Concentrations of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and polychlorinated biphenyls in blood and breast milk collected from pregnant women in Sapporo City, Japan

We measured the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (PCBs), and non-dioxin-like PCBs in paired samples of blood and breast milk collected from 67 secundiparas in Sapporo City, Japan, and combined this data with those of the 30 secundiparas previously measured. The arithmetic mean total toxic equivalents (TEQ-WHO) concentrations of PCDDs, PCDFs, non-ortho PCBs, and mono-ortho PCBs in blood and breast milk of the 97 secundiparous subjects were 3.0-23 (mean: 13, median: 14) and 2.7-20 (mean: 8.6, median: 8.5) pg TEQ g⁻¹ lipid, respectively. The sums of the concentrations of 56 non-dioxin-like PCB congeners that were measured in the subjects’ blood and breast milk were 16-326 (mean: 107, median: 100) and 12-252 (mean: 73, median: 67) ng g⁻¹ lipid, respectively. The partitioning ratios of individual congeners of PCDDs, PCDFs, dioxin-like PCBs, and non-dioxin-like PCBs from blood to breast milk in secundiparas were almost the same as those of primiparas that have been recently reported, suggesting that the partitioning ratios of these compounds from maternal blood to breast milk in women is little affected by delivery. Furthermore, the partition of PCB congeners with chlorine at the 2-, 3-, 4′-, and 5-positions or the 2-, 4-, 4′-, and 5-positions of the biphenyl ring from the blood to the breast milk tended to occur at a higher level than that of other congeners. In particular, the levels of tetraCB-74 and hexaCB-146 in the breast milk for both primiparous and secundiparous mothers were slightly higher than those in the blood.     

Optimization of separation and logistics for recycling materials from wallpaper hanging sites

It is of huge importance for sustainability to find a pragmatic solution for recycling of a variety of wastes emitted in small mass such as the case of wallpaper replacements. A combination of two-step sorting scheme and transportation of the wastes in collaboration with the wholesalers was proposed to enhance the efficiency of recycling. The two-step sorting consists of the first sorting at the wallpaper hanging sites to separate and group wastes in a way to avoid heavy additional burden on the hanging job. Secondary sorting is conducted at a Sorting Center to re-group wastes to send to an intermediate processing company for recycling. To minimize the costs for transportation, the grouped wastes emitted at the hanging sites are brought back by the hangers and kept temporally and then moved to the wholesaler(s) on the way to receive new materials. When the wastes at the wholesaler(s) become sufficiently large for economic transportation, a truck is arranged to collect the wastes to transport them to the Sorting Center. A feasibility study to test the practicality of the method confirmed that it could be operable and the cost would be comparable or lower than that currently incurred for disposal of the wastes.     

Analysis method for PCBs in reclaimed oil using a fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method

It is necessary for companies supplying reclaimed oil to analyze polychlorinated biphenyls (PCBs), because there is a possibility of the presence of contaminants due to trace-level PCBs in the reclaimed oil. However, common analysis methods of PCBs are time-consuming and complicated. Fast-GC triple stage quadrupole mass spectrometer with the 13-component quantitation method is an official method for analyzing PCBs in insulating oil in Japan. This method is extremely fast and simplified. The purpose of this study involves an investigation of the aforementioned fast and simple method for potential use in the analysis of reclaimed oil. Furthermore, it was attempted to combine the method with sample preparation involving only hexane dilution. The effect of sample dilutions corresponding to 100, 300, and 500 times was evaluated for reducing the matrix effect. The matrix effect was suppressed at a dilution ratio equal to or exceeding 300 times. Calibration curves of four points, namely 0.01, 0.05, 0.1, and 0.5 ng/mL, (ignored origin) by using an internal standard method were prepared for the 13 components. The square of regression coefficient (R²) values of all calibration curves exceeded 0.997. This method was adopted for the analysis of reclaimed oil containing 0.5 μg/mL PCBs, which corresponds to the judgment criteria, and accurate quantitation (accuracy value, 94.0–102%) and good repeatability (%RSD, 3.6%) were obtained. Furthermore, the required sensitivity was maintained even when 800 samples were analyzed without a cleaning ion source and an exchanging analysis column.     

Evaluation of operational parameters in thermophilic acid fermentation of kitchen waste

In this study, the effect of operational parameters, such as solids retention time (SRT), pH, and substrate total solids (TS) concentration, on acid fermentation efficiency was investigated. From batch tests, it was shown that the appropriate pH range for thermophilic acidogens was around 6–7 and that the optimum pH condition was 6. From the continuous experiment, pH and SRT were shown to be the most important operational parameters for solubilization and organic acid production. In contrast, TS concentration did not show any obvious effect on chromium chemical oxygen demand (CODcr) solubilization when TS was in the range 3.5%–10%. The optimum operational conditions for thermophilic acid fermentation were an SRT of 2 days and a pH of 6. This research was carried as a part of the CREST project of Japan Science and Technology Agency.     

PCDDs/PCDFs and dioxin-like PCBs: recent body burden levels and their determinants among general inhabitants in Japan

OBJECTIVE: The objective was to grasp the recent body burden levels of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and dioxin-like polychlorinated biphenyls (DL-PCBs) and to investigate their determinants among general inhabitants in Japan. METHODS: This study was performed on 1374 participants aged 15-73 years, who were not occupational exposure to PCDDs/PCDFs and DL-PCBs, living widely in 75 different residential areas of 25 prefectures in Japan. Seven PCDDs, ten PCDFs, twelve DL-PCBs, which are assigned a toxicity equivalent factor, and biochemical factors were determined in fasting blood. A questionnaire survey on life-style was also performed. RESULTS: The median of total toxicity equivalent (TEQ) was 20pgTEQ/g lipid. The TEQs of PCDDs/PCDFs, DL-PCBs and total TEQ increased with age. The intake frequency of fish-and-shellfish was positively associated with the TEQ of DL-PCBs in both sexes. Current smoking was negatively related to the TEQ of DL-PCBs in male subjects but not in female subjects. Feeding status was significantly related to the TEQs of PCDDs/PCDFs, DL-PCBs and total TEQ, being lowest in breast feeding and highest in never and bottle feeding. According to the results of subgroup analysis, parity was not associated with the TEQs. CONCLUSIONS: The fish-and-shellfish consumption may contribute to the accumulation of DL-PCBs, and smoking may induce some biological action for the elimination of DL-PCBs from the human body. Breast feeding is considered to be one of the major excretory pathways of PCDDs/PCDFs and DL-PCBs in women, while parity may not largely contribute to the elimination of these pollutants.     

Evaluating the strength development of mortar using clinker fine aggregate with a combination of fly ash and its inhibitory effects on alkali–silica reaction and delayed ettringite formation

The aggregate composed of cement clinker, an intermediate cement product, improves strength development and mass transfer resistance of concrete. Fly ash (FA) is a supplementary cementitious material that can be substituted by cement. This study investigated the strength development of highly FA-substituted mortar mixed with cement clinker fine aggregate (CL) and tested its inhibitory effect against the alkali–silica reaction (ASR). In addition to these, this study provides the testing results of evaluating the effects of using cement clinker fine aggregate on delayed ettringite formation (DEF), which can be problematic for precast concrete products. The study results revealed that at 91 days of age, in the case of 80% replacement ratio of fly ash to cement, using CL exhibited similar strength development as mortar with limestone fine aggregate and no FA substitution. Furthermore, mortars with 70% and 80% FA substitution did not exhibit clear ASR-induced expansion even at 182 days of age. Lastly, mortar using clinker fine aggregate could suppress DEF-induced expansion at 182 days of age, which was similar to the effect obtained using FA. These results can promote the utilization of CL resources for concrete and using clinker as fine aggregate in precast concrete products.

     

Verification of the mutually complementary effect of fly ash and clinker aggregate on the strength,heat of hydration,and alkali-silica reaction

Journal of Material Cycles and Waste Management - Although fly ash, as used for supplementary cementitious material in Portland cement concrete, can reduce the heat of hydration and suppress the...