Effect of incineration on the removal of key offensive odorants released from a landfill leachate treatment station (LLTS)

As a basic means to control odorants released from a landfill leachate treatment station (LLTS), effluents venting from this station were treated via incineration with methane rich landfill gas (at 750 °C). A list of the key offensive odorants covering 22 chemicals was measured by collecting those gas samples both before and after the treatment. Upon incineration, the concentration levels of most odorants decreased drastically below threshold levels. The sum of odorant intensities (SOIs), if compared between before and after incineration, decreased from 6.94 (intolerable level) to 3.45 (distinct level). The results indicate that the thermal incineration method can be used as a highly efficient tool to remove most common odorants (e.g., reduced sulfur species), while it is not so for certain volatile species (e.g., carbonyls, fatty acids, etc.).     

Enzymatic and microbial transformation assays for the evaluation of the environmental fate of diclofenac and its metabolites

Diclofenac has been of environmental concern due to the potential harmful effects on non-target organisms at environmentally relevant concentrations. In this study, we evaluated the transformation kinetics of diclofenac and its two major metabolites in two laboratory-scale experiments: the transformation of diclofenac in the presence of rat liver S9 fraction with co-factors, and the transformation of diclofenac, 4′-hydroxy-diclofenac and diclofenac β-O-acyl glucuronide in the inoculum used for the OECD 301C ready-biodegradability test. 4′-Hydroxy-diclofenac was identified as the major phase I metabolite and diclofenac β-O-acyl glucuronide was identified as the major phase II metabolite in the S9 assay. Transformation of diclofenac in the microbial degradation test did not occur significantly for 28 d, whereas 4′-hydroxy-diclofenac degraded slowly, indicating that the biological removal of diclofenac is not likely to occur in conventional STPs unless sorptive removal is significant. However, diclofenac β-O-acyl glucuronide deconjugated to form equimolar diclofenac within 7 d, in the microbial degradation test. The mixture of diclofenac and its two metabolites, formed after incubating diclofenac in S9 medium for 2 h, was spiked in the inoculum to link both assays. The concentrations of diclofenac and its metabolites, measured over time, agreed well with predicted values, using rate parameters obtained from independent experiments. The results show that phase II metabolites generated in mammals may deconjugate easily in conventional STPs to form a parent compound and that these processes should be considered during the environmental monitoring and risk assessment of diclofenac.     

Solubility of organic acids in various methanol and salt concentrations: the implication on organic acid sorption in a cosolvent system

The well-known cosolvency-induced sorption model is not applicable to predict the sorption of carboxylic acids in cosolvent system. To investigate the phenomenon, sorption and solubility of chlorinated phenols (2,4-dichlorophenol (2,4-DCP) and 2,4,6-trichlorophenol (2,4,6-TCP)) and carboxylic acids (benzoic acid and 2,4-dichlorophenoxyacetic acid (2,4-D)) were measured in soil-methanol mixture with various ionic strengths. The sorption (K_m) of chlorinated phenols was explained by a cosolvency-induced sorption model; the inverse log-linear relationship between the K_m and methanol volume fraction (f_c). However, the K_m of carboxylic acids increased with increasing f_c. This discrepancy was attributed to the effect of the carboxylic moiety. To explain the effect, solubility was measured for benzoic acid and 2,4,6-TCP from various liquid conditions. For both solutes, the cosolvency power (σ) increased with CaCl₂ concentrations and the salting constant (K^s) became smaller as f_c increased. However, the σ value at a given salt concentration and the K^s value at a given f_c were greater for 2,4,6-TCP than for benzoic acid, both of which were due to the greater hydrophobicity of the former. Overall, the solubility profiles of the both solutes on combination of f_c and CaCl₂ concentration evidenced no specific role of the carboxylic moiety. Therefore, it can be reasonably concluded that the positive relationship between K_m and f_c for carboxylic organic acid can be attributed to the modification of the activity coefficient occurred in the solid phase, which cannot be traceable by cosolvency-based model.     

Effect of chronic exposure to acetaminophen and lincomycin on Japanese medaka (Oryzias latipes) and freshwater cladocerans Daphnia magna and Moina macrocopa, and potential mechanisms of endocrine disruption

Chronic toxicity of acetaminophen and lincomycin were evaluated using freshwater organisms including two crustaceans (Daphnia magna and Moina macrocopa) and a fish (Oryzias latipes). H295R, a human adrenal cell was also used to understand the effects on steroidogenesis. In 21 d D. magna exposure, survival NOEC was found at 5.72 mg L⁻¹ and no reproduction related effects were noted at this level of exposure to acetaminophen, while 21 d survival or growth effects were not observed even at the highest exposure levels (153 mg L⁻¹) for lincomycin. In the chronic fish toxicity test, significant reduction in juvenile survival was observed at 30 d post-hatch (dph) at 95 mg L⁻¹ of acetaminophen, and 0.42 mg L⁻¹ of lincomycin. After the exposure to both pharmaceuticals, vitellogenin levels tended to increase in male fish at 90 dph. In the eggs which were prenatally exposed to 9.5 mg L⁻¹ of acetaminophen, reduced hatchability was observed. The results of H295R cell assay showed that both pharmaceuticals could alter steroidogenic pathway and increase estrogenicity. Endocrine disruption potentials and their ecological implication may deserve further studies. Our observations suggest however that ecological risks of both pharmaceuticals are negligible at the concentrations currently found in the environment.     

Effect of seepage conditions on chemical attenuation of arsenic by soils across an abandoned mine site

The effect of seepage velocity on the As leaching/adsorption by soils collected from abandoned mine sites was evaluated under batch equilibrium and different seepage settings. The breakthrough curves (BTCs) of As leaching from the mine soil column initially displayed the peak export and gradually leveled off over the leaching experiment. A similar As peak was observed after a flow interruption period. Adsorption by downgradient soils was clearly nonlinear, as Freundlich N was <1. In the BTCs of the layered columns, where downgradient soils were overloaded above the mine soil, the extended lag period of As appearance and lower steady-state As concentration observed for slow seepage velocity supported the idea of kinetically limited As attenuation driven by soil adsorption. The perturbation of As concentration was insignificant when the intra-column As concentration gradient was higher. The As concentration drop and time to recovery were greater for less adsorptive soil and fast seepage velocity. Desorption of As from soils retrieved from both batch adsorption and column experiment demonstrate hysteric behavior. The results of this work demonstrated that the risk of As leaching from an abandoned mine site can be greatly attenuated by intermediate downgradient soils via chemical adsorption, which tends to be kinetically limited and energetically hysteric (i.e., non-identical energy pathway).     

Assays of dioxins and dioxin-like compounds in actually contaminated soils using transgenic tobacco plants carrying a recombinant mouse aryl hydrocarbon receptor-mediated β-glucuronidase reporter gene expression system

The transgenic tobacco plant XD4V-26 carrying the recombinant mouse aryl hydrocarbon receptor XD4V-mediated β-glucuronidase (GUS) reporter gene expression system was used for assay of dioxins and dioxin-like compounds consisting of polychlorodibenzo-p-dioxins, polychlorinated dibenzofurans, and coplanar polychlorinated biphenyls (Co-PCBs) in actually contaminated soils. The transgenic tobacco plant XD4V-26 showed a significant dose-dependent induced GUS activity when cultured on MS medium containing PCB126 [toxic equivalency factor (TEF) = 0.1]. In contrast, PCB169 and PCB180, which have 0.03 of TEF and unassigned TEF values, respectively, did not significantly induce GUS activity under the same conditions as with PCB126. When the tobacco plants were cultivated for up to 5 weeks on actually contaminated soils with dioxins and dioxin-like compounds collected from the periphery of an incinerator used for disposal of life and industrial wastes, GUS activity in the leaves was dose-dependently increased. The plants clearly detected 360 pg-TEQ g(-1) of dioxins and dioxin-like compounds in this assay. There was a positive correlation between GUS activity and TEQ value of dioxins and dioxin-like compounds in the plants. This assay does not require any extraction and purification processes for the actually contaminated soil samples.     

Feasibility study on cross-linked biopolymeric concrete encapsulating selenium glass wastes

Feasibility study was conducted to encapsulate the selenium (Se) contained in glass waste, using the biopolymer-modified concrete. Biopolymer has unique characteristics to provide the chemical sites to metals or toxic compounds through the three-dimensional cross-linked structure. Very minute amount of biopolymer enhanced the characteristics of cementitious material. The resulting biopolymeric composite with selenium glass waste showed 20% higher compressive strength than ordinary concrete and the lower leaching concentration than the equipment detection limit. For a qualitative measurement, X-ray diffraction (XRD; X-ray powder diffractogram) was used to characterize the biopolymeric concrete. The optimum waste content percentage with appropriate biopolymer concrete mixture ratio was identified for its possible commercial use.     

Integration of a nonmetallic electrostatic precipitator and a wet scrubber for improved removal of particles and corrosive gas cleaning in semiconductor manufacturing industries

To remove particles in corrosive gases generated by semiconductor industries, we have developed a novel non-metallic, two-stage electrostatic precipitator (ESP). Carbon brush electrodes and grounded carbon fiber-reinforced polymer (CFRP) form the ionization stage, and polyvinyl chloride collection plates are used in the collection stage of the ESP The collection performance of the ESP downstream of a wet scrubber was evaluated with KC1, silica, and mist particles (0.01-10 pm), changing design and operation parameters such as the ESP length, voltage, and flow rate. A long-term and regeneration performance (12-hr) test was conducted at the maximum operation conditions of the scrubber and ESP and the performance was then demonstrated for 1 month with exhaust gases from wet scrubbers at the rooftop of a semiconductor manufacturing plant in Korea. The results showed that the electrical and collection performance of the ESP (16 channels, 400x400 mm2) was maintained with different grounded plate materials (stainless steel and CFRP) and different lengths of the ionization stage. The collection efficiency of the ESP at high air velocity was enhanced with increases in applied voltages and collection plate lengths. The ESP (16 channels with 100 mm length, 400x400 mm2x540 mm with a 10-mm gap) removed more than 90% of silica and mistparticles with 10 and 12 kV applied to the ESPat the air velocity of 2 m/s and liquid-to-gas ratio of 3.6 L/m3. Decreased performance after 13 hours ofcontinuous operation was recovered to the initial performance level by 5 min of water washing. Moreover during the 1-month operation at the demonstration site, the ESP showed average collection efficiencies of 97% based on particle number and 92% based on total particle mass, which were achieved with a much smaller specific corona power of 0.28 W/m3/hr compared with conventional ESPs.     

Application of a weights-of-evidence method and GIS to regional groundwater productivity potential mapping

The aim of this study is to analyze the relationship among groundwater productivity data including specific capacity (SPC) and transmissivity (T) as well as its related hydrogeological factors in a bedrock aquifer, and subsequently, to produce the regional groundwater productivity potential (GPP) map for the area around Pohang City, Korea using a geographic information system (GIS) and a weights-of-evidence (WOE) model. All of the related factors, including topography, lineament, geology, forest, and soil data were collected and input into a spatial database. In addition, SPC and T data were collected from 83 and 81 well locations, respectively. Four dependent variables including SPC values of ≥6.25 m3/d/m (Case 1) and T values of ≥3.79 m2/d (Case 3) corresponding to a yield (Y) of ≥500 m3/d, and SPC values of ≥3.75 m3/d/m (Case 2) and T values of ≥2.61 m2/d (Case 4) corresponding to a Y of ≥300 m3/d were also input into a spatial database. The SPC and T data were randomly selected in an approximately 70:30 ratio to train and validate the WOE model. Tests of conditional independence were performed for the used factors. To assess the regional GPP for each dependent variable, W+ and W- of each factor's rating were overlaid spatially. The results of the analysis were validated using area under curve (AUC) analysis with the existing SPC and T data that were not used for the training of the model. The AUC of Cases 1, 2, 3 and 4 showed 0.7120, 0.6893, 0.6920, and 0.7098, respectively. In the case of the dependent variables, Case 1 had an accuracy of 71.20% (AUC: 0.7120), which is the best result produced in this analysis. Such information and the maps generated from it could be used for groundwater management, a practice related to groundwater resource exploration.