Immunologic effects of perinatal exposure to dioxins, PCBs and organochlorine pesticides in Japanese infants

Effects of perinatal exposure to dioxins, PCBs and organochlorine pesticides on lymphocyte subsets were investigated in the peripheral blood from 101 Japanese infants with approximately 10 months of age. Perinatal exposure to these organochlorine compounds were estimated by their contamination levels in the breast milk of the mothers. Lymphocyte subsets such as CD16+, HLA-DR+, CD4+, CD4+8+, CD8+, CD3+ and CD20+ cells in peripheral venous blood were assessed in a subgroup of 92 infants. Greater exposures to HCE, chlordane and dioxins were significantly associated with the increase in the percentages of CD8+ and CD3+ T lymphocytes and CD4+/CD8+ T cell ratios, respectively. In addition, higher HCH exposure was also associated with a decrease in the percentage of HLA-DR+ T lymphocytes. Furthermore effects of dioxins, DDT and PCBs on the percentage of CD16+ T lymphocyte were more pronounced by the combined exposure of dioxins and PCBs or by the combined exposure of DDT and PCBs. Effects of HCE on the percentages of CD8+ T lymphocyte were also more pronounced by the combined exposure of HCE and chlordane. In conclusion, our study suggests that greater exposures to dioxins, PCBs and organochlorine pesticides determined in this study (except dieldrin) influence the immune system of Japanese infant, although the clinical significance of these changes is uncertain.     

Atmospheric concentrations of nitric acid, sulfur dioxide, particulate nitrate and particulate sulfate, and estimation of their dry deposition on the urban- and mountain-facing sides of Mt. Gokurakuji, Western Japan

Atmospheric concentrations of nitric acid (HNO₃), sulfur dioxide (SO₂), particulate nitrate and particulate sulfate on the urban- and mountain-facing sides of Mt. Gokurakuji were measured from November 2002 to October 2003, in order to evaluate the effects of anthropogenic activity on air quality and dry deposited nitrate and sulfate on the surfaces of pine foliage. The results showed that HNO₃, SO₂ and concentrations were significantly higher (P < 0.05) on the urban-facing side (1.54, 2.48 and 0.65 μg m⁻³, respectively) than the mountain-facing side (0.67, 1.19 and 0.37 μg m⁻³, respectively), while concentrations did not differ significantly between the two sides (urban-facing: 2.80 μg m⁻³; mountain−facing: 2.05 μg m⁻³). Indirect estimates of dry deposition rates of nitrate and sulfate to the surfaces of pine foliage based on the measured concentrations approximately agreed with the measured values determined by the foliar rinsing technique in a previous study. It was found that HNO₃ was the major source (approximately 80%) of dry deposited nitrate on pine foliage, while the contribution from was about equal to that from SO₂. In conclusion, HNO₃ and SO₂ appear to be dominant species reflecting higher dry deposition rates of nitrate and sulfate on the urban-facing side compared to the mountain-facing side of Mt. Gokurakuji.     

Effects of buoyancy, transparency and zooplankton feeding on surface maxima and deep maxima: Comprehensive mathematical model for vertical distribution in cyanobacterial biomass

Inhomogeneous vertical distributions of the cyanobacterial biomass are widely observed during the summer season in stratified lake ecosystems. Among these are surface maxima characterized by surface scum formation and deep or subsurface maxima also known as deep chlorophyll maxima (DCM). The former occurs at the epilimnion in eutrophic lakes, and are usually caused by colonial cyanobacteria such as Microcystis. On the other hand, the latter occurs at the metalimnion and the upper part of the hypolimnion near the thermocline in oligotrophic lakes, and are referred to filamentous cyanobacteria such as Oscillatoria. The aim of this paper is to present a simple mathematical model that can simultaneously describe these phenomena including the annual and diurnal variations, emphasizing the roles of buoyancy regulation, transparency of the lake and zooplankton feeding on cyanobacteria. According to our computer analyses, the increased buoyancy, the low clarity of the lake and the low rate of zooplankton feeding take significant roles in formation of surface maxima, while the reversal of these factors makes deep maxima predominant. Our two-component model with nutrients and cyanobacteria can distinguish between two phenomena by changing the parameters for these factors, without altering the model itself.     

Decomposing detonation and deflagration properties of ozone/oxygen mixtures

In this study, the decomposing detonation and deflagration properties of ozone/oxygen mixtures of up to 20 vol.% of ozone in oxygen under high pressure of up to 1.0 MPa in a tube were experimentally investigated. The mixtures were ignited by an electric spark at the end of the tube. Flame propagation properties such as flame velocity and pressure were measured with thermocouples and piezo electric transducers mounted along the tube. Slow and constant flame propagation profiles were obtained. We also investigated the quenching ability of a wire gauze as well as the concentration limit for flame propagation. However, in spite of slow flame propagation velocity and easy flame quenching properties under these experimental conditions, direct initiation of detonation by the driver detonation of the stoichiometric oxy-hydrogen mixture was easily achieved at much lower concentrations than the limit of deflagration. The observed detonation properties, such as wave velocity and pressure, agreed fairly well with C–J calculated values. The detonation velocity (900–1200 m/s) and the pressure ratio to initial pressures (5–9.5) were not affected by the initial pressure of the mixtures. Near the detonation limit, typical spinning detonations with oscillatory pressure waves were observed.     

Identification and behavior of reaction products formed by chlorination of ethynylestradiol

Six products were formed by reaction of ethynylestradiol (EE2) with sodium hypochlorite in buffered solutions. 4-Chloroethynylestradiol (4-ClEE2) and 2,4-dichloroethynylestradiol (2,4-diClEE2) were identified as the two major reaction products, using preparative HPLC, MS, and NMR. When EE2 reacted with chlorine at different pHs (pH 5, 7, and 9) or chlorine concentrations (0.2, 1, 2, and 5 mmol/l, corresponding to molar ratios to EE2, 1, 5, 10, and 25, respectively), the formation of 4-ClEE2 and 2,4-diClEE2 was observed under the above conditions, and the highest yields were 20 and 52 mol%, respectively. EE2 was consumed almost completely within 5 min of chlorination by addition of chlorine of more than 1 mmol/l (molar ratio to EE2, 5). On the other hand, the two products existed in highly chlorinated solutions after 60 min (4ClEE2, 1-6 mol%; 2,4-diClEE2, 3-25 mol%). The estrogenic activities of 4-ClEE2 by estrogen receptor alpha or beta binding assay were similar to those of the parent EE2, and the activities of 2,4-diClEE2 were lower about 10 times.     

Scenario assessment of neodymium recycling in Japan based on substance flow analysis and future demand forecast

With the increasing demand for energy-saving technologies, neodymium-iron-boron magnets have been widely utilized in high-efficiency motors. However, the reserves of neodymium, which is a rare earth element (REE), are limited; thus, a strategy for scaling up the REE supply is highly required. In this study, a scenario assessment was conducted to evaluate the effect of material recycling of neodymium from final product waste. Domestic substance flow analysis of neodymium was conducted by focusing on the waste flow of the final product. Moreover, the demand and waste of neodymium until 2050 were forecasted using various multivariate analysis methods. The results showed that the domestic waste of neodymium was forecasted to be 3866–4217 tons/year by 2050. However, material recycling of neodymium from final product waste may cause an additional increase in production by “circular economy rebound”. Considering that CO₂ reduction has also been a global challenge to prevent global warming, the rebound effect was calculated. Therefore, a scenario assessment was conducted to evaluate the influence of this rebound effect by estimating the CO₂ reduction. The results of this study are expected to make a significant contribution to the establishment of a new strategy for neodymium recycling.

     

Influence of oxygen flow rate and compost addition on reduction of organic matter in aerated waste layer containing mainly incineration residue

Landfilling municipal solid waste incineration (MSWI) residue alkalizes the waste layer, causing a subsequent decrease in microbial activity and a delay in the decomposition of organic matter. In this study, efficiencies of neutralization of the leachate and organic matter decomposition in the waste layer in a column filled with MSWI residue using aeration and compost addition were evaluated.Total organic carbon (TOC) reduction in the waste layer is large at high oxygen flow rate (OFR). To effectively accelerate TOC reduction in the waste layer to which compost was added, a high OFR exceeding that by natural ventilation was required. At day 65, the pH of the leachate when OFR was above 102mol-O2/(day·m3) was lower than that when OFR was below 101mol-O2/(day·m3). At the same OFR, the pH of waste sample was lower than that of waste sample with compost. Although leachate neutralization could be affected by compost addition, TOC reduction in the waste layer became rather small. It is possible that humic substances in compost prevent the decomposition of TOC in MSWI residue.     

Micro fabrication on cylinder surface for control of wettability

A micro fabrication is presented to control wettability on cylinder surfaces. A machine tool is developed to form the micro-scale structure on the cylinder in incremental stamping. The stamping tool is manufactured with fabricating the micro-scale structure on the top of the tool in FIB sputtering. The micro incremental stamping is repeated with linear motion of the tool and rotation of the workpiece. The rotation is controlled by the friction drive on the machine table because of the stable stamping with reducing bending of the workpiece. The critical stamping depth, the minimum depth in which the structure is formed, is determined in the forming tests using the structured tool. Then, a stripe type structure is formed to control wettability on the cylinder surface. Anisotropic wettability appears on the structured surface.     

Photodegradation mechanism for bisphenol A at the TiO2/H2O interfaces

Bisphenol A (BPA) can be decomposed photocatalytically under UV-illumination in aqueous TiO2 dispersion. The two methyl groups in BPA were initially attacked with .OH and/or .OOH radicals having strong oxidizing power, followed by the cleavage of the two phenyl moieties. Finally, the photomineralization to CO2 gas occurred via oxidative processes involving carboxylic acids and aldehydes. The decomposition of structurally similar substances of 4,4'-ethylidenebisphenol (EBP) and 4,4'-methylenebisphenol (MBP) was compared. The decomposition of BPA gave more kinds of intermediates such as 4-isopropylphenol, 4-ethylphenol, etc. On the other hand, that of EBP gave mainly 4-isopropylphenol and that of MBP gave a predominant product of 4-hydroxybenzaldehyde. These photooxidative pathways were proposed on the base of the evidence of oxidative intermediate formation.