Fate of CL-20 in sandy soils: degradation products as potential markers of natural attenuation

Hexanitrohexaazaisowurtzitane (CL-20) is an emerging explosive that may replace the currently used explosives such as RDX and HMX, but little is known about its fate in soil. The present study was conducted to determine degradation products of CL-20 in two sandy soils under abiotic and biotic anaerobic conditions. Biotic degradation was prevalent in the slightly acidic VT soil, which contained a greater organic C content, while the slightly alkaline SAC soil favored hydrolysis. CL-20 degradation was accompanied by the formation of formate, glyoxal, nitrite, ammonium, and nitrous oxide. Biotic degradation of CL-20 occurred through the formation of its denitrohydrogenated derivative (m/z 393 Da) while hydrolysis occurred through the formation of a ring cleavage product (m/z 156 Da) that was tentatively identified as CH₂N-C(N-NO₂)-CHN-CHO or its isomer N(NO₂)CH-CHN-CO-CHNH. Due to their chemical specificity, these two intermediates may be considered as markers of in situ attenuation of CL-20 in soil.     

Lung cancer mortality and exposure to atmospheric aerosol particles in Guangzhou,China

In recent years, China and other emerging countries have been experiencing severe air pollution problems with high concentrations of atmospheric aerosol particles. Satellite measurements indicate that the aerosol loading of the atmosphere in highly populated regions of China is about 10 times higher than, for example, in Europe and in the Eastern United States. The exposure to extremely high aerosol concentrations might lead to important human health effects, including respiratory and cardiovascular diseases as well as lung cancers. Here, we analyze 52-year historical surface measurements of haze data in the Chinese city of Guangzhou, and show that the dramatic increase in the occurrence of air pollution events between 1954 and 2006 has been followed by a large enhancement in the incidence of lung cancer.     

Halogenated acetaldehydes: analysis, stability and fate in drinking water

In our previous studies, chloral hydrate has been the only chlorinated acetaldehyde determined in drinking water because authentic standards of other related haloacetaldehydes were not available. Recently, standards of dichloroacetaldehyde, bromochloroacetaldehyde, dibromoacetaldehyde, bromodichloroacetaldehyde, chlorodibromoacetaldehyde, and tribromoacetaldehyde have become available commercially. They were obtained and verified for purity and stability using a dual-column GC-ECD system. Each commercial standard was found to contain small amounts of the other target haloacetaldehydes (HAs). The stability of the HAs stock solutions was solvent dependent: in acetone, the brominated species partially degraded to bromoacetone, while all target HAs were stable in MTBE for up to 8 months. The analytical parameters, required for the quantification of HAs in water, were determined and used to evaluate the stability of the HAs in water. Under the conditions of the sampling protocol (field pH adjustment to pH 4.5 and storage at 4 degrees C), the target HAs were stable in water for up to 14 days. However, at typical drinking water pH and temperature conditions, the stability varied with the HA species, pH, temperature and storage period. The trihalogenated acetaldehydes degraded, in part, to their corresponding trihalomethanes (THMs) at increasing pH and temperature. Most target HAs were detected in drinking water samples collected from various Canadian drinking water systems, and the speciation was dependent on water parameters (e.g. bromide concentration) and treatment processes. From the water samples analysed, chloral hydrate ranged between 7% and 51% of the total HAs (w/w). The weigh ratio of total HAs to total THMs (10-46%) indicated that HAs contributed significantly to the pool of DBPs in drinking water.     

A schematic sampling protocol for contaminant monitoring in raptors

Birds of prey, owls and falcons are widely used as sentinel species in raptor biomonitoring programmes. A major current challenge is to facilitate large-scale biomonitoring by coordinating contaminant monitoring activities and by building capacity across countries. This requires sharing, dissemination and adoption of best practices addressed by the Networking Programme Research and Monitoring for and with Raptors in Europe (EURAPMON) and now being advanced by the ongoing international COST Action European Raptor Biomonitoring Facility. The present perspective introduces a schematic sampling protocol for contaminant monitoring in raptors. We provide guidance on sample collection with a view to increasing sampling capacity across countries, ensuring appropriate quality of samples and facilitating harmonization of procedures to maximize the reliability, comparability and interoperability of data. The here presented protocol can be used by professionals and volunteers as a standard guide to ensure harmonised sampling methods for contaminant monitoring in raptors.Electronic supplementary materialThe online version of this article (10.1007/s13280-020-01341-9) contains supplementary material, which is available to authorized users.     

A transformative mission for prioritising nature in Australian cities

Australia is experiencing mounting pressures related to processes of urbanisation, biodiversity loss and climate change felt at large in cities. At the same time, it is cities that can take the leading role in pioneering approaches and solutions to respond to those coupling emergencies. In this perspective piece we respond to the following question: What are the required transformations for prioritising, valuing, maintaining and embracing nature in cities in Australia? We adopt the mission framework as an organising framework to present proposed pathways to transform Australian cities as nature-positive places of the future. We propose three interconnected pathways as starting actions to steer urban planning, policy and governance in Australian cities: First, cities need to establish evidence-based planning for nature in cities and mainstream new planning tools that safeguard and foreground urban nature. Second, collaborative planning needs to become a standard practice in cities and inclusive governance for nature in cities needs to prioritise Aboriginal knowledge systems and practices as well as look beyond what local governments can do. Third, for progressing to nature-positive cities, it is paramount to empower communities to innovate with nature across Australian cities. Whilst we focus on Australian cities, the lessons and pathways are broadly applicably globally and can inspire science-policy debates for the post COP15 biodiversity and COP26 climate change implementation processes.     

Weighted road density: A simple way of assigning traffic-related air pollution exposure

BackgroundExisting traffic variables used for predicting NO₂ in epidemiological studies are either difficult to acquire or explain only a small proportion of the variance. The purpose of this study was to develop and validate a new predictor, weighted road density, which combines the maximum amount of information related to traffic into a single variable without the requirement of obtaining traffic counts for a given area.MethodTwo week NO₂ samples were collected using the readings of up to 32 passive samplers on 3 separate rounds between September and December 2006 and again in 2007. Several types of traffic related explanatory variables based on traffic counts, distance to main road and the proposed weighted road density were constructed using GIS software, and tested for association with the NO₂ samplers. Assessment of the best model was based on R² values, as well as leave-one-out cross validation.ResultsThe weighted road density variable and the density variable based on traffic counts resulted in a similar R² (0.59) for predicting NO₂, although weighted road density was much easier to construct and outperformed other variables such as distance to main road.ConclusionAs well as being a powerful predictor for use in a land use regression model, weighted road density can be used as a proxy for exposure to traffic-related pollution, for use in circumstances where direct measurements of pollutant levels are not feasible or are not required.     

Late 20th century mangrove encroachment in the coastal Australian monsoon tropics parallels the regional increase in woody biomass

In Kakadu National Park, a World Heritage property in the Australian monsoon tropics 250 km to the east of Darwin, a number of recent studies have shown that woody encroachment (expansion of woody communities) and densification (increased biomass in woody communities) has occurred in the last 40 years. The cause of this increase in woody biomass is poorly understood, but possibly associated with the control of invasive Asian water buffalo, trend to higher rainfall, and increased frequency of fires. Mangroves provide an important context to understand these landscape changes, given that they are unaffected by fire or feral water buffalo. We examine change in mangrove distribution in a series of coastal tropical swamps fringing Darwin, Northern Territory, Australia over a 30-year period using a series of 7 aerial photographs spanning 23 years from 1974 and a 2004 high-resolution satellite image. In late 1974, Darwin was impacted by an intense tropical cyclone. Vegetation at 3,000 randomly placed points was manually classified, and a multinomial logistic model was used to asses the impact of landscape position (coastal, intertidal, and upper-tidal) and swamp on mangrove change between 1974 and 2004. Over the study period, there was instability and slight mangrove loss at the coast, stability in the intertidal zone, and mangrove gain in the upper-tidal zone, with an overall increase in mangrove presence of 16.2% above the pre-cyclone distribution. A swamp that was impacted by drainage works for mosquito control and the construction of a sewage treatment plant showed a greater mangrove increase than the two unmodified swamps. The mangrove expansion is consistent with woody encroachment observed in nearby but ecologically distinct systems. Plausible causes for this change include changed local hydrology, changes in sea level, and elevated atmospheric CO₂ concentrations.     

Effect of topography on nitrous oxide emissions from winter wheat fields in Central France

We assessed nitrous oxide (N₂O) emissions at shoulder and foot-slope positions along three sloping sites (1.6–2.1%) to identify the factors controlling the spatial variations in emissions. The three sites received same amounts of total nitrogen (N) input at 170 kg N ha⁻¹. Results showed that landscape positions had a significant, but not consistent effect on N₂O fluxes with larger emission in the foot-slope at only one of the three sites. The effect of soil inorganic N (NH₄⁺ + NO₃⁻) contents on N₂O fluxes (r² = 0.55, p < 0.001) was influenced by water-filled pore space (WFPS). Soil N₂O fluxes were related to inorganic N at WFPS > 60% (r² = 0.81, p < 0.001), and NH₄⁺ contents at WFPS < 60% (r² = 0.40, p < 0.01), respectively. Differences in WFPS between shoulder and foot-slope correlated linearly with differences in N₂O fluxes (r² = 0.45, p < 0.001). We conclude that spatial variations in N₂O emission were regulated by the influence of hydrological processes on soil aeration intensity.     

Dietary exposure to dioxin-like compounds in three age groups: results from the Flemish environment and health study

Lipophilic contaminants are present in the environment and bioaccumulate in the food chain. Therefore, their intake via animal fat of various sources was assessed for three age groups of the Flemish population, participating in a large biomonitoring program of the Flemish government. In total, 1636 adolescents (14-15 years), 1186 mothers (18-44 years), and 1586 adults (50-65 years) participated in the study and completed a semi quantitative food frequency questionnaire. Individual consumption data were combined, via a so-called simple distribution approach, with recent data on polychlorinated dibenzo-p-dioxins/furans and dioxin-like polychlorinated biphenyls, measured via the chemical-activated luciferase gene expression (CALUX) bio-assay in food items available on the Flemish market. The median (95th percentile) estimated intakes of dioxin-like contaminants were 2.24 (4.61), 2.09 (4.26), and 1.74 (3.53) pg CALUX-TEQ kg(-1) bw d(-1) for, respectively adolescents, mothers and adults. These data are in the same range as those found in other European studies. The CALUX-TEQ results of respectively 59.8%, 53.7% and 36.2% of the adolescent, mother and adult population exceed the tolerable weekly intake (TWI) of 14 pg WHO-TEQ kg(-1) bw w(-1), as derived by the Scientific Committee on Food [Scientific Committee on Food, 2001. Opinion of the Scientific Committee on Food on the Risk Assessment of Dioxins and Dioxin-like PCBs in Food, CS/CNTM/DIOXIN/20 final Brussels, Belgium]. The main contributors of dioxin-like substances are fish and seafood (25-43% of the total intake), added fats (22-25% of the total intake) and dairy products (17-20% of the total intake).     

Thermogravimetric desorption and de novo tests I: method development and validation

Thermogravimetric analysis (TGA) has been combined with evolved gas analysis (EGA) with the purpose of simulating the thermal behaviour of filter dust samples under inert (desorption) and de novo test oxidising conditions. Emphasis is on studying de novo formation of dioxins, surrogates and precursors arising from filter dust derived from thermal processes, such as municipal solid waste incineration and metallurgy. A new method is tested for sampling and analysing dioxin surrogates and precursors in the TGA effluent, which are collected on sampling tubes; the adsorbed compounds are eventually desorbed and quantified by TD-GC-MS. The major sources of error and losses are considered, including potential sorbent artefacts, possible breakthrough of volatiles through sampling tubes, or eventual losses of semi-volatiles due to their incomplete desorption or re-condensation inside the TG Analyser. The method is optimised and validated for di- to hexa-chlorinated benzenes in a range of 10-1000ppb with average recovery exceeding 85%. The results are compared with data obtained in similar studies, performed by other research groups. As a result, the method provides the means for simulating de novo synthesis of dioxins in fly-ash and facilitates reliable and easy estimation of de novo activity, comparable with results of other studies, in combination with wide flexibility of testing conditions.