济南市大气颗粒物特征及来源的研究

在济南市区设11个点位,在不同季节采集大气颗粒物,其中五个点位用六级串级式采样器采集飘尘样。样品分析了40多种元素、非金属和有机物,并分析了不同粒径中苯并(a)芘含量。应用富集因子计算并提出富集值大干5(EF>5)为污染富集的论点;摸清了济南大气颗粒物的理化特征及粒径分布规律;用化学质量平衡(CMB_7)法探寻了颗粒物来源。     

黄土高原水土流失治理若干问题的反思

本文通过对黄土高原半个世纪治理的反思 ,认为区域产业结构的调整及城市化水平的迅速提高是解决水土流失加剧及环境恶化的根本。同时 ,文章对小流域综合治理模式进行了总结 ,并提出黄土高原水土流失治理在区域综合发展、机制创新、资金筹措等方面应遵循的原则     

水资源全流域管理模式研究

水资源管理在社会经济发展中具有举足轻重的作用。本文通过分析国外流域管理的先进经验及发展趋势 ,结合我国实际 ,提出水资源全流域统一管理的模式 ,并指出这是我国水资源管理的必由之路     

Joint chemical flushing of soils contaminated with petroleum hydrocarbons

How to increase the efficiency of chemical flushing and decrease the remediation expenses of contaminated soils are two key scientific and technological issues to be solved. Joint chemical flushing was tested and compared with the water-flushing. The joint acid-flushing could effectively remove petroleum hydrocarbons in contaminated aquorizem and the dosage of washing powder as a flushing agent was greatly reduced, thereby, saving approximately 1200 US dollars of expenses relative to the water-flushing. The joint salt-flushing could be an optimal method for the cleanup of meadow burozem contaminated with petroleum hydrocarbons under the experimental conditions. Moreover, the amount of surfactant remained in the two washed soils after the joint acid-flushing and the joint-salt-flushing was minimal.     

废弃放射源处理措施探讨

随着石油化工企业应用放射源数量的不断增多,放射源的安全管理已经成为石化企业安全管理工作的重要组成部分,尤其是废弃、闲置的放射源,存放不当或保存时间过久很容易丢失.对此,国家和中国石化集团公司高度重视,陆续颁布了一系列新的法规、规定.如国务院新修订的<放射性同位素与射线装置安全和防护条例>从2005年12月1日起实施,中国石化集团公司安全环保局也于2004年新修订了<放射防护管理规定>,并实行射线作业票制度.在中国石化集团公司历年安全大检查中,加大了对放射源的安全检查力度,放射源安全检查成为每次安全检查的必检内容.     

危险化学品事故应急救援预案编制过程问题讨论

通过对编制危险化学品事故应急救援预案过程中若干问题的思考,探讨如何按国家安全生产监督管理总局颁布的<危险化学品事故应急救援预案编制导则(单位版)>的要求,结合石化企业的实际情况,编制或修订详细完善的危险化学品事故应急救援预案.     

高效厌氧产甲烷颗粒污泥中微生物多样性及定量化研究

以小试高效厌氧反应器不同运行阶段的颗粒污泥为对象,利用变性梯度凝胶电泳(DGGE)、荧光原位杂交(FISH)和实时定量链式聚合酶反应(RTQ-PCR)等技术研究了其中微生物种群的多样性、特征微生物的空间分布和定量关系,结果表明:随着反应器有机负荷逐渐提高,颗粒污泥中古菌的群落结构的变化较细菌更为明显;细菌多分布在颗粒外层,而古菌则主要分布在颗粒内层;古菌含量略少于细菌,但有逐渐增多的趋势;产甲烷丝菌在古菌中的含量增加明显.     

Risk assessment for safety of soils and vegetables around a lead/zinc mine

Concentrations of heavy metals (Pb, Zn, Cd, Cu) were determined in soils and vegetables (chrysanthemum, spinach and four cultivars of Chinese cabbage from the area adjacent to a Pb/Zn mine in Shaoxing, Zhejiang province, China, and compared with the Chinese National Standards for Soil Environmental Quality. The accumulation of heavy metals in cabbage cv. Siyuegreen was investigated at different distances from the center of the mine. The vegetable plantation soils were polluted with Pb, Cd, Cu and Zn, especially by Pb and Cd. The levels of Pb and Cd were 20 and 30 times higher than the permitted standards, indicating that this Pb/Zn mining area is unsuitable for agricultural use. Chinese cabbage, chrysanthemum and spinach had different enrichment coefficients. The enrichment coefficient of Cd from soil to roots of chrysanthemum was >80% and from roots to leaves of cabbage cv. Shanghaigreen was >120%. These vegetables were polluted by heavy metals and could not be regarded as safe for human consumption. Environmental accumulation of heavy metals in the vegetable plantation soils was proportional to heavy metal accumulation in vegetables and both were inversely proportional to the distance from the lead/zinc mine.     

Kinetics on the decomposition of polychlorinated biphenyls with activated carbon-supported iron

The process of destroying polychlorinated biphenyls (PCBs) generates exhaust gases that contain low quantities of PCBs, which cannot be disposed of easily. Activated carbon (AC) can be used to adsorb residual PCBs after disposal of high-level PCBs. We examined the chemical reactivity of AC-supported iron as a catalyst to decompose PCB-153, and varied three decomposition parameters (temperature, time and iron concentration) under an atmosphere of either air or N(2). We measured the Brunauer-Emmett-Teller (BET) surface area and pore volume of AC to assess the adsorption capacity of AC before and after decomposition. At low temperatures the adsorption process was more important than the decomposition process. The decomposition process was completed within 30 and 60 min under air and N(2), respectively. The efficiency of PCB-153 decomposition at 350 degrees C for 120 min was approximately 100.0% and 97.1% under air and N(2), respectively. Analysis of inorganic chloride ions revealed that PCB-153 was effectively destroyed during decomposition. The differences between decomposition under air and N(2) reflected differences in BET surface and pore volume.     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.