Seasonal and diurnal measurements of carbon monoxide and nonmethane hydrocarbons at Mt. Wilson,California: Indirect evidence of atomic Cl in the Los Angeles basin

We present a study of the seasonal and diurnal variability of carbon monoxide and selected volatile organic compounds in the Los Angeles area. Measurements were made during four different nine-day field campaigns in April/May, September, and November, 2007, and February, 2008, at the Mt. Wilson sampling site, which is located at an elevation of approximately 1700 m in the San Gabriel Mountains overlooking Pasadena and the Los Angeles basin. The results were used to characterize the Mt. Wilson site as a representative location for monitoring integrated Los Angeles basin emissions, and, by reference to carbon monoxide emissions, to estimate average annual emissions. The considerable seasonal variability of many hydrocarbons, in both their measured mixing ratios and their relationship to carbon monoxide, was indicative of variable source strengths. Most interestingly, perturbation of C₄ hydrocarbon ratios suggested an enhanced role for chlorine chemistry during the month of September, likely as the result of Los Angeles’ coastal location. Such coastal influence was confirmed by observations of enhanced mixing ratios of marine halocarbons, as well as air mass back trajectories.     

Influence of uncertain reaction rates on ozone sensitivity to emissions

Air quality models rely upon simplified photochemical mechanisms to efficiently represent the thousands of chemical species that interact to form air pollution. Uncertainties in the chemical reaction rate constants and photolysis frequencies that comprise those mechanisms can generate uncertainty in the estimation of pollutant concentrations and their responsiveness to emission controls. A high-order sensitivity analysis technique is applied to quantify the extent to which reaction rate uncertainties influence estimates of ozone concentrations and their sensitivities to precursor emissions during an air pollution episode in Houston, Texas. Several reactions were found to have much larger proportional effects on ozone’s sensitivities to emissions than on its concentrations. In particular, uncertainties in photolysis frequencies and in the rate of reaction between NO₂ and OH to form nitric acid can significantly influence the magnitude and sign of peak ozone sensitivity to nitrogen oxide (NO_x) emissions. Ozone sensitivity to VOCs exhibits a much more muted response to uncertainties in the reaction rate constants and photolysis frequencies considered here. The results indicate the importance of accurate reaction rate constants to predicting the ozone impacts resulting from NO_x emission controls.     

Evaluation of ion exchange resins for the removal of dissolved organic matter from biologically treated paper mill effluent

In this study, the efficiency of six ion exchange resins to reduce the dissolved organic matter (DOM) from a biologically treated newsprint mill effluent was evaluated and the dominant removal mechanism of residual organics was established using advanced organic characterisations techniques. Among the resins screened, TAN1 possessed favourable Freundlich parameters, high resin capacity and solute affinity, closely followed by Marathon MSA and Marathon WBA. The removal efficiency of colour and lignin residuals was generally good for the anion exchange resins, greater than 50% and 75% respectively. In terms of the DOM fractions removal measured through liquid chromatography–organic carbon and nitrogen detector (LC–OCND), the resins mainly targeted the removal of humic and fulvic acids of molecular weight ranging between 500 and 1000 g mol^?1, the portion expected to contribute the most to the aromaticity of the effluent. For the anion exchange resins, physical adsorption operated along with ion exchange mechanism assisting to remove neutral and transphilic acid fractions of DOM. The column studies confirmed TAN1 being the best of those screened, exhibited the longest mass transfer zone and maximum treatable volume of effluent. The treatable effluent volume with 50% reduction in dissolved organic carbon (DOC) was 4.8 L for TAN1 followed by Marathon MSA – 3.6 L, Marathon 11 – 2.0 L, 21K-XLT – 1.5 L and Marathon WBA – 1.2 L. The cation exchange resin G26 was not effective in DOM removal as the maximum DOC removal obtained was only 27%. The resin capacity could not be completely restored for any of the resins; however, a maximum restoration up to 74% and 93% was achieved for TAN1 and Marathon WBA resins. While this feasibility study indicates the potential option of using ion exchange resins for the reclamation of paper mill effluent, the need for improving the regeneration protocols to restore the resin efficiency is also identified. Similarly, care should be taken while employing LC–OCND for characterising resin-treated effluents, as the resin degradation is expected to contribute some organic carbon moieties misleading the actual performance of resin.     

Role of black carbon in the distribution of polychlorinated dibenzo-p-dioxins/dibenzofurans in aged field-contaminated soils

Floodplain soils containing elevated levels of polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs) were collected from several locations along the Tittabawassee River (Michigan, USA). The PCDD/F profiles of these soils exhibited distinct congener patterns consistent with byproducts from either chloralkali manufacturing or chlorophenols productions. Black carbon (BC) particles were isolated for the first time from floodplain soil impacted by PCDD/Fs. Petrographic analysis showed that BC particles, including coal, oxidized coal, metallurgical coke, depositional carbon, coal tar/pitch, cenosphere, and charcoal, comprised approximately 30% by volume of the organic fraction with size range of 250 μm-2000 μm from a typical floodplain soil. The BC particles with anthropogenic origin such as pitch and coke associated with the chloralkali production process served as both the source and subsequent transporter for the highly hydrophobic PCDD/Fs. These anthropogenic BC particles were enriched with high levels of PCDFs, containing approximately 1000-fold the concentration found in the bulk soil. The strong association of PCDD/Fs with anthropogenic BC directly impacts the physicochemical and biological availability thus the risk associated with these hydrophobic organochlorines in soils and sediments.     

Emission characteristics of ultrafine particles and volatile organic compounds in a commercial printing center

Laser printers are one of the common indoor equipment in schools, offices, and various other places. Laser printers have recently been identified as a potential source of indoor air pollution. This study examines the characteristics of ultrafine particles (UFPs, diameter <100 nm) and volatile organic compounds (VOCs) emitted from laser printers housed in a commercial printing center. The results indicated that apart from the printer type, the age of printers, and the number of pages printed, the characteristics of UFPs emitted from printers also depend on indoor ventilation conditions. It was found that at reduced ventilation rates of indoor air, there was a rise in the number concentration of UFPs in the printing center. Interestingly, the contribution of UFPs to the total number of submicrometer-sized particles was observed to be higher at a sampling point far away from the printer than the one in the immediate vicinity of the printer. Black carbon (BC) measurements showed a good correlation (rs = 0.82) with particles in the size range of 100-560 nm than those with diameters less than 100 nm (rs = 0.33 for 50-100 nm, and rs = -0.19 for 5.6-50 nm particles). Measurements of VOCs in the printing center showed high levels of m-, o-, and p-xylene, styrene, and ethylbenzenes during peak hours of printing. Although toluene was found in higher levels, its concentration decreased during peak hours compared to those during nonoperating hours of the printing center.     

Natural emissions for regional modeling of background ozone and particulate matter and impacts on emissions control strategies

Natural emissions adopted in current regional air quality modeling are updated to better describe natural background ozone and PM concentrations for North America. The revised natural emissions include organosulfur from the ocean, NO from lightning, sea salt, biogenic secondary organic aerosol (SOA) precursors, and pre-industrial levels of background methane. The model algorithm for SOA formation was also revised. Natural background ozone concentrations increase by up to 4 ppb in annual average over the southeastern US and Gulf of Mexico due to added NO from lightning while the revised biogenic emissions produced less ozone in the central and western US. Natural PM_2.5 concentrations generally increased with the revised natural emissions. Future year (2018) simulations were conducted for several anthropogenic emission reduction scenarios to assess the impact of the revised natural emissions on anthropogenic emission control strategies. Overall, the revised natural emissions did not significantly alter the ozone responses to the emissions reductions in 2018. With revised natural emissions, ozone concentrations were slightly less sensitive to reducing NOx in the southeastern US than with the current natural emissions due to higher NO from lightning. The revised natural emissions have little impact on modeled PM_2.5 responses to anthropogenic emission reductions. However, there are substantial uncertainties in current representations of natural sources in air quality models and we recommend that further study is needed to refine these representations.     

A New Approach of BioCO2 Fixation by Thermoplastic Processing of Microalgae

Effective sequestration of carbon dioxide (CO₂) by algae reduces greenhouse gases effect on global warming. Algae biomass or residual such as biomeal from algae biofuel processing can be judiciously used for industrial applications such as fertilizer, animal feed, and plastics. Conversion of algae into useful plastic materials can be accomplished by extrusion technology. During algal plastic manufacturing, up to 20% thermoplastic algal blends can be fixated into or encapsulated by a non-biodegradable polymer such as polyolefin, which is known to be resistant to abiotic or biotic degradation. As a result, CO₂ that is captured by algae through photosynthesis is permanently stored in a form of biomass and will not be released back into the atmosphere. The extrusion of microalgae reported in this article is a novel process to sequester CO₂ and at the same time it makes a good use of the algae biomass in plastic manufacturing. Mechanical properties of the thin plastic films containing microalgae are comparable to the neat polyurethane or polyethylene films. Injection molded articles containing microalgae are dimensionally stable. However, a lower tensile strength, especially elongation at break, is observed in comparison to the neat polypropylene.     

CHARGES FOR URBAN RUNOFF: ISSUES IN IMPLEMENTATION1

ABSTRACT: Maryland officials have identified stormwater utilities as a potential method of financing programs to control nutrients in urban stormwater runoff that are proposed in Maryland's Chesapeake Bay Nutrient Reduction Plan. This paper reviews a number of issues related to the equity, efficiency and acceptability of user charge schemes. Overall, charges are found to be preferable to property taxes from both equity and efficiency perspectives. In addition, evidence suggests that elected officials will support creation of utilities. Obstacles to the implementation of utilities are identified.     

Tourist Support for Marine Protection in Nha Trang,Viet Nam

Environmental planners often propose tourism as a means of financing programmes to protect significant environmental areas. Surveys of tourists can provide useful information about the significance of environmental problems, trade-offs among policy objectives, willingness to pay (WTP) for protection programmes and preferences for different payment mechanisms. In Khanh Hoa Province, the provincial People's Committee, the Ministry of Fisheries and the World Conservation Union are working to implement Viet Nam's first marine protected area (MPA) in Nha Trang Bay. This paper reports the results of a survey of local and other Vietnamese and foreign tourists to islands that will be included in the MPA. The majority of respondents thought rubbish on the beaches, water pollution and vendors on beaches were problems and that the MPA was a good idea. Foreign tourists were significantly more likely to perceive environmental problems than were Vietnamese tourists, and persons who agreed there were environmental problems were significantly more likely to support the concept of an MPA, despite the potential for possible economic effects with distributive consequences. WTP for protection was modest and positively correlated with education and income. Although foreign tourists were on average willing to pay more, a larger proportion of Vietnamese tourists were willing to pay some amount to support the MPA. Analyses indicate that changes in income and education expected with economic development will increase both awareness of problems and WTP for protection. The results of this analysis are both encouraging and cautionary. The need for an MPA is clearly recognized by most tourists, and most tourists are willing to pay small fees to support the MPA. Given that education has significant impacts on both perceptions of problems and WTP, educational programmes may be an effective strategy for managing the competing objectives of protection and use.     

Appropriate water supply and sanitation technology for developing countries in tropical monsoon climates

Summary In the past, the water supply and sewage services for the urban regions of developing countries have been provided, in the main, only for the more affluent areas of these cities. This paper, dealing especially with those countries with tropical monsoon climates, advocates the construction of more comprehensive systems.Experience drawn from a wide range of projects and a review of the relevant literature provokes the authors to emphasise the need for suitable manuals of appropriate technology for use in these developing countries. These manuals should provide a full set of environmental guidelines for the design of water supply and sewage/sanitation systems for use in these countries.Dr Harvey F. Ludwig is Chairman and Greg Browder is Environmental Engineer for SEATEC International Consulting Engineers, Bangkok, Thailand.