Interpreting measures of economic loss: Evidence from contingent valuation and experimental studies

From the standpoint of conventional welfare theory, it is surprising that responses to contingent valuation studies of environmental goods have shown a consistent difference between willingness to pay and compensation demanded measures of economic loss. This paper examines these results in light of four reasons most often given as grounds for their dismissal. New experimental evidence supports an interpretation of the observed disparity in payment-and compensation-based measures as both real and psychologically meaningful. An alternative conceptual framework, suggested by prospect theory, is outlined and its relevance for economic assessments of potential environmental change is discussed briefly.     

SYNTHESIS OF FLOW-DURATION CURVES FOR UNREGULATED STREAMS IN NEW HAMPSHIRE1

ABSTRACT: Flow-duration curves are concise pictures of flow variability at a point on a stream, and provide essential information for all water-resource planning. In New Hampshire, useful estimates of flow-duration curves for ungaged points on unregulated streams can be made using only information readily available from contour maps: 1) area of the basin above the point of interest; and 2) either the measured mean basin elevation or the elevations of the highest and lowest points in the basin. Measured or estimated mean basin elevation is then used in regression equations to estimate mean flow QC and the flow exceeded 95% of the time, Q₉₅. QC is assumed to occur at the 27% exceedance frequency. Q₀₂, Q₀₅, and Q₃₀ are estimated as multiples of QC. Equations are provided for calculating 95% confidence intervals for future estimates using the method. The dependence of mean flow on elevation is due to positive vertical precipitation gradients and negative vertical evapotranspiration gradients. The dependence of Q₉₅ on elevation appears to be due largely to the fact that it rains more often, that snowmelt takes longer, and that evapotranspiration is reduced at higher elevations.     

The behavioral component in the meaning of places

How do people think about the physical setting in the world around them? Part of the answer to this question may be in terms of the behaviors that occur there. To explore people's knowledge of behavior—place associations, twenty places (shown via color photographs) were assessed in five ways: (a) ratings of the place's suitability for each of eleven behaviors, (b) ratings of the expected frequency of occurrence of the eleven behaviors, (c) free listings of reasons for going to each place, (d) free listings of activities-while-there and (e) free listings of activities associated with the place. Results showed that people can distinguish places on the basis of behaviors, that the behavioral component of place meaning is composed of distinct aspects, and that knowledge of behavior is related to a global, overall representation of a place.     

Particulate emissions from construction activities

Although it has long been recognized that road and building construction activity constitutes an important source of particulate matter (PM) emissions throughout the United States, until recently only limited research has been directed to its characterization. This paper presents the results of PM10 and PM2.5 (particles < or = 10 microm and < or = 2.5 microm in aerodynamic diameter, respectively) emission factor development from the onsite testing of component operations at actual construction sites during the period 1998-2001. Much of the testing effort was directed at earthmoving operations with scrapers, because earthmoving is the most important contributor of PM emissions across the construction industry. Other sources tested were truck loading and dumping of crushed rock and mud and dirt carryout from construction site access points onto adjacent public paved roads. Also tested were the effects of watering for control of scraper travel routes and the use of paved and graveled aprons at construction site access points for reducing mud and dirt carryout. The PM10 emissions from earthmoving were found to be up to an order of magnitude greater than predicted by AP-42 emission factors drawn from other industries. As expected, the observed PM2.5:PM10 emission factor ratios reflected the relative importance of the vehicle exhaust and the resuspended dust components of each type of construction activity. An unexpected finding was that PM2.5 emissions from mud and dirt carryout were much less than anticipated. Finally, the control efficiency of watering of scraper travel routes was found to closely follow a bilinear moisture model.     

Novel Biocomposites Sheet Molding Compounds for Low Cost Housing Panel Applications

Biocomposites were made by a novel high volume processing technique named biocomposite sheet molding compound panel (BCSMCP) manufacturing process. This process design was inspired by the commercial glass fiber–polyester resin composite fabrication method called sheet molding compounding (SMC). This process yields continuous production of biocomposites on a large scale, and thus can be easily adopted in industries. A unique fiber dispersion method, which enabled uniform distribution of natural fibers, was used in this process. Consistency of the process was tested by evaluating the repeatability of the resultant materials mechanical properties. The low cost biocomposites produced as a result of the processing will be used for various panel applications such as housing and transportation. The molded samples were tested for various mechanical and thermal properties, in accordance with ASTM procedures. The biocomposites were made with various natural fibers including, big blue stem grass, jute, and industrial hemp. By combining different natural fibers in varying mass fractions, hybrid biocomposites were made using this process. Grass fiber reinforced polyester biocomposites processed by the SMC line showed very promising results.     

Sustainable Cellular Biocomposites from Natural Fibers and Unsaturated Polyester Resin for Housing Panel Applications

Increased environmental awareness and interest in long-term sustainability of material resources has motivated considerable advancements in composite materials made from natural fibers and resins, or biocomposites. In spite of these developments the lower stiffness and strength of biocomposites has limited their applications to non-load-bearing components. This paper presents an overview of a study aimed at showing that the shortcomings of biocomposites can be overcome through hybrid material designs and efficient structural configurations to make them suitable for load bearing structural components. Hybrid blends of natural and synthetic fibers can significantly improve the characteristics of biocomposites with minimal cost and environmental impact, and hierarchical cellular designs can maximize material efficiency in structural components. Periodic and hierarchical cellular plate designs made from natural fibers and unsaturated polyester resin were evaluated experimentally and analytically. Stiffness, strength, and dimensional stability of all-biocomposite and hybrid natural–synthetic material systems were evaluated through material tests while structural performance of cellular plate designs was assessed through flexural tests on laboratory-scale samples. The experimental results were correlated with analytical models for short-fiber composites and cellular structures. The results showed that biocomposites have adequate short-term performance and that they can efficiently compete with housing panels made from conventional structural materials.     

Maximum rates of nitrate removal in a denitrification wall

Denitrification walls are constructed by mixing a carbon source such as sawdust into soils through which ground water passes. These systems can reduce nitrate inputs to receiving waters by enhancing denitrification. Maximum rates of nitrate removal by denitrification need to be determined for design purposes. To determine maximum rates of nitrate removal we added excess nitrate (50 mg N L(-1)) to a trench up-gradient of a denitrification wall during a 9-d trial. Bromide (100 g L(-1)) was also added as a conservative tracer. Movement of nitrate and bromide was measured from shallow wells and soil samples were removed for measurements of denitrification, carbon availability, nitrate, and other microbial parameters. Rates of nitrate removal, determined from the ratio of NO3-N to Br and ground water flow, averaged 1.4 g N m(-3) of wall d(-1) and were markedly greater than denitrification rates determined using the acetylene block technique (average: 0.11 g N m(-3) of wall d(-1)). These nitrate removal rates were generally lower than reported in other denitrification walls. Denitrification rates increased when nitrate was added to the laboratory incubations, indicating that despite large nitrate inputs in the field, denitrification remained limited by nitrate. This limitation was partially attributed to nitrate predominantly moving through zones of greater hydraulic conductivity or in the mobile fraction of the ground water and slow diffusion to the immobile fraction where denitrifiers were active.     

Application of Cellulose Microfibrils in Polymer Nanocomposites

Cellulose microfibrils obtained by the acid hydrolysis of cellulose fibers were added at low concentrations (2–10% w/w) to polymer gels and films as reinforcing agents. Significant changes in mechanical properties, especially maximum load and tensile strength, were obtained for fibrils derived from several cellulosic sources, including cotton, softwood, and bacterial cellulose. For extruded starch plastics, the addition of cotton-derived microfibrils at 10.3% (w/w) concentration increased Young’s modulus by 5-fold relative to a control sample with no cellulose reinforcement. Preliminary data suggests that shear alignment significantly improves tensile strength. Addition of microfibrils does not always change mechanical properties in a predictable direction. Whereas tensile strength and modulus were shown to increase during addition of microfibrils to an extruded starch thermoplastic and a cast latex film, these parameters decreased when microfibrils were added to a starch–pectin blend, implying that complex interactions are involved in the application of these reinforcing agents.     

Gravity model formulation for an extensive National Parkway Site

The purpose of this study was to collect specific information on the characteristics and intensity of local Blue Ridge Parkway use and to use that information to develop a recreation use model of local Parkway visitation. Data were obtained from a self-administered mail-back questionnaire sent to a random sample of people living in the 29 counties adjacent to the Parkway.We developed two recreation use projection/demand models that employ three variables (distance, alternative recreation sites, and population density) to predict visitation to different Parkway areas from various local origins. The derived model estimates indicated that about one-fourth of all Parkway visits in 1978 were one-day visits made by area residents.     

A multilevel model of emotional skills,communication performance,and task performance in teams

There is increasing research regarding the influence of emotions on teamwork. In this study, we use a multilevel approach to examine how team members' use of emotion‐related skills affects team task performance and communication performance within the team. We measured individual self‐reported emotional skills prior to team formation and then collected peer‐rated individual communication performance and independently rated team task performance eight weeks later. Although there was no influence at the individual level between emotional skills and performance, team‐level emotional skills positively predicted team task performance scores. At the cross level, team‐level emotional skills predicted individual‐level communication performance. These findings emphasize the importance of distinct team emotional skills in shaping both team performance and individual team member performance. Copyright © 2011 John Wiley & Sons, Ltd.