24 h diffusive sampling of toxic VOCs in air onto Carbopack X solid adsorbent followed by thermal desorption/GC/MS analysis-laboratory studies

Diffusive sampling of a mixture of 42 volatile organic compounds (VOCs) in humidified, purified air onto the solid adsorbent Carbopack X was evaluated under controlled laboratory conditions. The evaluation included variations in sample air temperature, relative humidity and ozone concentration. Linearity of samples with loading was examined both for a constant concentration with time varied up to 24 h and for different concentrations over 24 h. Reverse diffusion and its increase with accumulation of sample were determined for all compounds. Tubes were examined for blank levels, change of blanks with storage time, and variability of blanks. Method detection limits were determined based on seven replicate samples. Based on this evaluation, 27 VOCs were selected for quantitative monitoring in the concentration range from approximately 0.1 to 4 ppbv. Comparison results of active and diffusive samples taken over 24 h and under the same simulated ambient conditions at a constant 2 ppbv were interpreted to estimate the effective diffusive sampling rates (ml min(-1)) and their uncertainties and to calculate the corresponding diffusive uptake rates (ng ppmv(-1) min(-1)).     

Using Aerial Video to Train the Supervised Classification of Landsat Tm Imagery for Coral Reef Habitats Mapping

Management of coral reef resources is a challenging task, in many cases, because of the scarcity or inexistence of accurate sources of information and maps. Remote sensing is a not intrusive, but powerful tool, which has been successfully used for the assessment and mapping of natural resources in coral reef areas. In this study we utilized GIS to combine Landsat TM imagery, aerial photography, aerial video and a digital bathymetric model, to assess and to map submerged habitats for Alacranes reef, Yucatán, México. Our main goal was testing the potential of aerial video as the source of data to produce training areas for the supervised classification of Landsat TM imagery. Submerged habitats were ecologically characterized by using a hierarchical classification of field data. Habitats were identified on an overlaid image, consisting of the three types of remote sensing products and the bathymetric model. Pixels representing those habitats were selected as training areas by using GIS tools. Training areas were used to classify the Landsat TM bands 1, 2 and 3 and the bathymetric model by using a maximum likelihood algorithm. The resulting thematic map was compared against field data classification to improve habitats definition. Contextual editing and reclassification were used to obtain the final thematic map with an overall accuracy of 77%. Analysis of aerial video by a specialist in coral reef ecology was found to be a suitable source of information to produce training areas for the supervised classification of Landsat TM imagery in coral reefs at a coarse scale.     

Exposure and inhalation risk assessment in an aluminium cast-house

To date the exposure, absorption and respiratory health effects of cast-house workers have not been described since most studies performed in the aluminium industry are focused on exposure and health effects of potroom personnel. In the present study, we assessed the external exposure and the absorbed dose of metals in personnel from the aluminium cast house. This was combined with an evaluation of respiratory complaints and the lung function of the personnel. 30 workers from an aluminium casting plant participated and 17 individuals of the packaging and distribution departments were selected as controls. The exposure was assessed by the quantification of total inhalable fume with metal fraction and by the determination of urinary aluminium, chromium, beryllium, manganese and lead concentration. Carbon monoxide (CO), carbon dioxide (CO2), aldehydes and polyaromatic hydrocarbons and man-made mineral fibres concentration were assessed as well. In order to evaluate their respiratory status each participant filled out a questionnaire and their lung function was tested by forced spirometry. Total inhalable fume exposure was maximum 4.37 mg m(-3). Exposure to the combustion gases, man-made mineral fibres and metal fume was well below the exposure limits. Beryllium could not be detected in the urine. The values of aluminium, manganese and lead in the urine were all under the respective reference value. One individual had a urinary chromium excretion above the ACGIH defined biological exposure index (BEI) of 30 microg g(-1) creatinine. There was no significant difference in any of the categories of the respiratory questionnaire and in the results of the spirometry between cast house personnel and referents (Chi-square, all p > 0.05). Exposure in cast houses seem to be acceptable under these conditions. However, peak exposure to fumes cannot be excluded and the potential risk of chromium and beryllium exposure due to the recycling of aluminium requires further attention.     

Spatial contaminant heterogeneity: quantification with scale of measurement at contrasting sites

Material within the terrestrial environment is rarely homogeneously distributed, either spatially or temporally. One consequence of heterogeneity is that uncertainty is usually generated in measurements that are taken with the aim of characterising the environment. For example, a measurement of analyte concentration within soil taken from one sampling location on contaminated land can vary substantially when compared against another sample taken at effectively the same nominal location. The measurement uncertainty arising from the heterogeneity can substantially limit the reliability of the interpretations made upon environmental investigations. The sampling uncertainty usually outweighs the analytical uncertainty from the laboratory, often by a factor of 20 or more. One approach to reducing the uncertainty is to design a more suitable sampling strategy. This might be achieved by predicting the degree of heterogeneity prior to the investigation, but this is often difficult to achieve accurately. Another approach, which was investigated here, is to actually characterise the heterogeneity prior to the main investigation using rapid and inexpensive technology, such as in situ measurement techniques. In situ portable X-ray fluorescence (PXRF) and X-ray microprobe (XMP) techniques were employed to test the feasibility of this approach. Two contrasting contaminated land sites were chosen to characterise the two-dimensional spatial heterogeneity of heavy metal contamination in topsoil at a range of scales (50 m to 0.001 m). The spatial heterogeneity of contaminants, expressed as relative standard deviations, was found to differ between the two sites by a factor of two, largely due to the mode of deposition of pollution. The study also indicated that the heterogeneity did not change systematically with the scale of measurement between sampling locations at either site.     

镉胁迫下大豆中镉的分布状况及其籽粒品质

溶液培养中0.5μmol·L-1镉胁迫浓度下,大豆表现出轻微受害症状,籽粒减产25 . 7%,而籽粒中粗脂肪和粗蛋白含量变化不大.镉在大豆中的积累分布状况为根>叶>籽>油,比例为32.100:1.690:1.000:0.003.大豆籽粒含镉4.89mg/kg,超过了国家环境标准规定的最高容许量.而大豆粗脂肪中含镉仅0.015mg/kg,远低于国家食品环境卫生标准.豆粕中含镉6.17mg/kg,表明大豆籽粒中的镉主要存在于粗蛋白和淀粉中.     

废水中甲苯的臭氧氧化动力学的研究

采用臭氧氧化降解含甲苯的废水,实验研究了在温度为298K时,不同pH值、反应物的初始浓度对甲苯降解反应过程及其动力学的影响,初步探讨了甲苯液相臭氧氧化降解过程机理。      

Rapid prediction of disinfection by-product formation potential by fluorescence

Recent drinking water regulations have lowered the disinfection by-product standards as well as added new disinfection by-products for regulation. Natural organic matter (NOM) plays a major role in the formation of undesirable organic by-products following disinfection/oxidation of drinking water. It is suspected that most precursors to disinfection by-products are humic, although nonhumic substances are also suspected of contributing to these by-products. Many of the disinfection by-products have adverse health effects in humans (i.e., carcinogenic or mutagenic effects). The primary chlorinated disinfection by-products of concern include trihalomethanes, haloacetic acids, and haloacetonitrile. Fluorescence spectroscopy was used to study humic and fulvic acids. The two fractions of humic substances, humic and fulvic acids, were characterized by a double-peak phenomena in an overlapping fluorescing region. Disinfection by-product formation potentials of humic and fulvic acids have been correlated with total organic carbon, UV absorbance at 254 nm, specific absorbance and fluorescence. River humic and fulvic acid was found to have the highest reactivity to disinfection by-product formation as compared to soil and peat humic and fulvic acid. Fluorescence spectroscopy has shown to be a rapid and predictive tool for disinfection by-products formation potential of humic and fulvic acids.     

A new type of infrared organ in the Australian "fire-beetle" Merimna atrata (Coleoptera: Buprestidae)

 The Australian buprestid beetle Merimna atrata (Coleoptera: Buprestidae) approaches forest fires because its larvae develop in freshly burnt wood. So far nothing is known about possible sensory systems enabling the beetles to detect fires and to cope with the thermal environment close to the flames. We found that M. atrata has two pairs of infrared (IR) organs on the ventrolateral sides of the abdomen. Each IR organ consists of a specialized IR-absorbing area which is innervated by one thermosensitive multipolar neuron. The primary dendritic branches ramify into more than 800 closely packed terminal endings which contain a large number of mitochondria. We called the special morphology of the dendritic region a terminal dendritic mass. The type of IR receptor found in M. atrata is unique in insects and can best be compared with the IR organs of boid snakes. Received: 14 August 2000 / Accepted in revised form: 18 October 2000     

First observation of different diffusion coefficients for two conformers in a neat liquid

 Self-diffusion coefficients were studied for the highly polar liquid N-methylformamide at pressures up to 200 MPa between the melting pressure curves and 420 K by the spin-echo method. N-Methylformamide exists as a mixture of two conformers in the neat liquid. These conformers have large differences at lower temperatures in their dynamic and structural properties. The self-diffusion coefficient of the cis-conformer being 17% lower than that of the trans-conformer at the same T and p. This is the first observation of such an effect. The experimental study is supported by Monte Carlo (MC) calculations which show that the first neighbors around a cis conformer are arranged differently than in an all trans liquid. The difference leads in the simulations to a much lower dielectric constant for the trans-cis mixture and might also explain the retardation of diffusion for the cis conformer. Received: 15 November 1999 / Accepted in revised form: 28 February 2000