Runoff and leaching of atrazine and alachlor on a sandy soil as affected by application in sprinkler irrigation

Rainfall simulation was used with small packed boxes of soil to compare runoff of herbicides applied by conventional spray and injection into sprinkler-irrigation (chemigation), under severe rainfall conditions. It was hypothesized that the larger water volumes used in chemigation would leach some of the chemicals out of the soil surface rainfall interaction zone, and thus reduce the amounts of herbicides available for runoff. A 47-mm rain falling in a 2-hour event 24 hours after application of alachlor (2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl)-acetamide) and atrazine (6-chloro-N-ethyl-N'-(1-methylethyl)-1,3,5-triazine-2, 4-diamine) was simulated. The design of the boxes allowed a measurement of pesticide concentrations in splash water throughout the rainfall event. Initial atrazine concentrations exceeding its' solubility were observed. When the herbicides were applied in 64,000 L/ha of water (simulating chemigation in 6.4 mm irrigation water) to the surface of a Tifton loamy sand, subsequent herbicide losses in runoff water were decreased by 90% for atrazine and 91% for alachlor, as compared to losses from applications in typical carrier water volumes of 187 L/ha. However, this difference was not due to an herbicide leaching effect but to a 96% decrease in the amount of runoff from the chemigated plots. Only 0.3 mm of runoff occurred from the chemigated boxes while 7.4 mm runoff occurred from the conventionally-treated boxes, even though antecedent moisture was higher in the former. Two possible explanations for this unexpected result are (a) increased aggregate stability in the more moist condition, leading to less surface sealing during subsequent rainfall, or (b) a hydrophobic effect in the drier boxes. In the majority of these pans herbicide loss was much less in runoff than in leachate water. Thus, in this soil, application of these herbicides by chemigation would decrease their potential for pollution only in situations where runoff is a greater potential threat than leaching.     

Driving performance comparing older versus younger drivers

Objectives: A cross-sectional study was conducted at the Touro University California campus to compare differences in reaction times and driving performance of younger adult drivers (18–40 years) and older adult drivers (60 years and older). Each test group consisted of 38 participants.

Methods: A Simple Visual Reaction Test (SVRT) tool was used to measure reaction times. The STISIM Drive M100 driving simulator was used to assess driving parameters. Driving performance parameters included mean lane position, standard deviation of mean lane position measured, mean speed, standard deviation of mean speed, car-following delay, car-following modulus, car-following coherence, off-road accidents, collisions, pedestrians hit, and traffic light tickets.

Results: Compared to younger participants, older drivers experienced significantly slower reaction times (510.0 ± 208.8 vs. 372.4 ± 96.1 ms, P =.0004), had more collisions (0.18 ± 0.39 vs. none, P =.0044), drove slower (44.6 ± 6.6 vs. 54.9 ± 11.7 mph, P <.0001), deviated less in speed (12.6 ± 4.3 vs. 16.8 ± 6.3, P =.0011), and were less able to maintain a constant distance behind a pace car (0.42 ± 0.23 vs. 0.59 ± 0.24; P =.0025).

Conclusions: Differences exist in driving patterns of older and younger drivers as measured by reaction times and driving simulator outcomes. These results are the first to compare these 2 specific adult age groups' driving performance as measured by a standardized driving simulator scenario. Identifying these differences is essential in addressing them and preventing future traffic injuries.     

Benefits of kin association: related and familiar zebrafish larvae (<Emphasis Type="Italic">Danio rerio</Emphasis>) show improved growth

Zebrafish (Danio rerio) larvae prefer the olfactory cues of kin to non-kin. We examined the potential benefits of kin preference by comparing growth rate, shoaling, and aggressive behavior in juvenile zebrafish housed in groups of either familiar kin or unfamiliar non-kin. Over an observation period of 5 days, the animals grew 33% more in kin groups; however, neither shoaling nor the frequency of aggressive interactions was different in groups of related versus unrelated individuals. Shoaling behavior increased with increasing observation time and increasing age, while aggressive behavior remained the same. We conclude that associating with kin probably creates a less stressful environment that allows for higher growth rates, which can lead to higher direct fitness based on increased survival and earlier reproduction. Kin recognition leading to kin-structured groups may therefore be under positive selection.     

When “It depends” amounts to more than simple contingent relationships: Three canonical forms of inversions

Organizational behavior theories can be subject to potential inversions in the nature of the effects expected or described (i.e. an effect inverts from positive to negative or vice versa). Yet, inversions are rarely considered or assessed. We explore three possible canonical inversions: the maximum or minimum point in a quadratic regression model, the point of intersection in disordinal interactions, and the change of slope in a moderated regression model. We describe both the motivation for, and the theoretical and empirical importance of, considering such inversions in theory‐building and testing. We consider common situations in which inversions are misinterpreted empirically and present methods to conduct explorations for potential inversions. Two different cases of errors concerning inversions can occur. In the first case entailing omission, an inversion is occurring but is not observed in the sample. In the second case, researchers wrongly assume an inversion is occurring in their model, yet the prospective inversion would actually occur out of the range of possible values on the focal variable(s), and is thus not significant. We illustrate different types of inversions using simulated examples. Ultimately, we seek to encourage and equip management researchers to identify important theoretical boundary conditions imposed by inversions. Copyright © 2016 John Wiley & Sons, Ltd.     

Correlates of group size in a cooperatively breeding cichlid fish (Neolamprologus pulcher)

Neolamprologus pulcher, a cooperatively breeding cichlid fish from Lake Tanganyika, lives in permanent social groups comprising one breeding pair and helpers of both sexes. Variation in group size (1-14 helpers) provides an opportunity to investigate factors that affect how many helpers remain in a group and in turn how group size affects reproductive success. This field study showed that larger groups live in larger territories with more shelter. Group size was more strongly correlated with territory quality than with breeder size. Experimental enhancement of territory quality did not affect group size but group size decreased when territory quality was reduced. Breeders living in a large group benefit because such individuals feed more often and have lower workloads and greater reproductive success. Helpers in larger groups also fed more frequently but did not have lower workloads. This is one of the first experimental studies to examine the factors influencing group size in cooperative breeders.     

Impact of laboratory-imposed physical disturbance on the abundance of four isolates of marine gymnamoebae

Four species of gymnamoebae isolated from a sandy shore were subjected to physical disturbance within sand microcosms containing either 250 or 125 μm sand. Firstly, the effect of two different strengths of physical disturbance on amoebae populations within sand was investigated. Secondly, whether the size of sand grains occupied by amoebae populations changed their response to disturbance events was assessed. Highest abundances of amoebae were recorded in control flasks containing 125 μm sand. Increasing the strength of disturbance decreased the abundance of all four species. Abundances of the two smallest isolates (Platyamoeba sp. and a limax amoeba) were least affected by increasing disturbance. The greatest decrease in abundance was observed in populations of two larger (>15 μm) Mayorella sp. and Vannella sp. The greatest impact of physical disturbance was seen on populations within 250 μm sand. This study shows that physical disturbance may be an important community structuring force within natural marine gymnamoebae communities.     

Shaping more resilient and just food systems: Lessons from the COVID-19 Pandemic

The COVID-19 pandemic has highlighted weaknesses in global food systems, as well as opening windows of opportunity for innovation and transformation. While the nature and extent of this crisis is rare, extreme climatic events will increase in magnitude and frequency, threatening similar societal impacts. It is therefore critical to identify mechanisms for developing food systems that are resilient to such impacts. We examine impacts of the crisis on UK food systems and how these further entrenched social inequalities. We present data on the experiences and actions of producers, consumers, and community organisers. The data were collected by adapting ongoing research to include surveys, interviews and online workshops focused on the pandemic. Actors’ responses to the pandemic foreshadow how enduring change to food systems can be achieved. We identify support required to enable these transformations and argue that it is vital that these opportunities are embedded in food justice principles which promote people-centred approaches to avoid exacerbating injustices prevalent pre-crisis. Learning from these experiences therefore provides insights for how to make food systems elsewhere more resilient and just.     

Sea-level rise in Indonesia: on adaptation priorities in the agricultural sector

Adaptation to climate-change impacts requires understanding of where impacts are to be expected and what their magnitude may be. Adaptation funds are only a limited resource for helping affected parties in coping with climate-change impacts. The application of suitable methods helps to determine the recipients of adaptation aid. A quantification of impacts based on different impact analyses can aid in taking on various perspectives on the same problem in order to identify the appropriate perspective for the given decision-making context or for identifying impact patterns. Once executed, this prioritizes adaptation needs and finding a suitable allocation rule, given the policy makers perception of the decision-making context. The study introduces a set of methods of spatially explicit, sub-national (province level), and country-wide impact analyses regarding inundation impacts on agricultural areas for four important food crops in Indonesia. These methods are applied to a 1 and 2 m sea-level rise scenario and include a novel approach for impact analyses, data envelopment analysis, which is not widely used in environmental studies as of yet. Based on the given case study, the paper demonstrates the applicability of these methods and identifies impact patterns.     

Residual and contact herbicide transport through field lysimeters via preferential flow

Usage of glyphosate [N-(phosphonomethyl)-glycine] and glufosinate [2-amino-4-(hydroxy-methylphosphinyl)butanoic acid] may reduce the environmental impact of agriculture because they are more strongly sorbed to soil and may be less toxic than many of the residual herbicides they replace. Preferential flow complicates the picture, because due to this process, even strongly sorbed chemicals can move quickly to ground water. Therefore, four monolith lysimeters (8.1 m(2) by 2.4 m deep) were used to investigate leaching of contact and residual herbicides under a worst-case scenario. Glufosinate, atrazine (6-chloro-N(2)-ethyl-N(4)-isopropyl-1,3,5-triazine-2,4-diamine), alachlor [2-chloro-N-(2,6-diethylphenyl)-N-(methoxymethyl) acetamide], and linuron (3-3,4-dichlorophenyl-1-methoxy-1-methylurea) were applied in 1999 before corn (Zea mays L.) planting and glyphosate, alachlor, and metribuzin [4-amino-6-(1,1-dimethylethyl)-3-(methylthio)-1,2,4-triazin-5(4H)-one] were applied in 2000 before soybean [Glycine max (L.) Merr.] planting. A high-intensity rainfall was applied shortly after herbicide application both years. Most alachlor, metribuzin, atrazine, and linuron losses occurred within 1.1 d of rainfall initiation and the peak concentration of the herbicides coincided (within 0.1 d of rainfall initiation in 2000). More of the applied metribuzin leached compared with alachlor during the first 1.1 d after rainfall initiation (2.2% vs. 0.035%, P < 0.05). In 1999, 10 of 24 discrete samples contained atrazine above the maximum contaminant level (atrazine maximum contaminant level [MCL] = 3 mug L(-1)) while only one discrete sample contained glufosinate (19 mug L(-1), estimated MCL = 150 mug L(-1)). The results indicate that because of preferential flow, the breakthrough time of herbicides was independent of their sorptive properties but the transport amount was dependent on the herbicide properties. Even with preferential flow, glyphosate and glufosinate were not transported to 2.4 m at concentrations approaching environmental concern.