified as 2,3‐dihydro‐1,4‐dithiaanthraquinone. These results strongly suggest that should dithianon be accidentally released into basic Australian waters then it is likely to be rapidly chemically hydrolysed and pose little long term environmental threat. However, dithianon is only slowly chemically and photo‐lytically hydrolysed in neutral and acidic waters, and in this case accidentally release may pose a significant short term environmental threat.     

Preferential leaching of nitrate,chloride and phosphate in an Australian clay soil

This paper investigates leaching of water and nutrients (NO^‐ ₃, Cl^‐, PO^3‐ ₄) from the unsaturated layer in an Australian soil using a multisegment percolation system (MPS). Large undisturbed soil cores were collected from a clay‐based, basaltic plain, agricultural soil at Grassmere, 300 km west of Melbourne, Australia. Significant heterogeneity (or preferential flow) of effluent moisture and solutes was detected (one‐way ANO VA, p < 0.001). Fifty percent of the applied nitrate and chloride leached from the soil core within three days after initial application. Hundred percent of the applied nitrate and chloride leached from the soil core within 8 days after application. These results indicate little incorporation into the soil matrix, and possible denitrification or mineralisation. In contrast, after 18 days, less than 1 % of the total applied phosphates leached from the soil, indicating strong adsorption. Our experiments indicate considerable heterogeneity in water flow patterns and solute leaching on a small spatial scale. Very rapid transport of nitrate and chloride through the soil was evident, in comparison phosphate leaching was negligible. These results have important implications for the management of nutrient schedules in agricultural soils, particularly those located in the Western District of Victoria, Australia.