Assessment of Potential Capability of Water Bamboo Leaves on the Adsorption Removal Efficiency of Cationic Dye from Aqueous Solutions

Removal of toxic pollutants from water and wastewater is becoming an important process with the increase of industrial activities. The present study focused on assessing the suitability and efficiency of water bamboo leaves (WBL) for the removal of cationic dye from aqueous solutions. The effect of different variables in the batch method including solution pH (2–12), initial dye concentration (50–250 mg L^?1), adsorbent dose (0.05–0.30 g), contact time (5–180 min) and temperature (283–333 K) on the dye removal was investigated. The adsorption kinetics was discussed in view of four kinetics models. The results showed that the pseudo-second-order kinetics model described dye adsorption on WBL very well. The experimental equilibrium data were also tested by four isotherm models. It was found that adsorption of dye on WBL fitted well with the Langmuir isotherm model, implying the binding energy on the whole surface of the adsorbent was uniform and the dye molecules onto the surface of the adsorbent were monolayer coverage. Calculation of various thermodynamic parameters of the adsorption process indicated feasibility and exothermic nature of dye adsorption.     

高硫石油焦的脱硫研究

采用湿化学氧化和高温煅烧相结合的方法对含硫量6.28%(w)的石油焦进行二段脱硫处理,并利用FTIR、SEM和XRD技术对脱硫机理进行了探讨。实验结果表明:氧化工段的优化条件为硝酸与30%(w)双氧水的体积比1∶2、氧化时间10 h、氧化温度80℃、液固比35 m L/g、石油焦粒径106μm以下,优化条件下的氧化脱硫率为26.91%;煅烧工段的优化条件为1 280℃下煅烧6 h,优化条件下的煅烧脱硫率为79.43%,总脱硫率为83.95%。表征结果显示:经处理后石油焦中的黄铁矿类无机硫以及硫醇类和大部分噻吩类有机硫得到有效脱除,剩余噻吩硫转变为更稳定的形式;处理后的石油焦微观形貌轮廓变得清晰和圆润;处理前后石油焦的石墨雏晶结构基本未发生变化。     

某矿区农田土壤重金属潜在生态风险评价及形态分析研究

对广西某矿区农田土壤中的Cd、Pb、Zn、Hg进行潜在生态风险评价及存在形态分析.结果表明,研究区域Cd为极强危害程度,Pb和Hg为很强危害程度,Zn为中等危害程度,所有采样点位均处于很强危害程度,其中主要的贡献来自于Cd.形态分析结果表明,Cd以可交换态为主,Pb以碳酸盐态和铁锰氧化态为主,Zn以残渣态、有机结合态和铁锰氧化态为主,Hg以残渣态和有机结合态为主.次生相与原生相分布比值法与潜在生态风险评价法评价结果存在差异,两种方法的评价结果均应加以考虑.     

白城市环境保护“十三五”规划思路与主要任务

白城市是吉林省重要的防风固沙屏障,但是受客观存在的不利因素与多年来人为的不合理开发影响,生态环境仍然较为脆弱.“十三五”期间,立足白城生态环境实际,以提升环境质量为主线,以突出的环境问题为导向,以生态保护与修复为重点,实施河湖连通工程、造林绿化工程、土地整理工程、湿地保护工程、草原治理工程等5大工程.针对关系百姓切身利益的环境问题,以大气、水、土壤为重点,实施蓝天工程、清水工程、土壤恢复治理工程.健全生态制度,推进生态文明建设,实现区域环境质量得到较大提高和生态脆弱环境得到明显改善.     

污泥厌氧发酵产酸关键影响因素的函数模型研究

本研究以城市剩余污泥预处理液作为底物,调节底物不同C/N比,测定了厌氧发酵过程中几种关键酶的酶活及发酵产物乙酸、丙酸及丁酸的浓度.同时,利用Matlab软件通过回归分析和函数拟合构建了C/N比-关键酶活-酸产量之间的多项式函数模型,发现所建立的二元三次多项式模型的拟合优度R2均大于0.9,且残差平方和较小,因此,判定二元三次多项式更适合描述C/N比-关键酶活-酸产量的数学关系.最后,建立了关键酶活、C/N比和产酸量三因素间的曲面模型,发现该模型能够很好地描述污泥厌氧发酵中C/N比条件对关键酶和产酸类型的影响,并能进一步预测C/N比所对应的酶活和产酸发酵类型,可为今后的实验研究及工程放大提供理论参考.     

Gasoline Evaporation–Ethanol and Nonethanol Blends

Tests were performed to compare the evaporation rate of 10 volume percent (vol%) ethanol-blended gasoline (E10) with the evaporation rate of its base gasoline. Weight loss, temperature, pressure, and humidity were monitored as lab-blended E10 and base gasolines were evaporated concurrently from glass cylinders placed on balances located side by side under an exhaust hood. The averaged results of four tests at about 70°F showed that the E10 lost more total weight to evaporation than the base fuel, but less gasoline. The increased weight was due to ethanol, which was present in the E10 evaporative emissions at concentrations of about 13 weight percent (wt%). In two-hour tests at temperatures near 70°F, during which 4.5 to 5.3 wt% of initial fuel samples were evaporated, E10 fuels lost an average of about 5% less gasoline than their base fuels. A similar result was obtained for a one-hour test, during which about 2.4 to 2.5 wt% of the initial fuel samples were evaporated. Gas chromatography (GC) component analysis indicated that the compositions of the ethanol-free emissions from the two fuels were similar. Reid vapor pressure (RVP) measurements made using a Grabner CCA-VPS according to ASTM D5191-91 indicated that E10 fuels underwent an approximate 5% greater RVP reduction than their respective base fuels.     

Ag/Ag2SO3 plasmonic catalysts with high activity and stability for CO2 reduction with water vapor under visible light

Environmental Science and Pollution Research - The conversion of CO2 into useful raw materials for fuels and chemicals by solar energy is described using a plasmonic photocatalyst comprised of Ag...     

Binding characteristics of Cu2+ to natural humic acid fractions sequentially extracted from the lake sediments

Humic acids (HAs) determine the distribution, toxicity, bioavailability, and ultimate fate of heavy metals in the environment. In this work, ten HA fractions (F1–F10) were used as adsorbent, which were sequentially extracted from natural sediments of Lake Wuliangsuhai, to investigate the binding characteristics of Cu²⁺ to HA. On the basis of the characterization results, differences were found between the ten extracted HA fractions responding to their elemental compositions and acidic functional groups. The characterization results reveal that the responses of ten extracted HA fractions to their elemental compositions and acidic functional groups were different. The O/C and (O + N)/C ratio of F1–F8 approximately ranged from 0.66 to 0.53 and from 0.72 to 0.61, respectively; the measured results showed that the contents of phenolic groups and carboxyl groups decreased from 4.46 to 2.60 mmol/g and 1.60 to 0.58 mmol/g, respectively. The binding characteristics of Cu²⁺ to the ten HA fractions were well modeled by the bi-Langmuir model; the binding behavior of Cu²⁺ to all the ten HA fractions were strongly impacted by pH and ionic strength. The FTIR and SEM-EDX image of HA fractions (pre- and post-adsorption) revealed that carboxyl and phenolic groups were responsible for the Cu²⁺ sorption on the ten sequentially extracted HA fractions process, which is the same with the analysis of the ligand binding and bi-Langmuir models Accordingly, the adsorption capacity of the former HA fractions on Cu²⁺ were higher than the latter ones, which may be attributed to the difference of carboxyl and phenolic group contents between the former and latter extracted HA fractions. Additionally, the functional groups with N and S should not be neglected. This work is hopeful to understand the environmental effect of humic substances, environmental geochemical behavior, and bioavailability of heavy metals in lakes.

     

Early detection and evaluation of waste through sensorized containers for a collection monitoring application

The present study describes a novel application for use in the monitoring of municipal solid waste, based on distributed sensor technology and geographical information systems. Original field testing and evaluation of the application were carried out in Pudong, Shanghai (PR China).The local waste management system in Pudong features particular requirements related to the rapidly increasing rate of waste production. In view of the fact that collected waste is currently deployed to landfills or to incineration plants within the context investigated, the key aspects to be taken into account in waste collection procedures include monitoring of the overall amount of waste produced, quantitative measurement of the waste present at each collection point and identification of classes of material present in the collected waste. The case study described herein focuses particularly on the above mentioned aspects, proposing the implementation of a network of sensorized waste containers linked to a data management system.Containers used were equipped with a set of sensors mounted onto standard waste bins. The design, implementation and validation procedures applied are subsequently described. The main aim to be achieved by data collection and evaluation was to provide for feasibility analysis of the final device. Data pertaining to the content of waste containers, sampled and processed by means of devices validated on two purpose-designed prototypes, were therefore uploaded to a central monitoring server using GPRS connection. The data monitoring and management modules are integrated into an existing application used by local municipal authorities.A field test campaign was performed in the Pudong area. The system was evaluated in terms of real data flow from the network nodes (containers) as well as in terms of optimization functions, such as collection vehicle routing and scheduling. The most important outcomes obtained were related to calculations of waste weight and volume. The latter data were subsequently used as parameters for the routing optimization of collection trucks and material density evaluation.     

Toxicity of tri- and penta-valent arsenic, alone and in combination, to the cladoceran Daphnia carinata: the influence of microbial transformation in natural waters

The acute toxicity of arsenic(III) and arsenic(V) alone and in combination to a cladoceran, Daphnia carinata, was studied in both cladoceran culture medium and natural water collected from a local suburban stream. As(III) was found to be more toxic than As(V) to Daphnia survival. The LC₅₀ values for As(III), As(V), and As(III) + As(V) were 0.554, 1.499, and 0.692 mg l⁻¹, respectively. Although various species of As, particularly As(III) and As(V) co-exist together in natural waters, the existing guidelines for water quality are based on individual As species. The results of this investigation suggest that As(III) and As(V) can interact either synergistically or additively resulting in an increase in the overall toxicity of the mixture compared to individual As species. Also, indigenous microorganisms in natural water may play a significant role in the transformation of As, thereby influencing the toxicity of As in receiving waters. This study clearly suggests that the joint action of As species should be considered in the development of water quality guidelines. To our knowledge this is the first study on the interactive effect of As(III) and As(V) to a cladoceran. Thus, this study suggests that these two species of As, when present together above 0.1 mg l⁻¹ concentration, are toxic to fresh water invertebrates; therefore, pollution with these compounds may adversely affect natural ecosystems.