泡沫法分离表面活性物质的效率研究

本文介绍泡沫法净化表面活性废水的效率.探讨提浓效率与原水表面活性物质浓度的关系以及pH值与硬度对提浓效率的影响.     

一种新型的染料废水脱色混凝剂

亲水性染料废水用化学絮凝法处理效果较差。针对活性染料含有磺酸基的特点,对双氰胺-甲醛缩合物进行改性,获得一种分子量和电荷密度均可调节的阳离子聚合物MG。对MG的特性进行表征,研究不同性能MG在活性艳红X-3B的脱色净化中多种影响因素的规律,表明MG是一种性能稳定,有应用前景的染料废水处理剂。     

印染废水中低含量阴离子洗涤剂的二次标准加入法测定

用次氯酸钠-亚硝酸钠-氨基磺酸铵颅处理,以消除染料对测定的干扰;采用二次标准加入法,并利用简单的迭代运算,求得被测液中阴离子洗涤剂含量。本方法对印染废水的测定上下限分别为6.0mg/L和0.75mg/L。经5个实验室对LAS含量为0.78mg/L和6.7mg/L的实际印染废水的协作试验验证,其重复性相对标准偏差分别为5.0和4.5％,再现性相对标准偏差为5.2和9.7％。     

潜在有毒化学品优先控制名单筛选方法研究

在收集了国内外共37个不同化学品名单基础上,研究了我国潜在有毒化学品的筛选程序和评分系统。根据环境的9项指标和毒性的7项指标共16个参数,运用模糊数学方法计算了化学品的综合危害分值,藉此按其危害程度予以排序,从而选定了52种优先控制的有毒化学品名单,旨在对化学品应采取的适宜管理对策提供有效的科学依据。      

催化光度法测定环境样品中微量Hg的研究

在酸性介质中,痕量Ｈｇ（Ⅱ）能显著催化空气中的Ｏ２氧化Ｋ４［Ｆｅ（ＣＮ）６］,生成蓝色化合物,反应对Ｈｇ（Ⅱ）为一级,催化反应的表观活化能为６２．９５ｋＪ·ｍｏｌ－１．据此建立了测定痕量Ｈｇ（Ⅱ）的动力学分析法,测定条件为Ｋ４［Ｆｅ（ＣＮ）６］：１．４×１０－３ｍｏｌ·Ｌ－１,［ＣＨ３ＣＯＯＨ］：０．１４ｍｏｌ·Ｌ－１,７５℃．在此条件下,线性测定范围为０．０２—０．７０μｇ·ｍｌ－１．本法重现性好,常见共存离子中除Ａｇ（Ｉ）严重干扰外,其余离子不影响测定．测定了水样及污泥样品中的Ｈｇ含量,结果满意     

一株高效解磷细菌的紫外诱变选育及其在红壤稻田施用效果

红壤对磷有强大吸附固定力,磷肥易被土壤中活性铁、铝固定而使有效态磷转化为各种形态的非有效磷,从而大大降低磷肥的利用率。解磷菌能使土壤中难溶性或不溶性的磷转化为易于被植物吸收利用的磷。通过对江西鹰潭红壤分离筛选并经过紫外诱变获得一株性状稳定的高效解磷细菌Y8。经鉴定,菌株Y8为蜡状芽孢杆菌（Bacillus cereus）。通过与生产中应用的徐州华龙高效复合菌肥厂的解磷细菌X3相比,菌株Y8降解有机磷、溶解Ca3（PO4）2的能力均比较高,分别为155.3mg·L^-1和240.1mg·L^-1。研究各种理化因子对菌株Y8解磷能力的影响,确定了菌株Y8的最佳培养条件为葡萄糖20g·L^-1、NH4（SO4）21.5g·L^-1、pH7.0、温度为35℃,在该条件下菌株Y8溶解Ca3（PO4）2的量为295.6mg·L^-1。在江西鹰潭红壤稻田的施用试验表明,将菌株Y8制成微生物菌剂施用于水稻田可起到减施化肥的作用。     

Study on low-temperature plasma γ-Al2O3 catalytic viscosity reduction of polyacrylamide solution

The wide use of polyacrylamide (PAM) in enhanced oil recovery generates a large amount of polymer-bearing wastewater featuring high viscosity and difficult viscosity reduction, making the treatment of wastewater increasingly difficult. In this paper, the experimental study on reducing the viscosity of wastewater containing polyacrylamide by using the plasma generated by dielectric barrier discharge (DBD) and the synergistic effect of catalyst γ-Al₂O₃ is carried out. The law of plasma reducing the viscosity of wastewater containing polyacrylamide is studied under the different conditions of amounts of γ-Al₂O₃ catalyst, discharge voltages, and initial concentrations of polyacrylamide-containing wastewater. The mechanism of viscosity reduction of polyacrylamide is studied through environmental scanning electron microscope (ESEM), Fourier transform infrared (FTIR) spectrometer, and X-ray photoelectron spectroscopy (XPS). The results show that the catalytic viscosity reduction is the best when the discharge voltage is 18 kV and the discharge time is 15 min. With the increase in the input of the γ-Al₂O₃ catalyst, the viscosity of the PAM solution decreases gradually. When the amount of γ-Al₂O₃ is 375 mg, the shear rate changes from 0.5 1/sec to 28 1/sec, and the viscosity of the solution containing polyacrylamide changes from 434.5 mPa·s to 40.2 mPa·s. The viscosity reduction rate of the PAM solution is 90.7%. After the catalytic viscosity reduction, the functional groups of polyacrylamide do not change much. The elemental composition of the catalyst has not changed, which is still Al, C, and O.

     

The combined effect of titanium dioxide nanoparticles and cypermethrin on male reproductive toxicity in rats

Environmental Science and Pollution Research - Titanium nanoparticles and pyrethroid pesticides are now being widely used in industrial, agriculture, and biomedical applications. In recent years,...     

我国汽车排气污染现状与发展

从汽车保有量,油口消耗、污染物排放和城市大气环境质量等方面分析了我国汽车污染现状及２０００年和２０１０年２个时段的发展趋势,从节能,净化和管理的角度初步分析了削减汽车污染物排放的综合对策。     

三元缔合物抑制分光光度法测定痕量氟

利用氟离子对锆－水杨基荧光酮－溴化十六烷基三甲基铵三元缔合物形成的竞争抑制作用,建立了测定痕量氟的抑制分光光度法,确定了测定的最佳条件为：「ＳＡＦ」＝６．０×１０＾－５ｍｏｌ．Ｌ＾－１「ＣＴＭＡＢ」＝８．０×１０＾－４ｍｏｌ．Ｌ＾－１,「Ｚｒ（ＩＶ）」＝１．０μｇ．ｍｌ＾－１,「ＨＣｌ」＝０．０８ｍｏＬ．Ｌ＾－１,２５℃。