Adsorptive property of Cu^2＋-loaded montmorillonite clays for Escherichia coli K_（88） in vitro

The Cu²⁺-loaded montmorillonite clays (MMT-Cu) may be a good material for the adsorbed and eliminated pathogenic bacteria from aqueous solution.     

Effect of C/N ratio, aeration rate and moisture content on ammonia and greenhouse gas emission during the composting

Gaseous emission (N₂O, CH₄ and NH₃) from composting can be an important source of anthropogenic greenhouse gas and air pollution. A laboratory scale orthogonal experiment was conducted to estimate the effects of C/N ratio, aeration rate and initial moisture content on gaseous emission during the composting of pig faeces from Chinese Ganqinfen system. The results showed that about 23.9% to 45.6% of total organic carbon (TOC) was lost in the form of CO₂ and 0.8% to 7.5% of TOC emitted as CH₄. Most of the nitrogen was lost in the form of NH₃, which account for 9.6% to 32.4% of initial nitrogen. N₂O was also an important way of nitrogen losses and 1.5% to 7.3% of initial total nitrogen was lost as it. Statistic analysis showed that the aeration rate is the most important factor which could affect the NH₃ (p = 0.0189), CH₄ (p = 0.0113) and N₂O (p = 0.0493) emissions significantly. Higher aeration rates reduce the CH₄ emission but increase the NH₃ and N₂O losses. C/N ratio could affect the NH₃ (p = 0.0442) and CH₄ (p = 0.0246) emissions significantly, but not the N₂O. Lower C/N ratio caused higher NH₃ and CH₄ emissions. The initial moisture content can not influence the gaseous emission significantly. Most treatments were matured after 37 days, except a trial with high moisture content and a low C/N ratio.     

Characteristics of nitrogen and phosphorus removal in a sequencing batch reactor

Laboratory scale experiments were conducted to study the characteristics of N and P removal under different influent organic carbon concentration in a sequencing batch reactor (SBR) with simple anaerobic/aerobic operating mode. Experimental results indicated that, under the operating condition of influent N concentration of 89 mg/L and P concentration of 15 mg/L, when the influent C/N ratio increased from 1.5 to 6.9 (influent C/P ratio from 9 to 41), total N and P removal efficiency improved from 50% and 46% to 78% and 96% respectively. Track studies of N, P and other operating parameters demonstrated that N removal of the SBR was realized through simultaneous nitrification and denitrification (SND) in the aeration phase and anoxic denitrificaiton in the filling phase, P removal was accomplished through conventional anaerobic P release and aerobic P taken-up process. Keeping dissolved oxygen (DO) concentration during the first two aeration hours as low as 0.1-0.6 mg/L is essential for the simultaneous occurrences of nitrification, denitrification and P-taken up.     

东胜区三台基水库水质细菌的鉴定

为了初步探索环境微生物的快速测定法,提升应对微生物污染突发事件的能力,本文运用美国BD公司的细菌鉴定系统对东胜区三台基水库水质细菌进行了鉴定。结果共鉴定出6种细菌,其可信度分别为95.7、99．1、94．3、98．7、98．5、和99．2。结果表明该系统快速、准确、可靠,可以作为环境微生物分类鉴定和微生物污染突发事件应急监测的依据。     

谈建设项目竣工验收监测质量控制

质量控制是贯穿环境监测全过程的技术手段和管理程序,文章通过对建设项竣工验收监测质量控制进行阐述,其目的是为了提高我们的监测水平和能力,更好的保护好我们的生态环境。     

好氧颗粒污泥处理青霉素废水研究

青霉素在其生产过中产生大量的废水,其COD值较高,生化性较差,成分复杂,微生物难以降解,其处理技术是世界性难题。文章采用以葡萄糖模拟废水培养的好氧颗粒污泥为接种体,经青霉素废水逐步驯化后,使其完全处理青霉素废水。实验结果表明,应用好氧颗粒污泥技术,处理青霉素废水,COD,NH3_N,TP去除率较高,具有很好的处理效果。     

高温状态下受热时间对膨润土物性指标的影响∗

高温状态下膨润土的物性指标变化是高放核废物深地质处置库设计的重要参数之一。通过高温状态下不同受热时间MX80钠基膨润土的比重、液塑限、自由膨胀率试验,研究了受热时间对膨润土基本物性指标的影响规律;并通过热重分析(TGA)、X衍射(XDR)、电镜扫描(SEM)试验,从微观角度对上述变化规律进行了合理解释。研究结果表明:随着受热时间的增加,膨润土的比重、液塑限、自由膨胀率在受热15～30天内急剧下降,降幅分别为2.5%、3.1%和28.3%,之后各值变化量很小;高温状态下,膨润土的矿物成分转化、结合水脱附、微观形貌改变是膨润土物性指标发生变化的根本原因,三者之间相互作用和彼此影响。     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

Antimony smelting process generating solid wastes and dust：Characterization and leaching behaviors

A large amount of solid waste has been produced by the antimony smelting process in the＂World Capital of Antimony＂, Xikuangshan area in China. This study comprehensively investigated the physical and chemical characteristics of the various solid wastes, as well as the leaching behavior of the solid wastes, which included water-quenched slag,arsenic-alkali residue, desulfurized slag and blast furnace dust. These four types of waste were enriched in a variety of heavy metals and metalloids and more specifically with As and Sb levels up to 8.6 × 104 and 3.16 × 105mg/kg, respectively, in arsenic-alkali residue. For desulfurized slag and water-quenched slag, the leaching concentration of Sb significantly exceeded the acceptable limits during the leaching tests using the toxicity characteristic leaching procedure and the synthetic precipitation leaching procedure. In addition, As leaching in arsenic-alkali residue was extraordinarily hazardous, being three orders of magnitude higher than the regulatory level of As. According to the results of the extraction tests, all the tested wastes were classified as hazardous waste.     

Phytoremediation of levonorgestrel in aquatic environment by hydrophytes

Adsorption and degradation of levonorgestrel （LNG） by two hydrophytes, Cyperus alternfolius （CA） and Eichhornia crassipes （EC）, were investigated under light-shielding conditions in the water column. Variations of LNG concentrations in water, plant root epidermis, root, stem and leaf of the plants were analyzed. The results indicated that the removal efficiency of LNG by hydrophytes over the period of 50 days was significantly greater than the blank control （p 〈 0.05）, with the removal rates of 79.80%± 3.10% and 78.86% ± 2.55% for CA and EC, respectively. Compared with bio-adsorption, bio-conversion of LNG was found to be the dominant elimination pathway, evidenced by relatively high conversion rates （77.31% ±2.68% for CA and 77.82% ± 2.95% for EC）, while the adsorption rates were lower （1.77% ± 0.90% for CA and 1.05% ± 0.40% for EC）. The bio-adsorption and conversion of LNG showed no significant differences between the two hydrophytes. Additionally, the mineralization on root epidermis played an important role in the reduction of LNG in water.