Kinetic,equilibrium and thermodynamic studies for the sorption of metribuzin from aqueous solution using banana peels,an agro-based biomass

Banana peels were employed for the removal of metribuzin from aqueous solution. Sorption in the batch mode was optimized regarding pH, contact time, sorbent dose, initial pesticide concentrations, and temperature. The sorption data were fitted to pseudo-first-order, pseudo-second-order, intraparticle diffusion, Elovich, and liquid film diffusion model, the pseudo-second-order exhibiting best fit (R² = 0.9803). Of the four most common sorption isotherm models (Langmuir, Freundlich, Tempkin, and Dubinin–Radushkevich), the data followed the Langmuir isotherm with highest correlation. The maximum adsorption capacity was found to be 167 mg g^?1. Gibbs free energy, enthalpy, and entropy showed that the sorption was exothermic and spontaneous.     

Laboratory scale studies on removal of chromium from industrial wastes

Chromium being one of the major toxic pollutants is discharged from electroplating and chrome tanning processes and is also found in the effluents of dyes,paint pigments,manufacturing units etc.Chromium exists in aqueous systems in both trivalent(Cr^3 )and hexavalent (Cr^6 )forms.The hexavalent form is carcinogenic and toxic to aquatic life,whereas Cr^3 is however comparatively less toxic.This study was undertaken to investigate the total chromium removal from industial effluents by chemical means in order to achieve the Pakistan NEQS level of 1 mg/L by the methods of reduction and precipitation.The study was conducted in four phase Ⅰ,the optimum pH and cost effective reducing agent among the four popular commercial chemicals was selected.As a result,pH of 2 was found to be most suitable and sodium meta bisulfate was found to be the most cost effective reducing agent respectively.Phase Ⅱ showed that lower dose of sodium meta hisulfate was sufficient to obtain 100% efficiency in reducing Cr^6 to Cr^3 ,and it was noted that reaction time had no significance in the whole process.A design curve for reduction process was established which can act as a tool for treatment of industrial effluents.Phase Ⅲ studies indicated the best pH was 8.5 for precipitation of Cr^3 to chromium hydroxide by using lime.An efficiency of 100% was achievable and a settling time of 30 minutes produced clear effluent.Finally in Phase Ⅳ actual waste samples from chrome tanning and electroplating industries,when precipitated at pH of 12 gave 100% efficiency at a settling time of 30 minutes and confirmed that chemical means of reduction and precipitation is a feasible and viable solution for treating chromium wastes from industries.     

Driver's obesity and road crash risks in the United States

Objective: We assessed obesity trends in U.S. drivers involved in fatal crashes since 1999 and distinguished whether crash risk factors were different between obese and nonobese drivers.

Methods: We included only drivers of passenger cars involved in fatal traffic crashes between January 1, 1999, and December 31, 2012. Obesity was classified according to the World Health Organization guidelines and profiled between 1999 and 2012 using the adjusted prevalence ratio (aPR) from log-binomial regression models. Differences in crash risks (e.g., driver's fatality, drunk driving, seat belt nonuse) between obese and nonobese drivers were estimated as adjusted odds ratios (aORs) using logistic regression models.

Results: A total of 753,024 U.S. drivers were involved in fatal crashes, for which obesity information was available for 534,887. About 56% (n = 299,078) were driving passenger cars. The prevalence of class I obesity increased from 10% in 1999 to 14% in 2012 (aPR = 1.50, 95% confidence interval [CI], 1.42–1.58), class II obesity from 3 to 5% (aPR = 2.22, 95% CI, 2.05–3.01), and class III obesity from 1 to 2% (aPR = 2.65; 95% CI, 2.27–3.10). Compared to nonobese controls, obese drivers had significantly higher risks for fatality (1.10 ≤ aOR ≤ 1.47), seat belt nonuse (1.00 ≤ aOR ≤ 1.21), need for extrication (1.01 ≤ aOR ≤ 1.23), and ambulance transport time ≥30 min (1.01 ≤ aOR ≤ 1.28). Compared to nonobese controls, obese drivers were less likely to drink drive (0.41 ≤ aOR ≤ 0.72) or speed >65 mph (0.78 ≤ aOR ≤ 0.93).

Conclusion: The rising national prevalence of obesity extends to U.S. drivers involved in fatal crashes and indicates the need to improve seat belt use, vehicle design, and postcrash care for this vulnerable population.     

Does low N-mineralisation rate in soils under grass help limit nitrate leaching in summer?

This paper aimed to confirm the hypothesis that rates of ammonification and net mineral-N production in soils under grass in summer are low and this, rather than nitrate uptake by plants, reduces mineral leaching from soils in summer. Six sets of soil samples were collected from under mown grass on the University of York campus in the UK. Samples were taken from two depths in late summer (August) and late autumn (November) to compare seasonal differences in N species transformations when field-moist soils were incubated for a week at ambient outdoor temperatures after prior removal of vegetation. Ammonification and net mineral-N production rates were low in August in spite of warm temperatures. Net mineral-N production rates were also low in November. The results agreed with those of an earlier study in a different year after considering weather differences between years. They support the hypothesis that litter accumulated over autumn/winter will be minimally mineralised and retain N before the temperature rises in spring. The study shows the merit of measuring concentrations of mineral-N species in both fresh soils and soils incubated at ambient outdoor temperatures after removing plant material to eliminate plant N uptake effects. The results suggest that soil C% and N% are more important than soil C:N ratio alone in understanding controls on N transformations.     

Elements of fishing community resilience to climate change in the coastal zone of Bangladesh

Resilience has been conceptualized in various ways by anthropologists, ecologists, systems scientists and engineers; the boundaries of resilience are subjective and context dependent. Consequently, choosing the standards and metrics for assessing resilience remains key challenges for policy makers. In this study, using multicriteria evaluation of 40 basic criteria of human, physical, financial, natural and social assets, we have identified several elements, such as experienced fishermen, natural abundance of hilsa (Tenualosa ilisha), ability to assert decision on fish selling, nets and boats ownership, social harmony and capacity of buying food as essential livelihood assets for the fishermen at Hatiya Island, Bangladesh. These assets may enhance the relative resilience of the fishing community of the island to climate change by as much as 20–40%. The results of this study will improve our understanding of the elements that lead to resilience at the community level.     

Modelling above- and below-ground mass loss and N dynamics in wooden dowels (LIDET) placed across North and Central America biomes at the decadal time scale

This article focuses on modelling above and below-ground mass loss and nitrogen (N) dynamics based on the wooden dowels (Gonystylus bancanus [Miq.] Kurz) of the decadal Long-term Intersite Decomposition Experiment (LIDET) data. These dowels were placed at 27 locations across North and Central America, involving tropical, temperate and boreal forests, grasslands, wetlands and the tundra. The dowel, inserted vertically into the soil with one half remaining exposed to the air, revealed fast mass and N losses under warm to humid conditions, and slow losses under wet as well as cold to dry conditions. The model formulation, referred to as the Wood Decomposition Model, or WDM, related these losses to (i) mean annual precipitation, mean monthly January and July air temperatures, and (ii) mean annual actual evapotranspiration (AET) at each location. The resulting calibrations conformed well to the time-in-field averages for mass remaining by location: R² = 0.83 and 0.90 for the lower and upper parts, respectively. These values dropped, respectively, to 0.41 and 0.55 for the N concentrations, and to 0.28 and 0.43 for N remaining. These reductions likely refer to error propagation and to as yet unresolved variations in N transference into and out of the wood specific to each individual dowel location. Recalibrating the model parameters by ecosystem type reduced the R² values for actual versus best-fitted mass loss by about 0.15. Doing the same without location- or ecosystem-specific adjustments reduced the R² values further, by about 0.3.     

Environmental and health impacts of spraying COVID-19 disinfectants with associated challenges

Environmental Science and Pollution Research - Coronavirus refers to a group of widespread viruses. The name refers to the specific morphology of these viruses because their spikes look like a...     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.     

Correction to: Ecotoxicological assessment of oil-based paint using three-dimensional multi-species bio-testing model: pre- and post-bioremediation analysis

Environmental Science and Pollution Research - The original publication of this paper contains a mistake.