Modeling weekday/weekend ozone differences in the Los Angeles region for 1997

Numerous studies of ambient ozone (O3) in the Los Angeles (LA) area have found both increases and decreases in elevated O3 levels on weekends, depending on location and year. Since the mid-1990s, average daily maximum O3 levels have been higher on weekends than on weekdays throughout most of the area. We used the Comprehensive Air-Quality Model with extensions to investigate causes of weekday/weekend O3 differences in the LA area for August 3-7, 1997, from the Southern California Ozone Study. Weekday/weekend emission changes were estimated, because explicit weekend inventories are not yet available from regulatory agencies. Changes to on-road motor vehicle (MV) emissions were derived from observed weekday/weekend traffic differences. The estimated changes in MV emissions of nitrogen oxides (NOx) were a 5% increase on Friday, a 27% decrease on Saturday, and a 37% decrease on Sunday, relative to Monday-Thursday levels. The corresponding changes in MV volatile organic carbon (VOC) emissions were an 8% increase on Friday, an 8% decrease on Saturday, and a 15% decrease on Sunday. Modeling these MV emissions changes explained the observed weekend O3 effect very well. Furthermore, changes to the mass of MV NOx emissions were the main contributor to O3 differences rather than changes to the timing of MV emissions. Ozone increases on weekends were caused by NOx emission decreases, because O3 formation is strongly VOC-limited throughout most of the LA area.     

Laboratory-scale comparison of anaerobic-digestion alternatives.

Laboratory-scale digesters were used to perform side-by-side evaluations of alternative digestion systems including thermophilic-mesophilic-phased digestion (TPAD), acid/methane-phased digestion, mesophilic digestion, and the performance of the thermophilic stage of TPAD alone. Total detention times in the systems evaluated varied from 8 to 20 days. Temperatures in the mesophilic stage of TPAD were varied from 35 to 43.3 degrees C and temperatures in the thermophilic stage were varied from 55 to 58.9 degrees C. The purpose of the study was to evaluate volatile solids (VS) reduction and thickening properties of the different systems. Parameters evaluated included solids, volatile acids, gas production and quality, various chemical constituents of the sludge, and thickening properties using polymer and ferric chloride plus polymer. The TPAD systems were found capable of higher VS destruction at total detention times of 10 and 12.5 days compared to single-stage mesophilic or thermophilic digestion at 15 to 20 days. A laboratory-scale thickening test was performed to evaluate thickening properties. Based on obtaining 95% capture in the test, the polymer demand of mesophilic and acid-methane-phased digestion was the lowest. The TPAD system required approximately 180% of the dosage of the mesophilic sludge and thermophilic sludge required approximately 310% of the dosage. Temperatures of 40.5 and 43.3 degrees C in the mesophilic stage of TPAD were found to increase the polymer requirement and decrease the VS reduction of the TPAD system. Higher temperatures (above 56.1 degrees C) and lower detention times (less than 15 days) in the thermophilic digesters seemed to result in problems with degradation of volatile acids, particularly propionic acid.     

Impact of transverse and longitudinal dispersion on first-order degradation rate constant estimation

A two-dimensional analytical model is employed for estimating the first-order degradation rate constant of hydrophobic organic compounds (HOCs) in contaminated groundwater under steady-state conditions. The model may utilize all aqueous concentration data collected downgradient of a source area, but does not require that any data be collected along the plume centerline. Using a least squares fit of the model to aqueous concentrations measured in monitoring wells, degradation rate constants were estimated at a former manufactured gas plant (FMGP) site in the Midwest U.S. The estimated degradation rate constants are 0.0014, 0.0034, 0.0031, 0.0019, and 0.0053 day(-1) for acenaphthene, naphthalene, benzene, ethylbenzene, and toluene, respectively. These estimated rate constants were as low as one-half those estimated with the one-dimensional (centerline) approach of Buscheck and Alcantar [Buscheck, T.E., Alcantar, C.M., 1995. Regression techniques and analytical solutions to demonstrate intrinsic bioremediation. In: Hinchee, R.E., Wilson, J.T., Downey, D.C. (Eds.), Intrinsic Bioremediation, Battelle Press, Columbus, OH, pp. 109-116] which does not account for transverse dispersivity. Varying the transverse and longitudinal dispersivity values over one order of magnitude for toluene data obtained from the FMGP site resulted in nearly a threefold variation in the estimated degradation rate constant-highlighting the importance of reliable estimates of the dispersion coefficients for obtaining reasonable estimates of the degradation rate constants. These results have significant implications for decision making and site management where overestimation of a degradation rate may result in remediation times and bioconversion factors that exceed expectations. For a complex source area or non-steady-state plume, a superposition of analytical models that incorporate longitudinal and transverse dispersion and time may be used at sites where the centerline method would not be applicable.     

Assessment of intrinsic bioremediation of a coal-tar-affected aquifer using Two-dimensional reactive transport and Biogeochemical mass balance approaches.

Expedited site characterization and groundwater monitoring using direct-push technology and conventional monitoring wells were conducted at a former manufactured gas plant site. Biogeochemical data and heterotrophic plate counts support the presence of microbially mediated remediation. By superimposing solutions of a two-dimensional reactive transport analytical model, first-order degradation rate coefficients ((day-1) ) of various compounds for the dissolved-phase plume were estimated (i.e., benzene [0.0084], naphthalene [0.0058], and acenaphthene [0.0011]). The total mass transformed by aerobic respiration, nitrate reduction, and sulfate reduction around the free-phase coal-tar dense-nonaqueous-phase-liquid region and in the plume was estimated to be approximately 4.5 kg/y using a biogeochemical mass-balance approach. The total mass transformed using the degradation rate coefficients was estimated to be approximately 3.6 kg/y. Results showed that a simple two-dimensional analytical model and a biochemical mass balance with geochemical data from expedited site characterization can be useful for rapid estimation of mass-transformation rates.     

Local and Indigenous management of climate change risks to archaeological sites

Hundreds of thousands of significant archaeological and cultural heritage sites (cultural sites) along the coasts of every continent are threatened by sea level rise, and many will be destroyed. This wealth of artefacts and monuments testifies to human history, cosmology and identity. While cultural sites are especially important to local and Indigenous communities, a stall in coordinated global action means adaptation at a local scale is often unsupported. In response, this paper produces a practical climate change risk analysis methodology designed for independent, community-scale management of cultural sites. It builds on existing methods that prioritise sites most at risk from climate impacts, proposing a field survey that integrates an assessment of the relative cultural value of sites with assessment of exposure and sensitivity to climate impacts. The field survey also stands as a monitoring program and complements an assessment of organisational adaptive capacity. The preliminary field survey was tested by Indigenous land managers in remote northern Australia at midden and rock art sites threatened by sea level rise, extreme flood events and a range of non-climactic hazards. A participatory action research methodology—incorporating planning workshops, semi-structured interviews and participant observations—gave rise to significant modifications to the preliminary field survey as well as management prioritisation of 120 sites. The field survey is anticipated to have global application, particularly among marginalised and remote Indigenous communities. Well-planned and informed participation, with community control, monitoring and well-informed actions, will contribute significantly to coordinated global and regional adaptation strategies.     

An Assessment of Residues from Duct Injection Demonstration Sites

The duct injection retrofit process for flue gas cleanup of sulfur dioxide emissions has been demonstrated at several sites in the United States through a series of U.S. Department of Energy research projects. As a subcontractor on one of the projects, the University of North Dakota Energy & Environmental Research Center performed a comprehensive characterization of four residues from three demonstration sites. The characterization task objective was to facilitate understanding of materials handling and to identify potential disposal and utilization options for these high-volume coal utilization solid residues. Characterization included evaluation of the physical and engineering properties, chemical composition, mineralogy, and leaching potential. Chemical characterization results provided interesting and valuable information from the standpoint of the bulk chemistry and phase assemblages, as well as potential environmental issues associated with the use or disposal of these materials. Results of the chemical and mineralogical characterizations indicate that duct injection residues will be suitable for specific utilization applications and that disposal of these residues should be similar to many conventional coal combustion residues. Significant mineralogical phase changes were noted in long-term leaching experiments.     

"What Works Well; What Needs Improvement": Lessons in public consultation from British Columbia's resource planning processes

Resource planning and management in British Columbia, Canada, has been steadily moving towards more active public participation. While government agencies have long been required to consult the general public during the course of land or resource use planning, the 1990s brought in a period of more intense public involvement. In terms of resource planning, this led to the creation of several new planning processes. Given that there is now considerable experience with the Commission on Resources and Environment (CORE) and the Land and Resource Management Plan (LRMP) processes, it is time for an appraisal. In particular, the paper examines the public's perceptions of these processes with respect to 'what works well' and 'what needs improvement'. The results highlight a number of areas to which process designers and managers should direct attention. There are three key items of note. First, there are generally low levels of awareness by respondents of public consultation processes in their community. Second, there is a need for access to timely, relevant and readable information throughout the course of the process in order to keep participants and the public as up-to-date as possible. Finally, there must be greater clarity about the process itself, including mandates, participants and decision-making powers.     

The concept of the Portuguese National Ecological Reserve: constraints and impossibilities in the Azores Archipelago

The biophysical features of small islands (SI) distinguish them from other territories; isolation, small size and several anthropogenic pressures reduce the resilience of ecosystems and increase their vulnerability to global changes. Many SI have a shortage of infrastructures, institutions and technical/financial resources that hinder planning and require different integrated solutions. In Portugal, the National Ecological Reserve (NER) is legally binding for spatial planning instruments. It aims to defend natural values and areas of ecological value, or sensibility, or susceptible to natural hazards. However, the criteria for the design of NER are strictly set for mainland territory, not taking into account specific features of small islands. A case study of the Azores Archipelago is used to demonstrate that spatial planning instruments should be adapted to island contexts. Such adaptation will increase the effectiveness of their implementation in relation to the protection of natural resources, stability of biophysical structures and prevention of natural hazards. Observing the main differences between mainland and the Azores Archipelago it is possible to define a methodological transposition of the NER aims and goals into an island context. This approach is an answer to the constraints in effective adaptation of spatial planning instruments for islands.