Heat wave vulnerability and exposure mapping for Osaka City,Japan

Heat waves and heat-related stresses are increasing environmental concerns in urban areas. The impact of heat waves is dependent on the intensity and duration of each event and on underlying environmental and socio-demographic factors which influence population vulnerability. In order to develop effective adaptation strategies, it is important to develop a method to clearly identify the most vulnerable areas based on these factors. The purpose of this study is to develop and map a heat wave vulnerability index combined with heat exposure analysis to identify areas where interventions can be targeted. The vulnerability index was derived from a principle component analysis of eight key variables that influence heat wave vulnerability. Eight proxy measures of vulnerability were obtained from 2010 census and land-use data for the 1904 census districts of Osaka City. Three principle components explained >77 % of the variance (age, employment and education; social isolation; density and lack of green space). The components were combined and weighted to produce a vulnerability score for each census district. The vulnerability scores ranged from 0 to 106, were categorised into eight vulnerability levels and were overlaid with fine-scale air temperature observations. The resulting output identified the distribution of population vulnerability and exposure. This assessment of vulnerability, combining exposure and sensitivity components, can provide precedent for efficient, targeted action to be taken to reduce the impact of heat waves at present and under climate change.     

Responding to a policy mandate to collaborate: structuring collaboration in the collaborative forest landscape restoration program

The Collaborative Forest Landscape Restoration Program (CFLRP) aims to expand the pace and scale of forest restoration on national forests in the United States. The program requires candidate projects to develop landscape-scale forest restoration proposals through a collaborative process and continue to collaborate throughout planning, implementation, and monitoring. Our comparative case analysis of the initial selected projects examines how existing collaborative groups draw on past experience of collaboration and the requirements of a new mandate to shape collaborative structures as they undertake CFLRP work. While mandating collaboration appears contrary to what is often defined as an informal and emergent process, mandates can encourage stakeholder engagement and renew commitment to overcome past conflict. Our findings also suggest that a collaborative mandate can lead to increased attention and scrutiny, prompting adjustments to collaborative process and structure. As such, mandating collaboration creates dynamic tensions between past experience and new requirements for collaborative practice.     

Traps in and of our minds: relationships between human logic,dialectical traps and social-ecological traps

Social-ecological traps are theorized to be present when human actions affect feedbacks and drivers in social-ecological systems, which, in turn, lead to regime shifts that may alter ecosystem capacity to generate services on which human wellbeing depends, and this, in turn, triggers societal responses, where actors and institutions interact with ecological dynamics and unwittingly lock development into a vulnerable pathway. The key dynamic in this theorization seems to be that human action often predicates or initiates the series of cascading affects that determine the presence of, and, perhaps, the effectiveness of, social-ecological traps. However, what drives human action in this context? What logic, assumptions, decisions, world views, and other processes are implicated in this configuration? This paper first briefly reviews ecological identity and the problems of anthropocentricism, human exceptionalism, and human exemptionalism and introduces the term ecological disenfranchisement. Building upon this, the author invokes Horn’s logic and dialectical traps as a lens for understanding human roles and the prevalence of issues with ecological identities, within social ecological traps. Drilling further down, the paper illustrates these traps with short vignettes, in each case, attempting to link the human logical traps with larger system dynamics. Finally, the author proposes a chain of reasoning to serve as an example of how the presence of human logic traps (or entrapment) in a number of different spheres has an impact upon the larger system, and, perhaps, even predicts entrapment of the larger system. Future efforts to either understand social-ecological traps or navigate away or out of them must first take stock of the human logical traps that actors within the systems are influenced by, and that influence the large system(s).This paper argues that failing to account for human traps within will render most efforts to avoid or escape social-ecological traps futile.     

Comparative study on effect of blending,thermal barrier coating (LHR) and injector nozzle geometry on biodiesel-fuelled engines

Increased petroleum prices, increased threat to the environment from exhaust emissions and global warming have generated intense international interest in developing renewable and alternative non-petroleum fuels for internal combustion engines. Evolving suitable technology for addressing energy crisis creates a continued investigation into the search for sustainable and clean-burning renewable fuels. This work investigates suitability of different non-edible-derived biodiesels such as cotton seed oil methyl ester (COME), Honne oil methyl ester (HnOME) and Rubber seed oil methyl ester (RuOME) to four stroke, single cylinder compression ignition (CI) engine. Engine tests were conducted to study the effect of fuel blending, thermal barrier coating (TBC) or Low Heat Rejection (LHR) and injector nozzle geometry on the performance, combustion and emission characteristics of COME, HnOME and RuOME in the modified CI engine. Blends of biodiesels with diesel were varied from 20 to 80% in steps of 20%. Two thermal barrier coatings of partially stabilized zirconium (PSZ) and aluminium oxide (Al₂O₃) were provided on the engine to make it fully adiabatic. Nozzle injectors of 3, 4 and 5 holes, with size of orifice varied from 0.2 to 0.3 mm size were selected for the study. It was concluded that B20 biodiesel blend, PSZ-coated engine and four hole nozzle injector of 0.2 mm size resulted in overall better engine performance with increased brake thermal efficiency (BTE) and reduced HC, CO, smoke emissions for the fuel combinations tested. Combustion analysis to study the effect of biodiesel blends, LHR coatings, injector nozzle geometry on the performance of the biodiesel-fuelled engine has been presented to give more insight into the behaviour of operation.     

Selection of palm oil mill effluent treatment for biogas generation or compost production using an analytic hierarchy process

Palm oil mill effluent (POME) is the liquid waste from palm oil mills, and is generally treated using open lagoon technology. However, open lagoons can also be combined with more environmentally friendly technologies. In this study, the analytic hierarchy process (AHP) was used to determine the best combination open lagoon of technology (COLT) for POME treatment. The selected criteria were benefit, opportunity, risk, and cost, with sub-criteria further determined based on these criteria. The sub-criteria were revenue, greenhouse gas reduction, employment absorption, corporate social responsibility, co-processing, environmental risk, marketing risk, technology reliability, investment cost, operation and maintenance cost, and opportunity cost. The alternatives were COLT-composting for fertilizer purpose and COLT-biogas for energy generation purpose. Calculation and analysis was performed on questionnaire data using Expert Choice^®. COLT-composting proved to be the superior COLT using tentative performance of alternative in this research, with advantages in benefit, opportunity, and risk. The priority weight for COLT-composting was 0.636. Sensitivity analysis was performed by changing criteria priorities. For COLT-biogas to be considered better than COLT-composting, the cost would need to be weighted more than 0.954.     

Fully Bio-Sourced Nylon 11/Raw Lignin Composites: Thermal and Mechanical Performances

Ecofriendly fully bio-composites based on polyamide 11 (PA11) and lignin have been prepared on the entire concentration range using a twin-screw extruder. In this work, PA11 was blended with lignin by direct extrusion technology without any chemical pre- or in-situ- modifications or physical pretreatments. The presence of various organic and inorganic impurities in the selected technical lignin have been maintained. The incorporation of this cheap renewable material from biomass in bio-based PA11 was inspected by an array of characterization tools. Also, the effect of the presence of lignin on the morphology and on the mechanical properties of the resulting materials was examined. Finally, in-situ investigation of structural evolution in PA11 induced by the presence of lignin was analyzed by Fast Scanning Chip Calorimetry.     

A Solvent-Free Approach for Production of Films from Pectin and Fungal Biomass

Self-binding ability of the pectin molecules was used to produce pectin films using the compression molding technique, as an alternative method to the high energy-demanding and solvent-using casting technique. Moreover, incorporation of fungal biomass and its effects on the properties of the films was studied. Pectin powder plasticized with 30% glycerol was subjected to heat compression molding (120 °C, 1.33 MPa, 10 min) yielding pectin films with tensile strength and elongation at break of 15.7 MPa and 5.5%, respectively. The filamentous fungus Rhizopus oryzae was cultivated using the water-soluble nutrients obtained from citrus waste and yielded a biomass containing 31% proteins and 20% lipids. Comparatively, the same strain was cultivated in a semi-synthetic medium resulting in a biomass with higher protein (60%) and lower lipid content (10%). SEM images showed addition of biomass yielded films with less debris compared to the pectin films. Incorporation of the low protein content biomass up to 15% did not significantly reduce the mechanical strength of the pectin films. In contrast, addition of protein-rich biomass (up to 20%) enhanced the tensile strength of the films (16.1–19.3 MPa). Lastly, the fungal biomass reduced the water vapor permeability of the pectin films.     

Photo-Stabilisation and UV Blocking Efficacy of Coated Macro and Nano-Rutile Titanium Dioxide Particles in Paints and Coatings

Surface treated macro and nanoparticle TiO₂ samples have been prepared, characterised and their efficiency as UV blockers evaluated in clear coatings and paints. The particle size of the ‘base’ TiO₂ has been optimised to block UV radiation and the surface treatment developed to deactivate the photocatalytic activity of the surface of the TiO₂ particles. The resultant UV blockers have been evaluated in both solvent and water-based clear coatings. Nanoparticle TiO₂ has been prepared from ‘seed’ and the particle size was controlled by calcination. It was found that the choice of particle size is a compromise between UVA absorption, UVB absorption, visible transmission and photoactivity. It has been demonstrated that TiO₂ with a crystallite size of 25 nm yields a product with the optimum properties. A range of dispersants was successfully used to disperse and mill the TiO₂. Both organic and inorganic dispersants were used; 2-amino-2-methyl-1-propanol and 1-amino-2-propanol (MIPA) and P₂O₅ and Na₂SiO₃ respectively. The surface of the nano-TiO₂ was coated with mixed oxides of silicon, aluminium, zirconium and phosphorous. Addition of the resultant coated nano-rutiles to an Isocyanate Acrylic clear coating prolonged the lifetime of that coating compared to the blank. Generally, a surface treatment based on SiO₂, Al₂O₃ and P₂O₅ was more successful than one based on ZrO₂, Al₂O₃ and P₂O₅. Higher addition levels of the surface treatment were beneficial for protecting the polymeric coating. The UV blocker products were also evaluated in a water-based acrylic, first a water-based dispersion of the UV blocker was prepared before addition to the acrylic. The dispersions and resultant acrylic thin films were evaluated using UV/Vis spectroscopy and durability assessed. The ratio of absorbance at 300:500 nm for the water-based dispersion was shown to be a good predictor of both the transparency of the resultant acrylic thin film and the durability of that film, in terms of weight loss. Macro grade titanium dioxide pigments were also prepared and coated with treatments of silica, alumina and siloxane and their photo-stabilising activity in alkyd paint film assessed and found to be directly related to the electron–hole pair mobility and trapping as determined by micro-wave spectroscopy.     

Biosynthesis of Poly(3-hydroxybutyrate) from Cheese Whey by <Emphasis Type="Italic">Bacillus megaterium</Emphasis> NCIM 5472

Microbial polyhydroxyalkonate such as homopolyester of poly(3-hydroxybutyrate) (PHB) was produced from cheese whey by Bacillus megaterium NCIM 5472. Due to their numerous potential industrial applications, the focus was given to competently enhance the amount of PHB produced. The amount of PHB produced from whole cheese whey, and ultrafiltered cheese whey was first compared, and after observing a rise in PHB production by using ultrafiltered cheese whey, cheese whey permeate was chosen for further analysis. The presence of PHB was then confirmed by GCMS. Since the main aim of the study was to increase the amount of PHB produced through batch fermentation, various process parameters like time, pH, C/N ratio, etc. were optimized. After optimization, it was found that B. megaterium NCIM 5472 was capable of accumulating 75.5% of PHB of its dry weight and a PHB yield of 8.29 g/L. The chemical structure of the polymer was further analyzed by using FTIR and NMR spectroscopy methods. Also, the physical and thermal properties were studied by using Differential scanning calorimetry and Thermogravimetric analysis. It was found that the polymer produced had excellent thermal stability, thus allowing the possibility to exploit its properties for industrial purposes such as adhesives, packaging materials, etc.