Advances in air pollution control for key industries in China during the 13th five-year plan

Industrial development is an essential foundation of the national economy, but the industry is also the largest source of air pollution, of which power plants, iron and steel, building materials, and other industries emit large amounts of pollutants. Therefore, the Chinese government has promulgated a series of stringent emission regulations, and it is against this backdrop that research into air pollution control technologies for key industrial sectors is in full swing. In particular, during the 13th Five-Year Plan, breakthroughs have been made in pollution control technology for key industrial sectors. A multi-pollutant treatment technology system of desulfurization, denitrification, and dust collection, which applies to key industries such as power plants, steel, and building materials, has been developed. High-performance materials for the treatment of different pollutants, such as denitrification catalysts and desulfurization absorbers, were developed. At the same time, multi-pollutant synergistic removal technologies for flue gas in various industries have also become a hot research topic, with important breakthroughs in the synergistic removal of NO_x, SO_x, and Hg. Due to the increasingly stringent emission standards and regulations in China, there is still a need to work on the development of multi-pollutant synergistic technologies and further research and development of synergistic abatement technologies for CO₂ to meet the requirements of ultra-low emissions in industrial sectors.     

Profiling of the assembly of RecA nucleofilaments implies a potential target for environmental factors to disturb DNA repair

Double-strand breaks (DSBs), one class of the most harmful DNA damage forms that bring elevated health risks, need to be repaired timely and effectively. However, an increasing number of environmental pollutants have been identified to impair DSB repair from various mechanisms. Our previous work indicated that the formation of unsaturated RecA nucleofilaments plays an essential role in homology recombination (HR) pathway which can accurately repair DSBs. In this study, by developing a benzonase cutting protection assay and combining it with traditional electrophoretic mobility shift assay (EMSA) analysis, we further investigated the assembly patterns of four RecA mutants that display differential DSB repair ability and ATPase activity. We observed that the mutants (G204S and S69G) possessing both ATP hydrolysis and DSB repair activities form unsaturated nucleofilaments similar to that formed by the wild type RecA, whereas the other two ATP hydrolysis-deficient mutants (K72R and E96D) that fail to mediate HR form more compacted nucleofilaments in the presence of ATP. These results establish a coupling of ATPase activity and effective DSB repair ability via the assembly status of RecA nucleofilaments. This linkage provides a potential target for environmental factors to disturb the essential HR pathway for DSB repair by suppressing the ATPase activity and altering the assembly pattern of nucleofilaments.     

Rapid field testing of mercury pollution by designed fluorescent biosensor and its cells-alginate hydrogel-based paper assay

With increasing industrial activities, mercury has been largely discharged into environment and caused serious environmental problems. The growing level of mercury pollution has become a huge threat to human health due to its significant biotoxicity. Therefore, the simple and fast means for on-site monitoring discharged mercury pollution are highly necessary to protect human beings from its pernicious effects in time. Herein, a “turn off” fluorescent biosensor (mCherry L199C) for sensing Hg²⁺ was successfully designed based on direct modification of the chromophore environment of fluorescent protein mCherry. For rapid screening and characterization, the designed variant of mCherry (mCherry L199C) was directly expressed on outer-membrane of  Escherichia coli cells by cell surface display technique. The fluorescent biosensor was characterized to have favorable response to Hg²⁺ at micromole level among other metal ions and over a broad pH range. Further, the cells of the fluorescent biosensor were encapsulated in alginate hydrogel to develop the cells-alginate hydrogel-based paper. The cells-alginate hydrogel-based paper could detect mercury pollution in 5 min with simple operation process and inexpensive equipment, and it could keep fluorescence and activity stable at 4?°C for 24 hr, which would be a high-throughput screening tool in preliminarily reporting the presence of mercury pollution in natural setting.     

自吸式文丘里洗涤器雾化液滴尺寸影响因素的实验研究

为研究雾化液滴尺寸对自吸式文丘里洗涤效率的影响,从喉部气速、液面高度差以及文丘里扩散段结构等方面,研究了自吸式文丘里洗涤器雾化液滴平均直径(D_(32))的变化规律,并与Boll模型对D_(32)的预测值进行了对比。研究表明,随着喉部气速的增加,D_(32)的实验值和预测值均呈逐渐减小的趋势,且预测值略小于实验值。另外,液面高度差的增加会导致D_(32)的减小,当气相速度增大时,D_(32)加速减小。研究发现,当喉部气速大于54.6 m/s时,A_1挡板对液相流体具有更好的雾化效果,当喉部气速小于54.6 m/s时,在环形挡板内径为46～54 mm之间存在一个最佳内径,使得雾化液滴平均直径最小,文丘里洗涤器达到最佳雾化效果。     

Simultaneous measurement of aqueous redox-sensitive elements and their species across the soil-water interface

The redox-sensitive elements, such as iron, manganese, sulfur, phosphorus, and arsenic, shift their speciation every millimeter (mm) across the soil-water interface in the flooded soil environments. Monitoring of element speciation at this high-resolution (HR) within the SWI is still difficult. The key challenge lies in obtaining sufficient porewater samples at specific locations along the soil gradient for downstream analysis. Here with an optimized inductively coupled plasma mass spectrometry (ICP-MS) method and a HR porewater sampler, we demonstrate mm-scale element profiles mapping across the SWI in paddy soils. High-concentrations of iron and manganese (> 10 mg/L) were measured by ICP-MS in an extended dynamic range mode to avoid signal overflow. The iron profile along the SWI generated by the ICP-MS method showed no significant difference (p < 0.05) compared to that measured independently using a colorimetric method. Furthermore, four arsenic (arsenite, arsenate, monomethylarsonic and dimethylarsinic acid), two phosphorus (phosphite and phosphate) and two sulfur (sulfide and sulfate) species were separated in 10 min by ion chromatography -ICP-MS with the NH₄HCO₃ mobile phase. We verified the technique using paddy soils collected from the field, and present the mm-scale profiles of iron, manganese, and arsenic, phosphorus, sulfur species (relative standard deviation < 8%). The technique developed in this study will significantly promote the measurement throughput in limited samples (e.g. 100 μL) collected by HR samplers, which would greatly facilitate redox-sensitive elements biogeochemical cycling in saturated soils.     

典型钢铁企业挥发性有机物排放量测算及组分特征

选取涵盖钢铁炼制全流程的典型企业,综合采用不同核算方法估算比较了该企业挥发性有机物（VOCs）排放结果;并在此基础之上,通过氟聚化合物气袋、SUMMA罐采样及气相色谱质谱联用仪（GC-FID/MS）分析方法,对烧结、焦化、热轧和冷轧等工序废气中VOCs浓度水平及排放特征进行监测.结果表明,整个厂区VOCs年排放量为430.82t,其中工艺有组织排放占66.0%,储罐18.5%;烧结机头和焦炉推焦排放口VOCs及非甲烷总烃（NMHC）浓度高于其他点位;各工序排放的芳香烃占比较高,其中焦化装煤除尘和焦炉推焦排放口芳香烃占90%以上;烧结工序CS₂占比最高（36.6%）,其次为苯和甲苯;焦化工序占比靠前的物种为1,2,4-三甲基苯、邻甲乙苯、1,4-二乙基苯、1,2,3-三甲基苯和1,3,5-三甲基苯等;热轧工序与其他工序有一定区别,车间无组织排放芳香烃和烷烃占比均在35%左右,排放靠前的物种除芳香烃外还有高碳烷烃,如十一烷、十二烷和正丁烷等;冷轧工序有组织和无组织排放主要物种较为类似,均为芳香烃物种,如乙基苯、间/对二甲苯、甲苯、苯和邻二甲苯.不同工艺环节排放物种存在一定差异,但主要以焦化副产物（芳香烃）和烧结燃烧产物（CS₂）为主,建议钢铁行业有针对性地加强浓度高、活性高和毒性大的组分控制.     

Influence of dissolved organic matter on methylmercury transformation during aerobic composting of municipal sewage sludge under different C/N ratios

Current knowledge about the transformation of total mercury and methylmercury (MeHg) in aerobic composting process is limited. In this study, the composition and transformation of mercury and dissovled organic matter (DOM) in aerobic composting process of municipal sewage sludge were were comprehensively characterized, and the differences among the three C/N ratio (20, 26 and 30) were investigated. The main form of mercury in C/N 20 and 26 was organo-chelated Hg (F3, 46%-60%); while the main form of mercury in C/N 30 was mercuric sulfide (F5, 64%-70%). The main component of DOM in C/N 20 and 26 were tyrosine-like substance (C1, 53%-76%) while the main fractions in C/N 30 were tyrosine-like substance (C1, 28%-37%) and fulvic-like substance (C2, 17%-39%). The mercury and DOM varied significantly during the 9 days composting process. Compared to C/N 20 and 26, C/N 30 produced the less MeHg after aerobic composting process, with values of 658% (C/N 20), 1400% (C/N 26) and 139% (C/N 30) of the initial, respectively. Meanwhile, C/N 30 produced the best compost showed greater degree of DOM molecular condensation and humification. Hg fraction had been altered by DOM, as indicated by a significant correlation between mercury species and DOM components. Notably, C/N 30 should be used as an appropriate C/N ratio to control the methylation processes of mercury and degration of DOM.     

Identification of visible colored dissolved organic matter in biological and tertiary municipal effluents using multiple approaches including PARAFAC analysis

This study provided insights into the persistent yellowish color in biological and tertiary effluents of municipal wastewater through a multi-characterization approach and fluorescence excitation-emission matrix-parallel factor (EEM-PARAFAC) analysis. The characterization was performed on three to five full-scale municipal wastewater treatment plants (WWTPs), including differential log-transformed absorbance (DLnA) spectroscopy, resin fractionation, size-exclusion chromatography for apparent molecular weight analysis (SEC-AMW), and X-ray photoelectron spectroscopy (XPS) analysis. Hydrophobic acids (HPOA) were abundant in visible colored dissolved organic matter (DOM). The SEC-AMW result showed that the molecular weight of the colored substances in the secondary effluents is mainly distributed in the range of 2–3 kDa. Through XPS analysis, C-O/C-N and pyrrolic/pyridonic (N-5) were found to be positively correlated with chroma. PARAFAC component models were built on biological (two components) and tertiary effluent (three components) and the correlation analysis revealed that PARAFAC component 2 in biological effluent (BE-C2) and component 1 in tertiary effluent (TE-C1), which were ascribed to Hydrophobic acids and Humic acid-like, were the responsible visible colored DOM components cause yellowish color. In addition, component similarity testing found that the identified visible colored DOM PARAFAC BE-C2, and PARAFAC TE-C1 were identical (0.96) in physicochemical properties, with 4% removal efficacy on average, compared with 11% for invisible colored DOM. This implied that tertiary effluents containing colorants (TE-C1) were resistant to degradation/removal using different disinfection and filtration processes in advanced treatments. This sheds light on many physicochemical aspects of PARAFAC-identified visible colored DOM components and provides spectral data to build an online monitoring system.     

Effects of co-exposure to lead and manganese on learning and memory deficits

Lead (Pb) and manganese (Mn) are common neurotoxins. However, individuals are subject to co-exposures in real life, and it is therefore important to study these metals in combination. Weaning Sprague-Dawley rats were given ad libitum access to drinking water solutions containing Pb (100 mg/L), Mn (2.5 mg/mL) or a mixture, and each treatment had its own minocycline (50 mg/(kg•day)) supplement group. The results showed a significant difference in spatial memory and induction levels of hippocampal long-term potentiation (LTP) in all exposure groups when compared with controls. The combined-exposure group exhibited the most pronounced effect when compared with each of the single-metal exposure groups. Microglia displayed activation at day 3 after exposure alone or in combination, while astrocytes showed activation at day 5, accompanied by decreased expression levels of GLAST, GLT-1, and GS. Furthermore, the levels of glutamate in the synaptic cleft increased significantly. When microglial activation was inhibited by minocycline, the activation of astrocytes and the expression of GLAST, GLT-1, and GS were both reversed. In addition, upon minocycline treatment, hippocampal LTP impairment and cognitive injury were significantly alleviated in each of the exposure groups. These results suggest that combined exposure to Pb and Mn can cause greater effects on cognition and synaptic plasticity when compared to single-metal exposure groups. The reason may involve abnormal activation of microglia leading to excessive regulation of astrocytes, resulting in glutamate reuptake dysfunction in astrocytes and leading to perturbed cognition and synaptic plasticity.