Concentration of some heavy metals in organically grown primitive,old and modern wheat genotypes: Implications for human health

The concentration of six HMs (Cd, Cr, Co, Pb, Hg and Ni) was analysed in 321 organically grown winter and spring wheat genotypes from six genotype groups, i.e. selections, old landraces, primitive wheat, spelt, old cultivars and cultivars. Also the potential risk of individual toxic HM to human health was estimated by using the Hazard Quotient (HQ). Significantly the lowest grain concentration of Cd was found in primitive wheat as compared to all other investigated genotype groups. Intake of HM by consumption of whole wheat grain was not found to pose a health risk to human for any of the investigated genotype groups. The bio-concentration factor of Cd for the different genotype groups indicated a lower ability to accumulate Cd for primitive wheat as compared to other genotype groups. The primitive wheat was found the most promising and might be of interest in future wheat breeding programs to develop wheat genotypes with low HMs concentration in the grain.     

The Use of Health Risk Assessment to Estimate Desirable Sampling Detection Limits

Abstract

The inclusion of non-detected chemicals in a health risk assessment may lead, in some cases, to estimated risks that exceed regulatory thresholds, because one must use the detection limit or half of the detection limit. This study presents a methodology which will allow one to estimate appropriate detection limits by conducting a health risk assessment prior to the source sampling program. The advantages and shortcomings of various levels of detail in the risk assessment to determine those detection limits are discussed. The application of the methodology is demonstrated with a case study of the potential health effects of power plant stack emissions.     

Urea as a PCDD/F Inhibitor in Municipal Waste Incineration

ABSTRACT

Emissions of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) from municipal waste incineration have been widely studied because of their extensive toxicity, and many efforts have been made to restrict their emissions. Although a number of chemical compounds have been shown in laboratory-scale tests to inhibit the formation of PCDD/Fs, few have been tested in pilot- or full-scale plants. This work evaluates the effect of urea as a PCDD/F inhibitor in a pilot-scale incinerator that uses refuse-derived fuel (RDF). The decomposition of urea under the test conditions was also studied using detailed kinetic modeling. An aqueous solution of urea was injected into the flue gas stream after the furnace at ~730 °C, with varied urea concentrations and flue gas residence times used between the furnace and the sampling point. The results demonstrate that urea can successfully inhibit PCDD/F formation in waste incineration if concentrations and injection points are properly adjusted. The kinetic model showed that urea can be rapidly decomposed under appropriate flue gas conditions, indicating that in addition to the urea molecule itself, decomposition products of urea can also be responsible for the reduction of PCDD/F production during incineration.     

Comparison of the MOVES2010a,MOBILE6.2, and EMFAC2007 mobile source emission models with on-road traffic tunnel and remote sensing measurements

The Desert Research Institute conducted an on-road mobile source emission study at a traffic tunnel in Van Nuys, California, in August 2010 to measure fleet-averaged, fuel-based emission factors. The study also included remote sensing device (RSD) measurements by the University of Denver of 13,000 vehicles near the tunnel. The tunnel and RSD fleet-averaged emission factors were compared in blind fashion with the corresponding modeled factors calculated by ENVIRON International Corporation using U.S. Environmental Protection Agency's (EPA's) MOVES2010a (Motor Vehicle Emissions Simulator) and MOBILE6.2 mobile source emission models, and California Air Resources Board's (CARB's) EMFAC2007 (EMission FACtors) emission model. With some exceptions, the fleet-averaged tunnel, RSD, and modeled carbon monoxide (CO) and oxide of nitrogen (NO_x) emission factors were in reasonable agreement (±25%). The nonmethane hydrocarbon (NMHC) emission factors (specifically the running evaporative emissions) predicted by MOVES were insensitive to ambient temperature as compared with the tunnel measurements and the MOBILE- and EMFAC-predicted emission factors, resulting in underestimation of the measured NMHC/NO_x ratios at higher ambient temperatures. Although predicted NMHC/NO_x ratios are in good agreement with the measured ratios during cooler sampling periods, the measured NMHC/NO_x ratios are 3.1, 1.7, and 1.4 times higher than those predicted by the MOVES, MOBILE, and EMFAC models, respectively, during high-temperature periods. Although the MOVES NO_x emission factors were generally higher than the measured factors, most differences were not significant considering the variations in the modeled factors using alternative vehicle operating cycles to represent the driving conditions in the tunnel. The three models predicted large differences in NO_x and particle emissions and in the relative contributions of diesel and gasoline vehicles to total NO_x and particulate carbon (TC) emissions in the tunnel.

Implications: Although advances have been made to mobile source emission models over the past two decades, the evidence that mobile source emissions of carbon monoxide and hydrocarbons in urban areas were underestimated by as much as a factor of 2–3 in past inventories underscores the need for on-going verification of emission inventories. Results suggest that there is an overall increase in motor vehicle NMHC emissions on hot days that is not fully accounted for by the emission models. Hot temperatures and concomitant higher ratios of NMHC emissions relative to NO_x both contribute to more rapid and efficient formation of ozone. Also, the ability of EPA's MOVES model to simulate varying vehicle operating modes places increased importance on the choice of operating modes to evaluate project-level emissions.     

Adsorption of Hydrochloric Acid on Solid Slaked Lime for Flue Gas Clean Up

The reaction between hydrochloric acid and solid slaked lime was investigated by passing simulated flue gas through a fixed bed reactor. The influence of CO₂ and H₂O present in the flue gas was studied, as well as the influence of the reaction temperature in the range 423 to 673 K. The reaction was found to be of first order with respect to the two reactants. Expressions to account for the temperature and the CO₂ and H₂O concentrations were derived from the experimental data.     

Determinants of maternal and fetal exposure and temporal trends of perfluorinated compounds

In recent years, some perfluorinated compounds (PFCs) have been identified as potentially hazardous substances which are harmful to the environment and human health. According to limited data, PFC levels in humans could be influenced by several determinants. However, the findings are inconsistent. In the present study, perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA) were measured in paired maternal and cord serum samples (N?=?237) collected between 1978 and 2001 in Southern Sweden to study the relationship between these and to investigate several potential determinants of maternal and fetal exposure to PFCs. Time trends of PFCs in Swedish women were also evaluated. The study is a part of the Fetal Environment and Neurodevelopment Disorders in Epidemiological Research project. PFOS, PFOA, and PFNA levels (median) were higher in maternal serum (15, 2.1, and 0.24 ng/ml, respectively) than in cord serum (6.5, 1.7, and 0.20 ng/ml, respectively). PFC levels were among the highest in women originating from the Nordic countries and the lowest in women from the Middle East, North Africa, and sub-Saharan Africa. Multiparous women had lower serum PFOA levels (1.7 ng/ml) than primiparous women (2.4 ng/ml). Maternal age, body mass index, cotinine levels, and whether women carried male or female fetuses did not affect serum PFC concentrations. Umbilical cord serum PFC concentrations showed roughly similar patterns as the maternal except for the gestational age where PFC levels increased with advancing gestational age. PFOS levels increased during the study period in native Swedish women. In summary, PFOS levels tend to increase while PFOA and PFNA levels were unchanged between 1978 and 2001 in our study population. Our results demonstrate that maternal country of origin, parity, and gestational age might be associated with PFC exposure.     

PFAS profiles in three North Sea top predators: metabolic differences among species?

Profiles of seven compounds of perfluoro-alkyl substances (PFASs) were compared among three species of top predators from the Danish North Sea: the white-beaked dolphin (Lagenorhynchus albirostris), the harbor porpoise (Phocoena phocoena), and the harbor seal (Phoca vitulina). The seals had higher total burdens (757.8 ng g^?1 ww) than the dolphins (439.9 ng g^?1 ww) and the porpoises (355.8 ng g^?1 ww), probably a reflection of feeding closer to the shore and thus contamination sources. The most striking difference among the species was the relative contribution of perfluorooctanesulfonamide (PFOSA) to the profiles; the seals (0.1 %) had much lower levels than porpoises (8.3 %) and dolphins (26.0 %). In combination with the values obtained from the literature, this result indicates that Carnivora species including Pinnipedia have a much higher capacity of transforming PFOSA to perfluorooctane sulfonic acid (PFOS) than cetacean species. Another notable difference among the species was that the two smaller species (seals and porpoises) with supposedly higher metabolic rates had lower concentrations of the perfluorinated carboxylic acids, which are generally more easily excreted than perfluorinated sulfonamides. Species-specific characteristics should be recognized when PFAS contamination in marine mammals is investigated, for example, several previous studies of PFASs in cetaceans have not quantified PFOSA.     

Simulation of Sulfate and Nitrate Chemistry in Power Plant Plumes

ABSTRACT

The rate of formation of secondary particulate matter (PM) in power plant plumes varies as the plume material mixes with the background air. Consequently, the rate of oxidation of sulfur dioxide (SO₂) and nitrogen dioxide (NO₂) to sulfate and nitric acid, respectively, can be very different in plumes and in the background air (i.e., air outside the plume). In addition, the formation of sulfate and nitric acid in a power plant plume is a strong function of the chemical composition of the background air and the prevailing meteorological conditions.

We describe the use of a reactive plume model, the Reactive and Optics Model of Emissions, to simulate sulfate and nitrate formation in a power plant plume for a variety of background conditions. We show that SO₂ and NO₂ oxidation rates are maximum in the background air for volatile organic compound (VOC)-limited airsheds but are maximum at some downwind distance in the plume when the background air is nitrogen oxide (NO_x)-limited. Our analysis also shows that it is essential to obtain measurements of background concentrations of ozone, aldehydes, peroxyacetyl nitrate, and other VOCs to properly describe plume chemistry.     

Oxidoreductases provide a more generic response to metallic stressors (Cu and Cd) than hydrolases in soil fungi: new ecotoxicological insights

The present study investigates the effect of metals on the secretion of enzymes from12 fungal strains maintained in liquid cultures. Hydrolases (acid phosphatase, β-glucosidase, β-galactosidase, and N-acetyl-β-glucosaminidase) and ligninolytic oxidoreductases (laccase, Mn, and lignin peroxidases) activities, as well as biomass production, were measured in culture fluids from fungi exposed to Cu or Cd. Our results showed that all fungi secreted most of the selected hydrolases and that about 50 % of them produced a partial oxidative system in the absence of metals. Then, exposure of fungi to metals led to the decrease in biomass production. At the enzymatic level, Cu and Cd modified the secretion profiles of soil fungi. The response of hydrolases to metals was contrasted and complex and depended on metal, enzyme, and fungal strain considered. By contrast, the metals always stimulated the activity of ligninolytic oxidoreductases in fungal strains. In some of them, oxidoreductases were specifically produced following metal exposure. Fungal oxidoreductases provide a more generic response than hydrolases, constituting thus a physiological basis for their use as biomarkers of metal exposure in soils.