Statistical accuracy for estimations of large wood blockage in a reservoir environment

Environmental Fluid Mechanics - The blockage of weirs or bridges by in-stream wood can reduce the flood discharge capacity, leading to hazardous situations. To assess the related risk, blocking...     

Characterization and pyrolysis of Chlorella vulgaris and Arthrospira platensis: potential of bio-oil and chemical production by Py-GC/MS analysis

Environmental Science and Pollution Research - Biofuels have been seen as potential sources to meet future energy demand as a renewable and sustainable energy source. Despite the fact that the...     

Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10³ to 6.8 × 10⁸ MPN s^?1. TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.     

The methylic versus the ethylic route: considerations about the sustainability of Brazilian biodiesel production

Brazil is considered one of the world’s leading producers of biofuels given the predominance of ethanol fuel in its energy matrix. However, despite the prominence of Brazil in ethanol production, the vast majority of biodiesel production plants in Brazil use methanol instead of ethanol as the alcohol for transesterification reaction, as is generally the case in the rest of the world. The aim of this paper is therefore to examine the transesterification process in the Brazilian biodiesel production in terms of sustainability. In this regard, it was necessary to evaluate the way in which the industrial process is currently carried out, the role of government incentives or subsidies for the use of ethanol to produce biodiesel, and the investments of companies in technology development for the same purpose. This study presents indications that the development of the biodiesel market in Brazil is still oriented toward a production model which is inconsistent with the environmental and social aspects of sustainability.     

Modeling a spatially restricted distribution in the Neotropics: How the size of calibration area affects the performance of five presence-only methods

We here examine species distribution models for a Neotropical anuran restricted to ombrophilous areas in the Brazilian Atlantic Forest hotspot. We extend the known occurrence for the treefrog Hypsiboas bischoffi (Anura: Hylidae) through GPS field surveys and use five modeling methods (BIOCLIM, DOMAIN, OM-GARP, SVM, and MAXENT) and selected bioclimatic and topographic variables to model the species distribution. Models were first trained using two calibration areas: the Brazilian Atlantic Forest (BAF) and the whole of South America (SA). All modeling methods showed good levels of predictive power and accuracy with mean AUC ranging from 0.77 (BIOCLIM/BAF) to 0.99 (MAXENT/SA). MAXENT and SVM were the most accurate presence-only methods among those tested here. All but the SVM models calibrated with SA predicted larger distribution areas when compared to models calibrated in BAF. OM-GARP dramatically overpredicted the species distribution for the model calibrated in SA, with a predicted area around 10⁶ km² larger than predicted by other SDMs. With increased calibration area (and environmental space), OM-GARP predictions followed changes in the environmental space associated with the increased calibration area, while MAXENT models were more consistent across calibration areas. MAXENT was the only method that retrieved consistent predictions across calibration areas, while allowing for some overprediction, a result that may be relevant for modeling the distribution of other spatially restricted organisms.     

Steel mill waste application in soil: dynamics of potentially toxic elements in rice and health risk perspectives

Environmental Science and Pollution Research - Potentially toxic elements (PTEs) are of great concern in steel mill wastes. Therefore, in order to use them as potential fertilizers in soil, risk...     

Soil contamination in Colombian playgrounds: effects of vehicles,construction, and traffic

The presence of potentially hazardous elements (PHEs) in playground soils is generally associated with anthropogenic sources such as vehicle traffic, industries, construction sites, and biomass burning. Studies indicate that PHEs are harmful to human health and may even be carcinogenic. Therefore, the aim of this study was to evaluate the physicochemical, morphological, and mineralogical properties of soil samples from three public playgrounds located in the cities of Bogota, Medellin, and Barranquilla. Besides, the possible impacts caused by the aerodynamics of particles in Colombian cities were verified. The morphology, composition, and structure of the nanoparticles (NPs) (< 100 nm) present in these soils were evaluated by field emission scanning electron microscopy (FE-SEM) equipped with high-precision field emission (FE) and high-resolution transmission electron microscopy (HR-TEM). Soil samples were predominantly feldspar, quartz, and, to a lesser extent, clay minerals, carbonates, and hematites. The average content of PHEs was anthropogenically enriched in relation to the upper continental crust. As and Sn showed a large spatial variation, indicating the influence of local sources, such as vehicle traffic and industries. There is an inverse relationship between the total concentrations of some elements and their leachable fractions. The accumulation of traffic-derived PHEs has a negative impact on human health and the environment, which is alarming, especially for elements such as Pb, Sb, or As. Therefore, the presence of PHEs should receive greater attention from public health professionals, and limits should be set and exposures controlled. This study includes the construction of a baseline that provides basic information on pollution, its sources, and exposure routes for humans in the vicinity of Colombia’s major cities, characterized by their increasing urbanization and industrialization.

     

Can the environmental health of urban centers be assessed through pollutants trapped in lakes? A study case in the biggest city of the southern hemisphere

Environmental Science and Pollution Research - Air and water quality in urban centers are summited to pollution from different sources, such as industrial activities, traffic, and wastewater...     

Magnetic photocatalysts from δ-FeOOH and TiO2 and application in reactions for degradation of methylene blue and paracetamol with UV-C and sunlight

Environmental Science and Pollution Research - Water contamination is a common problem, especially considering dyes and drugs disposal. A possible and effective treatment method to remove these...     

Recycling of FRP composites: reusing fine GFRP waste in concrete mixtures

Fibre reinforced polymer (FRP) materials are being increasingly used in several applications, but especially in the construction and transportation industries. The composites industry is now producing a wide range of FRP products that include strengthening strips and sheets, reinforcing bars, structural profiles, sandwich panels, moulded planks and piping. The waste management of FRP materials, in particular those made with thermosetting resins, is a critical issue for the composites industry because these materials cannot be reprocessed. Therefore, most thermosetting FRP waste is presently sent to landfill, in spite of the significant environmental impact caused by disposing of it in this way. Because more and more waste is being produced throughout the life cycle of FRPs, innovative solutions are needed to manage it. This paper first presents a state-of-the-art review of the present alternatives available to manage FRP waste. It then describes an experimental study conducted on the technical feasibility of incorporating the fine waste generated during the manufacturing of glass fibre reinforced polymer (GFRP) composites in concrete mixtures. Tests were carried out to evaluate the fresh-state and hardened-state properties of concrete mixes in which between 0% and 20% of sand was replaced by GFRP fine waste. Although the incorporation of high proportions of GFRP waste was found to worsen concrete performance in terms of both mechanical and durability-related properties, it seems feasible to incorporate low proportions and reuse GFRP fine waste in concrete, particularly in non-structural applications such as architectural concrete or pavement slabs, where good mechanical properties are less important.