Occurrence of perfluorooctanoate and perfluorooctanesulfonate in the Korean water system: implication to water intake exposure

Perfluorinated compounds (PFCs) measured in surface running waters indicated the existence of different emission sources in eight main city basins. The tap water reflected the contamination pattern and levels in their corresponding source water basins. The daily intakes through tap water consumption ranged from <0.01 to 0.73 ng kg⁻¹ d⁻¹ for perfluorooctanoate (PFOA) and <0.01 to 0.08 ng kg⁻¹ d⁻¹ for perfluorooctanesulfonate (PFOS). Tap water intake-derived exposure accounted for 8.6%-101% (for PFOA) and while <10% (for PFOS) of total daily exposure, which was estimated from Korean serum concentrations using a pharmacokinetic model. Our findings indicate that tap water intake could be an important contributor to PFOA exposure in Korean populations; accordingly, additional efforts are necessary to improve the removal efficiency of perfluorinated compounds (PFCs) in the water purification process. However, more fundamentally the aim would be to reduce the discharge of PFCs from potential sources within the basin.     

Effects of anions on the kinetics and reactivity of nanoscale Pd/Fe in trichlorobenzene dechlorination

Influences of anionic co-solutes on dechlorination of 1,2,4-trichlorobenzene (124TCB) by the nanoscale Pd/Fe particles were investigated in batch experiments in the presence of an anionic solute such as nitrate, nitrite, perchlorate, phosphate, carbonate, silica, sulfate, sulfite, or sulfide. Based on the extent of inhibitory effects on the 124TCB dechlorination, the anions can be ranked in the order of: control≈sulfate≈silica相似文献   

Effects of cement on redistribution of trace metals and dissolution of organics in sewage sludge and its inorganic waste-amended products

The suitability of using cement-stabilized sludge products as artificial soils in earth works was evaluated. The sludge products investigated were cemented sludge, cement-treated clay-amended sludge (SS+MC), and cement-treated copper slag-amended sludge (SS+CS). The leachability of lead (Pb), zinc (Zn), copper (Cu), and chromium (Cr) were assessed using the sequential extraction technique, toxicity characteristic leaching procedure (TCLP), NEN 7341 availability test, and column leaching test. The results indicated that Zn leachability was reduced in all the cement-stabilized sludge products. In contrast, Cu was transferred from the organic fraction to the readily leachable phases in the cement-stabilized sludge products and therefore exhibited increased leachability. The increased Cu leachability could be attributed to dissolution of humic substances in the sludge as a result of elevated pH. Good correlation between dissolved organic carbon (DOC) and heavy metal leaching from the cement-stabilized sludge products was observed in the column leaching experiment. Even with a cement percentage as small as 12.5%, calcium silicate hydrate (C-S-H) was formed in the SS+MC and SS+CS products. Inclusion of the marine clay in the SS+MC products could reduce the leaching potentials of Zn, and this was the great advantage of the marine clay over the copper slag for sludge amendment.     

Theory and practice of EIA implementation: A comparative study of three developing countries

This article offers a conceptual framework for analyzing institutional processes and performance outcome of EIA implementation for developing countries. Eight classes of participants in the EIA process are identified: (1) responsible agency; (2) action proponent; (3) preparer; (4) review agency; (5) rule-setting agency; (6) concerned agencies; (7) general public; and (8) licensing agency. Five types of performance outcome are suggested that may follow the introduction of EIA into a national planning system. These include EIA as (1) a fully internalized element of the planning process, (2) a support for a position of advocacy for the environment, (3) a process of adjustment among conflicting goals, (4) a process to remedy prior environmental damage, and (5) a perfunctory endorsement of public or private actions. Using these categories, the EIA system of the Philippines, Korea, and Brazil are analyzed. Three aspects of EIA implementation are compared: national development planning and environmental goals; institutional structure; and performance evaluation. Based on this analysis, the author concludes that while EIA in developing countries is being hampered in its early stages by institutional factors, there are some specific policies that, if adopted by national governments and international aid agencies, would enhance the integration of EIA into the planning and decision-making process and make EIA a more effective tool for environmental protection in the developing world.     

Effect of lanthanum loading on nanosized CeO2-ZnO solid catalysts supported on cordierite for diesel soot oxidation

We report the application of a solid lanthanum–ceria–zinc catalyst in the catalytic regeneration of diesel particulate filters(DPF) in diesel engines.We synthesized a CeO_2–ZnO–La_2O_3(Ce–Zn–La) mixed oxide by a lactic acid-mediated sol–gel method,which efficiently coated cordierite substrates for soot capture and combustion.We studied the effects of La loading on the physicochemical and catalytic properties of Ce–Zn mixed oxide during lowtemperature soot combustion processes.We characterized the synthesized catalysts by X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FTIR),N2 adsorption,Raman spectroscopy,oxygen storage capacity(OSC),and scanning and transmission electron microscopy(SEM and TEM).Thermogravimetric and differential thermal analysis(TGA/DTA)confirmed that the catalysts effectively reduced the soot oxidation temperature.The ternary Ce–Zn–La mixed oxide catalyst with Ce/Zn/La atomic ratio of 2:1:0.5 had the highest catalytic activity and promoted soot oxidation at temperatures below 390°C.This indicated that the large number of oxygen vacancies in the catalyst structure generated oxygen species at low temperatures.Raman spectroscopy measurements revealed the presence of oxygen vacancies and lattice defects in Ce–Zn–La samples,which were key parameters concerning the stability and redox properties of the prepared catalysts.     

Forecasting land use change and its environmental impact at a watershed scale

Urban expansion is a major driving force altering local and regional hydrology and increasing non-point source (NPS) pollution. To explore these environmental consequences of urbanization, land use change was forecast, and long-term runoff and NPS pollution were assessed in the Muskegon River watershed, located on the eastern coast of Lake Michigan. A land use change model, LTM, and a web-based environmental impact model, L-THIA, were used in this study. The outcomes indicated the watershed would likely be subjected to impacts from urbanization on runoff and some types of NPS pollution. Urbanization will slightly or considerably increase runoff volume, depending on the development rate, slightly increase nutrient losses in runoff, but significantly increase losses of oil and grease and certain heavy metals in runoff. The spatial variation of urbanization and its impact were also evaluated at the subwatershed scale and showed subwatersheds along the coast of the lake and close to cities would have runoff and nitrogen impact. The results of this study have significant implications for urban planning and decision making in an effort to protect and remediate water and habitat quality of Muskegon Lake, which is one of Lake Michigan's Areas of Concern (AOC), and the techniques described here can be used in other areas.     

Biodegradable Corn Starch Loose-Fill. II. The Effect of Storage at Different Relative Humidities on the Physical Properties of Loose-Fill

The physical properties of corn starch loose-fill were examined at various relative humidities (r.h.). After 48 h of storage at both 25 and 50% r.h., only a slight change in the dimension and physical properties of the corn starch loose-fill was apparent. A wet environment (75% r.h. for 48 h), however, caused significant shrinkage and the loss of physical properties. The tensile properties, particularly tensile modulus, sharply increased, while the resilience gradually decreased with storage time. Amorphous X-ray diffraction patterns of corn starch loose-fills were transformed into crystalline patterns due to aging at 75% r.h. after 48 h. These changes were attributed to the structural relaxation, which was accelerated by moisture gain. The T _g of corn starch loose-fill decreased with increasing the moisture content in expanded starch. Our proposed model based on Avrami equation was able to describe the time-dependent recrystallization of corn starch by modifying the time-dependent tensile modulus. The growth parameter (n) and time constant (k) for the recrystallization process of corn starch loose-fill were about 3.2 and 8.87 × 10^–18 s^–1, respectively. If the growth parameter of 3.2 is considered, spherulitic growth of crystallization occurred in the corn starch loose-fill in the wet environment.     

Identifying critical failure factors of green supply chain management in China’s SMEs with a hierarchical cause–effect model

Environment, Development and Sustainability - Compared to large companies, the small and medium enterprises (SMEs) in China are more likely to fail in developing green supply chain management...     

Design and use of group-specific primers and probes for real-time quantitative PCR

Real-time quantitative polymerase chain reaction (qPCR) has gained popularity as a technique to detect and quantify a specific group of target microorganisms from various environmental samples including soil, water, sediments, and sludge. Although qPCR is a very useful technique for nucleic acid quantification, accurately quantifying the target microbial group strongly depends on the quality of the primer and probe used. Many aspects of conducting qPCR assays have become increasingly routine and automated; however, one of the most important aspects, designing and selecting primer and probe sets, is often a somewhat arcane process. In many cases, failed or non-specific amplification can be attributed to improperly designed primer-probe sets. This paper is intended to provide guidelines and general principles for designing group-specific primers and probes for qPCR assays. We demonstrate the effectiveness of these guidelines by reviewing the use of qPCR to study anaerobic processes and biologic nutrient removal processes. qPCR assays using group-specific primers and probes designed with this method, have been used to successfully quantify 16S ribosomal Ribonucleic Acid (16S rRNA) gene copy numbers from target methanogenic and ammonia-oxidizing bacteria in various laboratory- and full-scale biologic processes. Researchers with a good command of primer and probe design can use qPCR as a valuable tool to study biodiversity and to develop more efficient control strategies for biologic processes.