Locomotion versus spawning: escape responses during and after spawning in the scallop Argopecten purpuratus

The energetic cost of spawning and the endogenous factors that modulate spawning could modify escape response performance, leading to a conflict between the requirements of two fundamental components of fitness: reproduction and survival. We examined whether spawning changed force production during escape responses by the functionally hermaphroditic scallop, Argopecten purpuratus, and whether the response of smooth (tonic) and striated (phasic) muscles differed. Force production during escape responses by mature scallops was compared before induction of spawning, during spawning and after completion of spawning. Maximum tonic force and the area under the force curve (total force recorded) were diminished during gamete release, whereas phasic force production (maximum and mean force) increased after spawning was completed. The number and frequency of phasic contractions did not change during the spawning process, suggesting that spawning did not limit fuel availability for phasic contractions. The decrease in tonic force during spawning and the increased phasic force production after spawning may reflect changes in monoamine levels during gamete release. Whereas the spawning process modified force production during escape responses, the changes would, if anything, enhance escape performance during an initial encounter between a scallop and a predatory sea star.     

Thermophilic adaptation of a mesophilic anaerobic sludge for food waste treatment

As opposed to mesophilic, thermophilic anaerobic digestion of food waste can increase the biogas output of reactors. To facilitate the transition of anaerobic digesters, this paper investigated the impact of adapting mesophilic sludge to thermophilic conditions. A 5L bench scale reactor was seeded with mesophilic granular sludge obtained from an up-flow anaerobic sludge blanket digester. After 13 days of operation at 35 degrees C, the reactor temperature was instantaneously increased to 55 degrees C and operated at this temperature until day 21. The biomass was then fed food waste on days 21, 42 and 63, each time with an F/M (Food/Microorganism) ratio increasing from 0.12 to 4.43 gVS/gVSS. Sludge samples were collected on days 0, 21, 42 and 63 to conduct substrate activity tests, and reactor biogas production was monitored during the full experimental period. The sludge collected on day 21 demonstrated that the abrupt temperature change had no pasteurization effect, but rather lead to a biomass with a fermentative activity of 3.58 g Glucose/gVSS/d and a methanogenic activity of 0.47 and 0.26 g Substrate/gVSS/d, related respectively, to acetoclastic and hydrogenophilic microorganisms. At 55 degrees C, an ultimate gas production (Go) and a biodegradation potential (Bo) of 0.2-1.4 L(STP)/gVS(fed) and of 0.1-0.84 L(STP) CH(4)/gVS(fed) were obtained, respectively. For the treatment of food waste, a fully adapted inoculum was developed by eliminating the initial time-consuming acclimatization stage from mesophilic to thermophilic conditions. The feeding stage was initiated within 20 days, but to increase the population of thermophilic methanogenic microorganisms, a substrate supply program must be carefully observed.     

Approaches for quantifying reactive and low-volatility biogenic organic compound emissions by vegetation enclosure techniques - part B: applications

The focus of the studies presented in the preceding companion paper (Part A: Review) and here (Part B: Applications) is on defining representative emission rates from vegetation for determining the roles of biogenic volatile organic compound (BVOC) emissions in atmospheric chemistry and aerosol processes. The review of previously published procedures for identifying and quantifying BVOC emissions has revealed a wide variety of experimental methods used by various researchers. Experimental details become increasingly critical for quantitative emission measurements of low volatility monoterpenes (MT) and sesquiterpenes (SQT). These compounds are prone to be lost inadvertently by uptake to materials in contact with the sample air or by reactions with atmospheric oxidants. These losses become more prominent with higher molecular weight compounds, potentially leading to an underestimation of their emission rates. We present MT and SQT emission rate data from numerous experiments that include 23 deciduous tree species, 14 coniferous tree species, 8 crops, and 2 shrubs. These data indicate total, normalized (30 degrees C) basal emission rates from <10 to 5600ngCg(-1)h(-1) for MT, and from <10 to 1150ngCg(-1)h(-1) for SQT compounds. Both MT and SQT emissions have exponential dependencies on temperature (i.e. rates are proportional to e(betaT)). The inter-quartile range of beta-values for MT was between 0.12 and 0.17K(-1), which is higher than the value commonly used in models (0.09K(-1)). However many of the MT emissions also exhibited light dependencies, making it difficult to separate light and temperature influences. The primary light-dependent MT was ocimene, whose emissions were up to a factor of 10 higher than light-independent MT emissions. The inner-quartile range of beta-values for SQT was between 0.15 and 0.21K(-1).     

Approaches for quantifying reactive and low-volatility biogenic organic compound emissions by vegetation enclosure techniques - part A

The high reactivity and low vapor pressure of many biogenic volatile organic compounds (BVOC) make it difficult to measure whole-canopy fluxes of BVOC species using common analytical techniques. The most appropriate approach for estimating these BVOC fluxes is to determine emission rates from dynamic vegetation enclosure measurements. After scaling leaf- and branch-level emission rates to the canopy level, these fluxes can then be used in models to determine BVOC influences on atmospheric chemistry and aerosol processes. Previously published reports from enclosure measurements show considerable variation among procedures with limited guidelines or standard protocols to follow. This article reviews this literature and describes the variety of enclosure types, materials, and analysis techniques that have been used to determine BVOC emission rates. The current review article is followed by a companion paper which details a comprehensive enclosure technique that incorporates both recommendations from the literature as well as insight gained from theoretical calculations and practical experiences. These methods have yielded new BVOC emission data for highly reactive monoterpenes (MT) and sesquiterpenes (SQT) from a variety of vegetation species.     

LCA to Evaluate the Environmental Impact for Chemical Pre-treatment in Plastics Metallization

The life cycle assessment methodology was used to calculate the environmental impacts of the current chemical pre-treatment with chromium(VI) for electroplating acrylonitrile butadiene styrene. The inventory comprised: the procurement of chemicals; the manufacturing process with successive baths and rinses that requires, in addition to chemicals, energy to heat baths, air agitation, filtration, and so forth, wastewater treatment and air emissions; and also the treatment of sludges from wastewater treatment and exhausted baths. Chromic acid was almost the unique responsible of eco-toxicity (97.5 %) and human toxicity-cancer (99.8 %) and it was one of the highest contributor to climate change, cumulative energy demand, fossil fuel depletion, human toxicity non-cancer, and in abiotic depletion.     

Persistent toxic substances in soils and waters along an altitudinal gradient in the Laja River Basin, Central Southern Chile

In this study the levels and distribution of some persistent toxic substances (PTS) were investigated in soils, superficial water, and snow along an altitudinal gradient in the Laja River Basin (South Central Chile). The principal objective was to establish the basin's contamination status. The working hypothesis was that PTS levels and distribution in the basin are dependent on the degree of anthropogenic intervention. Fifteen PAHs, seven PCBs congeners, and three organochlorine pesticides were studied in superficial soil and water samples obtained along the altitudinal gradient and from a coastal reference station (Lleu-Lleu River). Soil samples were extracted using accelerated solvent extraction with acetone/cyclohexane (1:1) for PAHs and organochlorine compounds. Contaminants were extracted from water and snow samples by liquid-liquid extraction (LLE). PAH and organochlorine compound quantification was carried out by HPLC with fluorescence detection and GC-MS, respectively. PCBs in soils presented four different profiles in the altitudinal gradient, mainly determined by their chlorination degree; these profiles were not observed for the chlorinated pesticides. In general, the detected levels for the analyzed compounds were low for soils when compared with soil data from other remote areas of the world. Higher summation operator PAHs levels in soils were found in the station located at 227 masl (4243 ng g-1 TOC), in a forestry area and near a timber industry, where detected levels were up to eight times higher than the other sampling sites. In general, PAH levels and distribution seems to be dependent on local conditions. No pesticides were detected in surface waters. However, congeners of PCBs were detected in almost all sampling stations with the highest levels being found in Laja Lake waters, where 1.1 ng/l were observed. This concentration is two times higher than values reported for polluted lakes in the Northern Hemisphere. The presence of organochlorine compound in snow sampled at the highest elevation point of the basin is indicative of the transport and atmospheric deposition phenomena of alpha-HCH, gamma-HCH and PCB 52, with values being similar to the levels reported in Canadian snow samples. We conclude that environmental PTS substance levels are in general relatively low, although PAHs may be of concern in some areas of the basin.     

Natural and anthropogenic radionuclides in airborne particulate samples collected in Barcelona (Spain)

Results for naturally occurring ⁷Be, ²¹⁰Pb, ⁴⁰K, ²¹⁴Bi, ²¹⁴Pb, ²¹²Pb, ²²⁸Ac and ²⁰⁸Tl and anthropogenic ¹³⁷Cs in airborne particulate matter in the Barcelona area during the period from January 2001 to December 2005 are presented and discussed. The ²¹²Pb and ²⁰⁸Tl, ²¹⁴Bi and ²¹⁴Pb, ⁷Be and ²¹⁰Pb radionuclide levels showed a significant correlation with each other, with correlation coefficients of 0.99, 0.78 and 0.69, respectively, suggesting similar origin/behaviour of these radionuclides in the air. Caessium-137 and Potassium-40 were transported to the air as resuspended particle from the soil. The ⁷Be and ²¹⁰Pb concentrations showed similar seasonal variations, with a tendency for maximum concentrations during the summer months. An inverse relationship was observed between the ⁷Be, ²¹⁰Pb, ⁴⁰K and ¹³⁷Cs concentrations and weekly rainfall, indicating washout of atmospheric aerosols carrying these radionuclides.     

Integrated pollution evaluation of the Tagus River in Central Spain

The aim of this study was to integrate hydrochemical and sediment data in order to obtain a picture of the pollution state of the Tagus River along central Spain. This area is of special interest because tributaries from the Madrid region are discharged and no previous data were available. Waters and sediments were sampled between 2002 and 2004 from selected sites before and after Jarama River confluence (Madrid city input). The samples were analysed for more than 50 parameters, including those of physico-chemical nature and those reporting the pollution caused by both metals and organic compounds. The quality of waters for different uses has been tested and statistical quality indexes of both global and partial type has also been established. Sediments pollution state was evaluated by comparison with general quality standards. A high degree of pollution and general degradation was observed in the Tagus River downstream the Jarama River input. The pollution of waters is mainly related to parameters indicators of organic pollution from urban sewage. In sediments, a dramatic increase in the concentration of trace metals was found in different points, exceeding toxicological threshold. Further studies would be necessary for organic pollutants and also to evaluate the remobilization potential.     

Sustainability assessment of large-scale ethanol production from sugarcane

The present study assesses the sustainability of ethanol produced from sugarcane and examines the environmental feasibility of a large-scale production through the use of: fossil fuel embodied energy and Emergy Assessment including farm and industrial production phases. The study indicates that about 1.82 kg of topsoil eroded, 18.4 l of water and 1.52 m² of land are needed to produce 1 l of ethanol from sugarcane. Also, 0.28 kg of CO₂ is released per liter of ethanol produced. The energy content of ethanol is 8.2 times greater than the fossil-based energy required to produce it. The transformity of ethanol is about the same as those calculated for fossil fuels. The Renewability of ethanol is 30%, a very low value; other emergy indices indicate important environmental impacts as well as natural resources consumption. The results obtained indicate that sugarcane and ethanol production present low renewability when a large-scale system is adopted.     

Effect of antimony in soils of an Sb mine on the photosynthetic pigments and antioxidant system of Dittrichia viscosa leaves

Environmental Geochemistry and Health - Antimony is a toxic element whose concentration in soil and water has been rising due to anthropogenic activities. This study focuses on its accumulation in...