Fecal source tracking based on fecal coliform concentration and bacterial community structure in the Bong stream,Korea

Environmental Science and Pollution Research - Fecal source tracking of the Bong stream, a representative inland pollutant around the drainage basin of Gangjin Bay (an area where shellfish are...     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Effects of cement on redistribution of trace metals and dissolution of organics in sewage sludge and its inorganic waste-amended products

The suitability of using cement-stabilized sludge products as artificial soils in earth works was evaluated. The sludge products investigated were cemented sludge, cement-treated clay-amended sludge (SS+MC), and cement-treated copper slag-amended sludge (SS+CS). The leachability of lead (Pb), zinc (Zn), copper (Cu), and chromium (Cr) were assessed using the sequential extraction technique, toxicity characteristic leaching procedure (TCLP), NEN 7341 availability test, and column leaching test. The results indicated that Zn leachability was reduced in all the cement-stabilized sludge products. In contrast, Cu was transferred from the organic fraction to the readily leachable phases in the cement-stabilized sludge products and therefore exhibited increased leachability. The increased Cu leachability could be attributed to dissolution of humic substances in the sludge as a result of elevated pH. Good correlation between dissolved organic carbon (DOC) and heavy metal leaching from the cement-stabilized sludge products was observed in the column leaching experiment. Even with a cement percentage as small as 12.5%, calcium silicate hydrate (C-S-H) was formed in the SS+MC and SS+CS products. Inclusion of the marine clay in the SS+MC products could reduce the leaching potentials of Zn, and this was the great advantage of the marine clay over the copper slag for sludge amendment.     

Environmental impact minimization of a total wastewater treatment network system from a life cycle perspective

Synthesis of distributed wastewater treatment plants (WTPs) has focused on cost reduction, but never on the reduction of environmental impacts. A mathematical optimization model was developed in this study to synthesize existing distributed and terminal WTPs into an environmentally friendly total wastewater treatment network system (TWTNS) from a life cycle perspective. Life cycle assessment (LCA) was performed to evaluate the environmental impacts of principal contributors in a TWTNS. The LCA results were integrated into the objective function of the model. The mass balances were formulated from the superstructure model, and the constraints were formulated to reflect real wastewater treatment situations in industrial plants. A case study validated the model and demonstrated the effect of the objective function on the configuration and environmental performance of a TWTNS. This model can be used to minimize environmental impacts of a TWTNS in retrofitting existing WTPs in line with cleaner production and sustainable development.     

Effect of operational factors on bioregeneration of binary phenol and 4-chlorophenol-loaded granular activated carbon using PVA-immobilized biomass cryogels

The effects of dry biomass density in cryogel beads, shaking speed and initial concentration ratio of phenol to 4-chlorophenol (4-CP) on the bioregeneration efficiencies of binary phenol and 4-CP-loaded granular activated carbon (GAC) for phenol and 4-CP, respectively, were investigated under the simultaneous adsorption and biodegradation approach. The results revealed higher bioregeneration efficiencies of binary-loaded GAC for phenol and 4-CP at higher dry biomass density but moderate shaking speed. The optimum dry biomass density in cryogel beads and shaking speed for use in bioregeneration were found to be 0.01 g/mL and 250 rpm, respectively. With respect to the initial phenol to 4-CP concentration ratio, the bioregeneration efficiencies were lower under increasing phenol and 4-CP initial concentrations, respectively, with the effect being more conspicuous under increasing 4-CP concentration. Higher bioregeneration efficiencies were achieved with the use of immobilized rather than suspended biomasses.     

Political transition and emergent forest‐conservation issues in Myanmar

Political and economic transitions have had substantial impacts on forest conservation. Where transitions are underway or anticipated, historical precedent and methods for systematically assessing future trends should be used to anticipate likely threats to forest conservation and design appropriate and prescient policy measures to counteract them. Myanmar is transitioning from an authoritarian, centralized state with a highly regulated economy to a more decentralized and economically liberal democracy and is working to end a long‐running civil war. With these transitions in mind, we used a horizon‐scanning approach to assess the 40 emerging issues most affecting Myanmar's forests, including internal conflict, land‐tenure insecurity, large‐scale agricultural development, demise of state timber enterprises, shortfalls in government revenue and capacity, and opening of new deforestation frontiers with new roads, mines, and hydroelectric dams. Averting these threats will require, for example, overhauling governance models, building capacity, improving infrastructure‐ and energy‐project planning, and reforming land‐tenure and environmental‐protection laws. Although challenges to conservation in Myanmar are daunting, the political transition offers an opportunity for conservationists and researchers to help shape a future that enhances Myanmar's social, economic, and environmental potential while learning and applying lessons from other countries. Our approach and results are relevant to other countries undergoing similar transitions.     

A novel strategy for gas mitigation during swine manure odour treatment using seaweed and a microbial consortium

• Comprehensive mitigation of gas emissions from swine manure was investigated. • Additives addition for mitigation of gas from the manure has been developed. • Sargassum horneri, seaweed masking strategy controlled gas by 90%-100%. • Immediate reduction in emitted gas and improving air quality has been determined. • Microbial consortium with seaweed completely controlled gas emissions by 100%. Gas emissions from swine farms have an impact on air quality in the Republic of Korea. Swine manure stored in deep pits for a long time is a major source of harmful gas emissions. Therefore, we evaluated the mitigation of emissions of ammonia (NH₃), hydrogen sulfide (H₂S) and amine gases from swine manure with biological products such as seaweed (Sargassum horneri) and a microbial consortium (Bacillus subtilis (1.2 × 10⁹ CFU/mL), Thiobacillus sp. (1.0 × 10¹⁰ CFU/mL) and Saccharomyces cerevisiae (2.0 × 10⁹ CFU/mL)) used as additives due to their promising benefits for nutrient cycling. Overall, seaweed powder masking over two days provided notable control of over 98%-100% of the gas emissions. Furthermore, significant control of gas emissions was especially pronounced when seaweed powder masking along with a microbial consortium was applied, resulting in a gas reduction rate of 100% for NH₃, amines and H₂S over 10 days of treatment. The results also suggested that seaweed powder masking and a microbial consortium used in combination to reduce the gas emissions from swine manure reduced odour compared with that observed when the two additives were used alone. Without the consortium, seaweed decreased total volatile fatty acid (VFA) production. The proposed novel method of masking with a microbial consortium is promising for mitigating hazardous gases, simple, and environmentally beneficial. More research is warranted to determine the mechanisms underlying the seaweed and substrate interactions.     

Strength,durability, and microstructure of self-compacting geopolymer concrete produced with copper slag aggregates

Environmental Science and Pollution Research - Lack of vibrations on fresh concrete negatively influences the compaction and thus the quality of concrete. This is particularly concerning with...