MODELING HYDROLOGIC IMPACT OF WITHDRAWING THE GREAT LAKES WATER FOR AGRICULTURAL IRRIGATION1

ABSTRACT: Growing interest in agricultural irrigation in the Great Lakes basin presents an increasing competition to other uses of Great Lakes water. This paper, through a case study of the Mud Creek Irrigation District in the Saginaw Bay basin, Michigan, evaluates the potential hydrologic effects of withdrawing water for agricultural irrigation to the Great Lakes. Crop growth simulation models for corn, soybeans, dry beans, and the FAO Penman method were used to estimate the difference in evapotranspiration rates between irrigated and nonirrigated identical crops, based on climate, soil, and management data. The simulated results indicate that an additional 70–120 mm of water would be evapotranspirated during the growing season from irrigated crop fields as compared to nonirrigated identical plantings. Dependent upon the magnitude of irrigation expansion, an equivalent of about 1 to 5 mm of water from Lakes Huron-Michigan could be lost to the atmosphere. If agricultural irrigation further expands in the entire Great Lakes basin, the aggregated potential of water loss to the atmosphere through ET from all five Great Lakes would be even greater.     

河流水质灾害中的S—P方程稳态分析和临界氧亏计算

污染物对水环境的影响主要发生在枯水期，此时水流状态处于稳态．Streeter－phelps（S－P）方程能预测简单稳态条件下的水质状况，并具有较高的计算织亏的精度．     

1978—1994年分省农业旱灾灾情的经验正交函数EOF分析

本文利用１９７８～１９９４年各省、市、自治区的农业旱灾受灾面积及播种面积的资料，以旱灾受灾率（即旱灾受灾面积与播种面积之比）作为刻划旱灾灾情的指标。对标准化的旱灾受灾率进行经验正交函数分析，发现前五个典型场方差贡献达７０．７％，可以概括我国旱灾灾情的空间分布主要类型。其中，前三个典型场的正负区域分界线的大体位置分别为长城一线、秦淮线和江南丘陵北缘     

污水处理厂污泥减量技术研究

本文介绍了污泥减量、热水解和干化等处理技术，以及国内具有代表性的污水处理厂的污泥处理工艺情况。     

紫外分光光度法在处理废水中的应用

根据二沉池出水特点，指出了以260nm紫外光(F260)评价处理二沉池出水的理论依据，然后确定了E260与COD的关系式为：E260=0．008COD 0．083。最后以E260为评价指标，比较了3种无饥混凝剂在不同pH值条件下对城市二沉池出水的COD去除效果，确定了最佳混凝剂为三氯化铁(FC)及混凝条件：pH4．5，投药量Fe^3 为32mg/L。     

外委施工人员的安全现状分析及对策

从外委施工人员的从业特点和职业伤害方面，分析了其安全现状，并提出了相应的防治对策。     

尿中氚水和总氚的分析测定

用蒸馏-液闪法和氧化蒸馏-液闪法分别测量了氚污染人员尿中的氚水浓度和总氚(氚水和有机氚)浓度。根据72个高于本底水平的尿中氚水和总氚浓度分析比较，认为在氚内污染工作人员的尿中，有机氚与氚水的浓度比值为(5.4 3.7)％。     

Erratum to: Accumulation of Cr,Cd, Pb,Cu, and Zn by plants in tanning sludge storage sites: opportunities for contamination bioindication and phytoremediation

Environmental Science and Pollution Research -     

Research status,challenges and future prospects of renewable synthetic fuel catalysts for CO2 photocatalytic reduction conversion

Environmental Science and Pollution Research - In recent years, with global climate change, the utilization of carbon dioxide as a resource has become an important goal of human society to achieve...     

Pyrolysis technologies for municipal solid waste: A review

Pyrolysis has been examined as an attractive alternative to incineration for municipal solid waste (MSW) disposal that allows energy and resource recovery; however, it has seldom been applied independently with the output of pyrolysis products as end products. This review addresses the state-of-the-art of MSW pyrolysis in regards to its technologies and reactors, products and environmental impacts. In this review, first, the influence of important operating parameters such as final temperature, heating rate (HR) and residence time in the reaction zone on the pyrolysis behaviours and products is reviewed; then the pyrolysis technologies and reactors adopted in literatures and scale-up plants are evaluated. Third, the yields and main properties of the pyrolytic products from individual MSW components, refuse-derived fuel (RDF) made from MSW, and MSW are summarised. In the fourth section, in addition to emissions from pyrolysis processes, such as HCl, SO₂ and NH₃, contaminants in the products, including PCDD/F and heavy metals, are also reviewed, and available measures for improving the environmental impacts of pyrolysis are surveyed. It can be concluded that the single pyrolysis process is an effective waste-to-energy convertor but is not a guaranteed clean solution for MSW disposal. Based on this information, the prospects of applying pyrolysis technologies to dealing with MSW are evaluated and suggested.