Comparing Waste-to-Energy technologies by applying energy system analysis

Even when policies of waste prevention, re-use and recycling are prioritised a fraction of waste will still be left which can be used for energy recovery. This article asks the question: How to utilise waste for energy in the best way seen from an energy system perspective? Eight different Waste-to-Energy technologies are compared with a focus on fuel efficiency, CO₂ reductions and costs. The comparison is carried out by conducting detailed energy system analyses of the present as well as a potential future Danish energy system with a large share of combined heat and power as well as wind power. The study shows potential of using waste for the production of transport fuels. Biogas and thermal gasification technologies are hence interesting alternatives to waste incineration and it is recommended to support the use of biogas based on manure and organic waste. It is also recommended to support research into gasification of waste without the addition of coal and biomass. Together the two solutions may contribute to alternate use of one third of the waste which is currently incinerated. The remaining fractions should still be incinerated with priority to combined heat and power plants with high electric efficiency.     

Anhydrous ethanol production by extractive distillation: A solvent case study

Production of anhydrous ethanol in large scale has been made by extractive distillation using conventional solvents like ethylene-glycol. In the present paper, extractive distillation process is studied to obtain pure ethanol using ethylene-glycol and tetraethylene-glycol as solvents. Residue curve maps are used to analyse the proposed distillation processes in interpreting mixture behaviours and feasibility of distillation columns. The industrial process is simulated at steady state from residue curve map analysis. Simulation results for the ethanol/water mixture using ethylene-glycol, the conventional solvent, and tetraethylene-glycol, an alternative solvent, are presented. These results showed that the process using tetraethylene-glycol is reliable, although it requires more energy than the process with ethylene-glycol. However, ethylene-glycol has a considerable toxicity level while tetraethylene-glycol is non-toxic.     

International Environmental Agreements: Design of Optimal Transfers Under Heterogeneity

International environmental agreements (IEAs) can coordinate abatement of transboundary pollutants. This paper investigates how heterogeneous countries facing a stock pollutant might structure such an agreement. In particular, we examine how an IEA might be implemented with a set of monetary transfers. The focus is on transfers that are time invariant, linear in emissions, and consistent with budget balance. There is a range of such schemes that would induce efficient emissions. We provide a simple and intuitive characterization of these penalties and describe how specific proposals might be chosen in order to facilitate compliance and implementation. Our proposals are illustrated with a simple example. We show that heterogeneity reduces the scope for penalty schemes to jointly satisfy desirable properties.     

Leading and lagging: Process safety climate–incident relationships at one year

In order to evaluate the leading and lagging effects of process safety climate on incidents, we correlated safety climate survey data with organizational safety records from before and after the survey time period. We obtained data from a large, multinational organization with manufacturing operations involving a number of complex processes, chemicals, and hazardous substances. A total of 7728 employees from 62 sites responded to a safety climate survey in 2007. Individual responses were aggregated to the site-level and matched to site-level organizational records of process safety incidents 1 year before and 1 year after survey administration. Employees’ perceptions of good routine housekeeping were significantly related to environmental impact incidents as both a leading and a lagging indicator, as well as fires/explosions and property damage outcomes. Employees’ perceptions of systems to prevent backlogs and the extent to which health and safety problems are promptly corrected were also related to environmental releases and fires/explosions. Implications for process safety climate research, organizational survey strategies, and organizational climate change are discussed.     

Analytical survey of arsenic in geothermal waters from sites in Kyushu,Japan, and a method for removing arsenic using magnetite

The objective of this study was to survey the cation and anion contents of geothermal waters to gather fundamental information on geographical variations. Sixteen sites in hot spring areas on the island of Kyushu in Japan were studied. The study focused on the arsenic content of the samples. Very high arsenic concentrations (more than 0.1 mg/l) were detected in most of the geothermal waters sampled. High contents of boron and fluoride (more than 1.0 mg/l) were also detected in some samples. Arsenic removal was performed on a laboratory scale using columns packed with a magnetite-type adsorbent. The reduction of arsenic contamination to a concentration of less than 0.01 mg/l could be achieved in the early stages of adsorption (bed volume = 200).     

Environmentally Friendly Polyurethane Composites: Preparation, Characterization and Mechanical Properties

The waterborne polyurethane (PU) prepolymer was prepared based on isophorone diisocyanate (IPDI), polyester polyol (N220), dimethylol propionic acid (DMPA) and hydroxyethyl methyl acrylate (HEMA). The modified waterborne polyurethane–acrylate (PUA) emulsions were obtained with different proportions of acrylate (butyl acrylate and methyl methacrylate) and initiating agent by in situ dispersion technique. The structures and thermal properties of prepared PU and PUA were analyzed and characterized with FT-IR, UV–Vis spectroscopy and DSC. The PUA hybrid samples had lower glass transition temperature of hard segment and higher decomposition temperatures than PU sample. Performances of the emulsion and film were studied by means of apparent viscidity, particle size and polydispersity, surface tension and mechanical properties. The results indicated that the particle sizes of the PUA dispersions were larger than those of the pure PU and the solvent resistance, mechanical properties of PUA films was improved compare with the unmodified polyurethane film. The film had the biggest hardness and the least water absorption when the BA/MMA mass ratio 5:5 modified PU. The obtained PUA have great potential application such as coatings, leather finishing, adhesives, sealants, plastic coatings and wood finishes.     

A Lost Link between a Flightless Parrot and a Parasitic Plant and the Potential Role of Coprolites in Conservation Paleobiology

Late Quaternary extinctions and population fragmentations have severely disrupted animal‐plant interactions globally. Detection of disrupted interactions often relies on anachronistic plant characteristics, such as spines in the absence of large herbivores or large fruit without dispersers. However, obvious anachronisms are relatively uncommon, and it can be difficult to prove a direct link between the anachronism and a particular faunal taxon. Analysis of coprolites (fossil feces) provides a novel way of exposing lost interactions between animals (depositors) and consumed organisms. We analyzed ancient DNA to show that a coprolite from the South Island of New Zealand was deposited by the rare and threatened kakapo (Strigops habroptilus), a large, nocturnal, flightless parrot. When we analyzed the pollen and spore content of the coprolite, we found pollen from the cryptic root‐parasite Dactylanthus taylorii. The relatively high abundance (8.9% of total pollen and spores) of this zoophilous pollen type in the coprolite supports the hypothesis of a former direct feeding interaction between kakapo and D. taylorii. The ranges of both species have contracted substantially since human settlement, and their present distributions no longer overlap. Currently, the lesser short‐tailed bat (Mystacina tuberculata) is the only known native pollinator of D. taylorii, but our finding raises the possibility that birds, and other small fauna, could have once fed on and pollinated the plant. If confirmed, through experimental work and observations, this finding may inform conservation of the plant. For example, it may be possible to translocate D. taylorii to predator‐free offshore islands that lack bats but have thriving populations of endemic nectar‐feeding birds. The study of coprolites of rare or extinct taxonomic groups provides a unique way forward to expand existing knowledge of lost plant and animal interactions and to identify pollination and dispersal syndromes. This approach of linking paleobiology with neoecology offers significant untapped potential to help inform conservation and restoration plans. Un Eslabón Perdido entre un Loro No Volador y una Planta Parásita y el Papel Potencial de Coprolitos en Paleobiología de la Conservación