Remediation of acid mine drainage (AMD)-contaminated soil by Phragmites australis and rhizosphere bacteria

Experiments were conducted to assess the impact of citric acid (CA) and rhizosphere bacteria on metal uptake in Phragmites australis cultured in a spiked acid mine drainage (AMD) soil. Rhizosphere iron-oxidizing bacteria (Fe(II)OB) enhanced the formation of Fe plaque on roots, which decreased the uptake of Fe and Mn. CA inhibited the growth of Fe(II)OB, decreased the formation of metal plaque, raised the metal mobility in soil, and increased the accumulation of metals in all tissues of the reeds. The higher the CA dosage, the more metals accumulated into reeds. The total amount of metals in reeds increased from 7.8?±?0.5?×?10^?6 mol plant^?1 (Mn), 1.4?±?0.1?×?10^?3 mol plant^?1 (Fe), and 1.0?±?0.1?×?10^?4 mol plant^?1 (Al) in spiked soil without CA to 22.2?±?0.5?×?10^?6 mol plant^?1 (Mn), 3.5?±?0.06?×?10^?3 mol plant^?1 (Fe), and 5.0?±?0.2?×?10^?4 mol plant^?1 (Al) in soil added with 33.616 g C₆H₈O₇·H₂O for per kilogram soil. CA could be effective at enhancing the phytoremediation of metals from AMD-contaminated soil.     

Hazardous substances in indoor dust emitted from waste TV recycling facility

Various hazardous substances contained in waste TV sets might be released into environment via dust during recycling activities. Two brominated flame retardants (BFRs), polybrominated diphenyl ethers (PBDEs), and tetrabromobisphenol A (TBBPA), and five kinds of heavy metals (Cu, Pb, Cd, Cr, and Ni) were detected in indoor dust collected from two workshops (TV dismantling workshop and subsequent recycling workshop). PBDEs concentrations in dust from waste wires recycling line (722,000 ng/g) were the highest among the studied sites, followed by those in manual dismantling–sorting line (117,000 ng/g), whereas TBBPA concentrations were the highest in manual dismantling–sorting line (557 ng/g) and printed circuit board (PCB) recycling line (428 ng/g). For heavy metals, Cu and Pb were the most enriched metals in all dust samples. The highest concentration of Pb (22,900 mg/kg) was found in TV dismantling workshop-floor dust. Meanwhile, Cu was the predominant metal in dust from the PCB recycling line, especially in dust collected from electrostatic separation area (42,700 mg/kg). Occupational exposure assessment results showed that workers were the most exposed to BDE-209 among the four PBDE congeners (BDE-47, BDE-99, BDE-153, and BDE-209) in both workshops. The hazard quotient (HQ) indicated that noncancerous effects were unlikely for both BFRs and heavy metals (HQ?<?1), and carcinogenic risks for Cd, Cr, and Ni (risk?<?10^?6) on workers in two workshops were relatively low.     

悬挂链生物接触氧化工艺处理河道污水

采用悬挂链曝气式接触氧化工艺在3个时段内处理城市河道污水,通过采用磷脂法、TTC-脱氢酶活性法和MPN法研究载体表面生物膜特性,来验证装置的水质净化效果。结果表明,进水水质变化幅度较大的时段1内,水质对缺氧区和好氧区内生物膜量及活性有很大冲击,对污染物的去除效果影响不大,COD、NH+4-N、TN和TP的平均去除率分别达到75.9%、80.8%、64.6%和78.3%;进水水质稳定的时段2内,缺氧区和好氧区内生物膜量和活性要高于其他时段,COD、NH+4-N、TN和TP的平均去除率分别达到77.0%、80.6%、69.4%和55.3%;低温运行的时段3内,缺氧区和好氧区内生物膜量和活性都低于其他时段,水质净化效果明显下降,COD、NH+4-N、TN和TP的平均去除率分别为71.1%、68.5%、48.9%和46.6%。     

质子化改性交联壳聚糖的制备及其吸附硫酸根离子的性能

以壳聚糖为原料,甲醛为氨基保护剂,戊二醛为交联剂,采用反相悬浮交联法制备交联壳聚糖,再对其进行质子化改性得到质子化改性交联壳聚糖吸附剂。通过正交实验对该吸附剂的制备条件进行优化,并对其吸附水中硫酸根（SO₄^2-）的吸附等温特性和动力学进行研究,最后对制备和吸附过程进行能谱分析（EDS）并对吸附剂进行了再生实验。实验结果表明,交联反应的优化条件为：反应温度50℃、反应时间6 h、甲醛：戊二醛：壳聚糖为4.5：0.5：3（质量比）;该吸附过程符合Langmuir吸附等温模型,在25℃（298 K）下,吸附容量最大可达133.87 mg/g;吸附过程较好地符合拟二级动力学模型;EDS分析表明了交联反应、质子化改性和吸附反应均已发生;该吸附剂的再生性能良好,可以重复使用。     

二氧化钛脱除高温烟气中的氯化氢

HCl是城市垃圾焚烧产生的主要气体污染物之一。将一种新型脱氯剂TiO2引入到垃圾焚烧系统中,并与其他脱氯剂的性能进行比较。研究了不同脱氯剂使用量、不同反应温度和不同HCl气体浓度对TiO2、CaO和CaTiO3脱氯效果的影响。结果显示,TiO2能在高温(800~1 000℃)、高HCl浓度(1 303.6~1 629.5 mg/m3)下获得较好的脱氯效果。与传统的脱氯剂CaO相比,TiO2更适合于高温烟气脱氯,其在1 000℃时的氯容(36.3 mg HCl/g TiO2)几乎是相同情况下的CaO氯容(9.3 mg HCl/g CaO)的4倍。而CaTiO3的脱氯效果不但受到自身分解效率的影响,还受到TiO2和CaO脱氯效果的影响,其脱氯效果较差。     

煅烧的水滑石同时去除水体中砷和氟

为探讨水滑石类材料对水体中氟、砷离子的同时去除效果,采用共沉淀法合成(Mg∶Al=2∶1)纳米类水滑石(LDHs),用傅立叶转换红外光谱、电子扫描透射电镜、X射线晶体衍射等手段对合成的材料进行了表征,并研究纳米材料在不同初始浓度、pH、吸附时间、阴离子干扰条件下其同时除砷氟性能。结果表明,煅烧后的水滑石(LDOs)对砷最大吸附量为51.02 mg/g,对氟最大吸附量为36.63 mg/g。吸附动力学实验表明,煅烧水滑石对砷的吸附在前6 h内基本完成,对氟的吸附在前10 h内基本完成。砷氟共存溶液保持pH=4~10及pH=6~8时,水滑石分别对砷、氟保持良好的吸附效率。对比不同阴离子对水滑石共除砷氟效率的影响,水滑石除砷速率受到阴离子影响力大小为:HPO2-4CO2-3NO-3Cl-SO2-4;水滑石除氟速率受到阴离子影响力大小为:CO2-3HPO2-4SO2-4Cl-NO-3。材料再生循环利用4次后,对砷和氟的吸附效率均能达到90%以上。实验结果表明,所合成的水滑石是一种优秀的能共除砷氟的吸附剂。     

南京某城市污水二级处理系统中酞酸酯类的分布及去除特征

以南京某城市污水厂污水和污泥中的酞酸酯类（PAEs）为研究对象,分别采用固相萃取-气相色谱-质谱联用（SPE—Gc．Ms）和超声提取．气相色谱．质谱联用（USE—GC—Ms）检测其中的优先控制污染物邻苯二甲酸二甲酯（DMP）、邻苯二甲酸二乙酯（DEP）、邻苯二甲酸二丁酯（DBP）和邻苯二甲酸单（2-乙基己基）酯（MEHP）,研究其在厌氧／好氧（A／O）污泥处理过程中的分布特征及降解规律。研究结果表明,各类PAEs在该污水厂的污水和污泥中均有检出,二级处理出水中4种酞酸酯类物质的浓度在0．151—2．419μg／L。污水中4种酞酸酯的分布规律为MEHP〉DBP〉DMP〉DEP,污泥中4种酞酸酯的分布规律为MEHP〉DBP〉DEP〉DMP。该污水厂二级处理工艺对4种PAEs的去除效果较明显,去除效率DBP〉DEP〉DMP〉MEHP．     

The influences of pH and ionic strength on the sorption of tylosin on goethite

As one of the widely used antibiotics in the world, the environmental risks of tylosin (TYL) received more and more attention. In order to assess its environmental fate and ecological effects accurately, it is necessary to understand the sorption properties of TYL on the soils/sediments. The sorption of TYL on goethite at different pH and ionic strength conditions were measured through a series of batch experiments and the sorption data of TYL were fitted by Freundlich and dual-mode sorption models. It was obvious that sorption was strongly dependent on pH and ionic strength. Sorption capacity of TYL increased as the pH increased and ionic strength decreased. The pH and ionic strength-dependent trends might be related with complexation between cationic/neutral TYL species and goethite. The sorption affinity of TYL on goethite decreased as ionic strength increased, which only occurred at higher TYL concentrations, suggested that inner complex might have dominated process at low concentrations and outer complex might occur at higher concentrations of TYL. Spectroscopic evidence indicated that tricarbonylamide and hydroxyl functional groups of TYL might be accounted for the sorption on mineral surfaces. The experimental data of TYL sorption could be fitted by surface complexation model (FITEQL), indicating that ≡FeOH with TYL interaction could be reasonably represented as a complex formation of a monoacid with discrete sites on goethite. The sorption mechanism of TYL might be related with surface complexation, electrostatic repulsion, and H-bounding on goethite. It should be noticed that the heterogeneous of sorption affinity of TYL on goethite at various environment to assess its environment risk.     

氯化镁复配硫酸铝混凝性能及絮体特性

在研究氢氧化镁混凝特性的基础上,复配氯化镁和硫酸铝作为混凝剂,以高岭土配水水样为研究对象,运用iPDA在线监测技术对混凝过程絮体形成进行监测,探讨了单独使用氯化镁和硫酸铝以及二者复配使用的混凝效果和絮体特性,确定复配使用的各种条件。结果表明,对于浊度20 NTU,pH 11.5的高岭土配水水样,氯化镁、硫酸铝最佳投加量分别为7.2 mg/L(Mg2+计)和3 mg/L(Al3+计);硫酸铝跟氯化镁复配使用时,先投加硫酸铝,间隔30 s后投加氯化镁,混凝效果较好;在镁离子最佳投加量7.2 mg/L时,铝和镁最佳质量比在1∶3~1∶2之间;镁铝复配时其FI值明显大于单独作用时,即絮体尺寸大小:二者复配硫酸铝氯化镁,而且复配条件下Zeta电位值在零电势左右浮动,浮动范围小,更利于聚集沉淀;镁铝复配时发生了协同效应,弥补了单独使用氯化镁混凝过程的不足。     

CuO/γ-Al2O3类Fenton试剂降解丁基黄药

CuO/γ-Al2O3类Fenton试剂是降解丁基黄药的优良试剂。该试剂与传统的Fenton试剂相比,提高了反应的pH值,可在较高pH(4~5)条件下反应,而传统的Fenton试剂的适宜pH值一般在3以下。采用单因素实验和正交实验相结合的方法研究了pH、催化剂投加量、过氧化氢投加量以及反应时间对丁基黄药降解效果的影响,并对催化剂的使用寿命进行了探讨。研究结果表明,反应的最佳条件为:pH为4~5,催化剂投加量为6 g/L,过氧化氢用量为30 mg/L,反应30min。在此反应条件下,丁基黄药的降解率达98%以上;影响丁基黄药降解效果的因素大小顺序为:pH>反应时间>H2O2用量>催化剂投加量,其中pH对CuO/γ-Al2O3类Fenton试剂降解丁基黄药的影响最为显著。