Mg2+ improves biomass production from soybean wastewater using purple non-sulfur bacteria

Soybean wastewater was used to generate biomass resource by use of purple non-sulfur bacteria (PNSB). This study investigated the enhancement of PNSB cell accumulation in wastewater by Mg²⁺ under the light-anaerobic condition. Results showed that with the optimal Mg²⁺ dosage of 10 mg/L, biomass production was improved by 70% to 3630 mg/L, and biomass yield also was improved by 60%. Chemical Oxygen Demand (COD) removal reached above 86% and hydraulic retention time was shortened from 96 to 72 hr. The mechanism analysis indicated that Mg²⁺ could promote the content of bacteriochlorophyll in photosynthesis because Mg²⁺ is the bacteriochlorophyll active center, and thus improved adenosine triphosphate (ATP) production. An increase of ATP production enhanced the conversion of organic matter in wastewater into PNSB cell materials (biomass yield) and COD removal, leading to more biomass production. With 10 mg/L Mg²⁺, bacteriochlorophyll content and ATP production were improved by 60% and 33% respectively.     

Cu(II), Fe(III) and Mn(II) combinations as environmental stress factors have distinguishing effects on Enterococcus hirae

Pollution by various heavy metals as environmental stress factors might affect bacteria. It was established that iron (Fe(III)), manganese (Mn(II)) and copper (Cu(II)) ion combinations caused effects on Enterococcus hirae that differed from the sum of the effects when the metals were added separately. It was shown that the Cu²⁺-Fe³⁺ combination decreased the growth and ATPase activity of membrane vesicles of wild-type E. hirae ATCC9790 and atpD mutant (with defective F_oF₁-ATPase) MS116. Addition of Mn²⁺-Fe³⁺ combinations within the same concentration range had no effects on growth compared to control (without heavy metals). ATPase activity was increased in the presence of Mn²⁺-Fe³⁺, while together with 0.2 mmol/L N,N'-dicyclohexylcarbodiimide (DCCD), ATPase activity was decreased compared to control (when only 0.2 mmol/L DCCD was present). These results indicate that heavy metals ion combinations probably affect the FOF1-ATPase, leading to conformational changes. Moreover the action may be direct or be mediated by environment redox potential. The effects observed when Fe³⁺ was added separately disappeared in both cases, which might be a result of competing processes between Fe³⁺ and other heavy metals. These findings are novel and improve the understanding of heavy metals ions effects on bacteria, and could be applied for regulation of stress response patterns in the environment.     

Hg0 removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron (III) chloride were studied on alab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analy-ses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg²⁺). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃-HZSM-5 was mainly in the form of mercuric chloride(HgCl₂), while on FeCl₃-NaX and FeCl₃-NaA it was mainly mercuri coxide(HgO).     

Investigation of carbonyl compound sources at a rural site in the Yangtze River Delta region of China

Carbonyl compounds are important intermediates in atmospheric photochemistry, but their primary sources are still not understood well. In this work, carbonyls, hydrocarbons, and alkyl nitrates were continuously measured during November 2011 at a rural site in the Yangtze River Delta region of China. Mixing ratios of carbonyls and hydrocarbons showed large fluctuations during the entire measurement. The average level for total measured volatile organic compounds during the pollution episode from 25th to 27th November, 2011 was 91.6 ppb, about 7 times the value for the clean period of 7th-8th, November, 2011. To preliminarily identify toluene sources at this site, the emission ratio of toluene to benzene (T/B) during the pollution episode was determined based on photochemical ages derived from the relationship of alkyl nitrates to their parent alkanes. The calculated T/B was 5.8 ppb/ppb, significantly higher than the values of 0.2-1.7 ppb/ppb for vehicular exhaust and other combustion sources, indicating the dominant influence of industrial emissions on ambient toluene. The contributions of industrial sources to ambient carbonyls were then calculated using a multiple linear regression fit model that used toluene and alkyl nitrates as respective tracers for industrial emission and secondary production. During the pollution episode, 18.5%, 69.0%, and 52.9% of measured formaldehyde, acetaldehyde, and acetone were considered to be attributable to industrial emissions. The emission ratios relative to toluene for formaldehyde, acetaldehyde, and acetone were determined to be 0.10, 0.20 and 0.40 ppb/ppb, respectively. More research on industrial carbonyl emission characteristics is needed to understand carbonyl sources better.     

Pollution levels and characteristics of phthalate esters in indoor air of offices

The pollution status and characteristics of PAEs (phthalate esters) were investigated in indoor air of offices, and PAEs of both gas-phase and particulate-phase were detected in all the samples. The concentration (sum of the gas phase and the particulate phase) was 4748.24 ng/m³, ranging between 3070.09 and 6700.14 ng/m³. Diethyl phthalate, dibutyl phthalate, and di(2-ethylhexyl) phthalate were the most abundant compounds, together accounting for 70% of the Σ6PAEs. Dividing the particulate-phase PAEs into four size ranges (<2.5, 2.5-5, 5-10, >10 μm), the result indicated that PAEs in PM_2.5 were the most abundant, with the proportion of 72.64%. In addition, the PAE concentration in PM_2.5 correlated significantly with the total particulate-phase PAEs (R² = 0.85). Thus, the amount of PAEs in PM_2.5 can be estimated from the total amount of particulate-phase PAEs using this proportion. In a comparison between the offices and a newly decorated study room, it was found that pollution characteristics were similar between these two places. Thus, it is implied that the PAE concentration decreased by 50% 2 yr after decorating.     

Controlling cyanobacterial blooms by managing nutrient ratio and limitation in a large hypereutrophic lake: Lake Taihu, China

Excessive nitrogen (N) and phosphorus (P) loading of aquatic ecosystems is a leading cause of eutrophication and harmful algal blooms worldwide, and reducing nutrient levels in water has been a primary management objective. To provide a rational protection strategy and predict future trends of eutrophication in eutrophic lakes, we need to understand the relationships between nutrient ratios and nutrient limitations. We conducted a set of outdoor bioassays at the shore of Lake Taihu. It showed that N only additions induced phytoplankton growth but adding only P did not. Combined N plus P additions promoted higher phytoplankton biomass than N only additions, which suggested that both N and P were deficient for maximum phytoplankton growth in this lake (TN:TP = 18.9). When nutrients are present at less than 7.75-13.95 mg/L TN and 0.41-0.74 mg/L TP, the deficiency of either N or P or both limits the growth of phytoplankton. N limitation then takes place when the TN:TP ratio is less than 21.5-24.7 (TDN:TDP was 34.2-44.3), and P limitation occurs above this. Therefore, according to this ratio, controlling N when N limitation exists and controlling P when P deficiency is present will prevent algal blooms effectively in the short term. But for the long term, a persistent dual nutrient (N and P) management strategy is necessary.     

环境经济系统分类及协调发展判据研究

应用系统论对环境经济系统进行结构分析,并根据内部相互作用强弱对环境经济系统进行了分类;建立了环境经济协调发展判据,对区域环境经济协调发展问题进行了定量研究。     

固定化栅藻对污水的净化及其生理特征的变化

将斜生栅藻包埋固定在褐藻酸钙凝胶胶珠中。对人工配制的污水进行净化,研究其对污水中氨氮和正磷酸盐的净化效率以及净化过程中藻类的生长,叶绿素α含量、光合强度和过氧化物酶活性的变化。并与未固定的斜生栅藻（悬浮藻）进行对照比较,结果表明,由于固定化提高了斜生栅藻的合成代谢生理活性,延迟衰老,对污水中氨氮和正磷酸盐的净化效率明显提高     

镉对小鼠免疫毒性研究

采用体内试验和体外试验方法,观察氯化镉对小鼠免疫功能的影响。免疫后不同时间,给小鼠一次灌胃30mg/kgCdCl2,未见对免疫功能产生明显影响。反复多次灌胃染毒14天,在0.3mg/ks/d组可见明显抑制小鼠脾淋巴细胞IgM－pFC,抑制率为42.1％。体外试验表明,12.5μmol/LCdCl2与淋巴细胞作用48h,25μmol/LCdCl2作用72h,对淋巴细胞增殖反应抑制率分别为38.3％和77.8％,以上结果表明氟化钢具有明显的免疫毒性。     

Breccias of the Adnet Formation: indicators of a Mid-Liassic tectonic event in the Northern Calcareous Alps (Salzburg/Austria)

Stratigraphy, lithology and depositional structures of Liassic red limestone-breccias of the Adnet Formation, including the 'Adnet Scheck', were studied at several outcrops of the Northern Calcareous Alps (NCA) south-east of Salzburg. A four-fold lithostratigraphic division is proposed for the Adnet Formation of the Osterhorn Mountains: the hemipelagic Schmiedwirt (Sinemurian) and Kehlbach (Carixian) members are separated from the pelagic Saubach Member (Toarcian) by a layer of amalgamated breccias (Scheck Member, probably Domerian to early Toarcian). Several other breccia beds occur locally from the base of the Kehlbach Member up to the lower Saubach Member. Although the sediments overlying the Scheck Member breccias are of coeval age, the ages of the underlying strata are very different. This can be explained by submarine Liassic erosion during a period of resedimentation from the middle Carixian until the early Toarcian. At least 10–15?m of partly lithified sediments were eroded by gravity flows. The entire Kehlbach Member and up to two-thirds of the Schmiedwirt Member were removed at Adnet. The breccias originated from submarine debris flows. Repeated flows over a long period and the depositional setting exclude a triggering by sea-level fluctuations. Most probably they arose from tectonically triggered slumps and slides of superficial sediments. The 'Scheck' was initiated on the steep upper slope of the drowned Triassic Adnet reef and flowed to the north-east.The Pliensbachian to early Toarcian period of tectonic activity indicated by the breccias was the most important during the Liassic in the Osterhorn Mountains and other parts of the NCA. From the large-scale regional distribution of the breccias and in accord with published data, a roughly north-east trending strike-slip fault zone is proposed, crossing the NCA south of the Osterhorn block, with a peaking activity during the Pliensbachian to early Toarcian as the cause of the tectonic movements.