An Evaluation of the NIOSH Lifting Equation: A Psychophysical and Biomechanical Investigation

Using the results of psychophysical and biomechanical experiments, NIOSH (National Institute for Occupational Safety and Health) Recommended Weight Limit (RWL), the Lifting Index (LI), the form of the asymmetry multiplier, and the criterion for compression force were investigated. Analysis of the results indicated a significant difference between the NIOSH RWL and the reported Maximum Acceptable Weight of Lift (MAWL). Contrary to the NIOSH lifting equation, the form of the asymmetry multiplier was found to be non-linear. The overall average of peak compression force on the L5/S1 was 3685 N. Fifty-eight percent of all compression forces reported in the biomechanical experiment were found to exceed the suggested 3400 N set by NIOSH guidelines. These results support previous research findings on the validity of NIOSH guidelines.     

A Study of Computer-Based Task Performance Under Thermal Stress

A visual-visual dual computer task was designed to test the effect of the thermal environment on dual task performance. The temperatures selected for testing were 20 and 35 °C Wet Bulb Globe Temperature (WBGT). 34 volunteers were randomly assigned to 1 of the 2 temperature conditions. Individual differences in single task performance were controlled by equating the baselines of single task performance. Once individual differences in single task capacity were controlled, statistically significant differences in performance were demonstrated. Mean accuracy was computed over a 1-hr testing period in each temperature condition. Participants’ mean accuracy in the 35° condition (38.18%) was substantially lower than in the 20° condition (50.88%).     

Long-Term Prediction of Traffic Accident Record From Bus Driver Celeration Behavior

Driver celeration (speed change) behavior of bus drivers measured a number of times was used to predict their culpable accidents over increasing time periods. It was found that predictive power was considerable (>.30 correlation) over 5 years of time with aggregated celeration (mean of repeated measurements) as independent variables, and there were also indications that power reached even further, although too low Ns made these results unreliable. Similarly, there were indications of even stronger correlations with increased aggregation of celeration values. The results were discussed in terms of the methodology needed to bring out such results, and the stability of accident-causing behavior over time.     

Experimental investigation of spark ignition energy in kerosene,hexane, and hydrogen

Quantifying the risk of accidental ignition of flammable mixtures is extremely important in industry and aviation safety. The concept of a minimum ignition energy (MIE), obtained using a capacitive spark discharge ignition source, has traditionally formed the basis for determining the hazard posed by fuels. While extensive tabulations of historical MIE data exist, there has been little work done on ignition of realistic industrial and aviation fuels, such as gasoline or kerosene. In the current work, spark ignition tests are performed in a gaseous kerosene–air mixture with a liquid fuel temperature of 60 °C and a fixed spark gap of 3.3 mm. The required ignition energy was examined, and a range of spark energies over which there is a probability of ignition is identified and compared with previous test results in Jet A (aviation kerosene). The kerosene results are also compared with ignition test results obtained in previous work for traditional hydrogen-based surrogate mixtures used in safety testing as well as two hexane–air mixtures. Additionally, the statistical nature of spark ignition is discussed.     

RAPID-N: Rapid natech risk assessment and mapping framework

Natech accidents at industrial plants are an emerging risk with possibly serious consequences. For the mitigation of natech risk, authorities need to identify natech prone areas in a systematic manner. In order to facilitate probabilistic natech risk mapping, a unified methodology was developed that is based on the estimation of on-site natural hazard parameters, determination of damage probabilities of plant units, and assessment of probability and severity of possibly triggered natech events. The methodology was implemented as an on-line, extensible risk assessment and mapping software framework called RAPID-N, which allows rapid local and regional natech risk assessment and mapping with minimal data input. RAPID-N features an innovative data estimation framework to complete missing input data, such as on-site natural hazard parameters and plant unit characteristics. The framework is also used for damage assessment and natech consequence analysis, and allows easy modification of input parameters, dynamic generation of consequence models according to data availability, and extension of models by adding new equations or substituting existing ones with alternatives. Results are presented as summary reports and interactive risk maps, which can be used for land-use and emergency planning purposes by using scenario hazards, or for rapid natech consequence assessment following actual disasters. As proof of concept, the framework provides a custom implementation of the U.S. EPA's RMP Guidance for Offsite Consequence Analysis methodology to perform natech consequence analysis and includes comprehensive data for earthquakes. It is readily extendible to other natural hazards and more comprehensive risk assessment methods.     

The prediction of safe lifting behavior: an application of the theory of planned behavior

PROBLEM: Injuries resulting from lifting are costly, and create significant pain and discomfort. While engineering controls are the most effective means of reducing risks, most organizations continue to rely on manual lifting techniques. The problem, however, is that the use of safe-lifting techniques is inconsistent and managers have a difficult time motivating use of these techniques. Consequently, it is important to understand the factors driving safe-lifting behaviors. METHODS: This study used a survey to apply the theory of planned behavior (Ajzen., I., 1991. The theory of planned behavior. Organization Behavior and Human Processes, 50, 179-211) to safe-lifting among 136 materials management employees at a heavy manufacturing organization. Structural equation modeling and factor analysis were employed to analyze relationships among constructs. RESULTS: Results revealed that perceived behavioral control and intention were the strongest predictors of safe-lifting behavior. Subjective norms, to a lesser degree, were also important influences on intention. Attitudes did not surface as effective direct predictors of safe-lifting behavior, but did affect behavior and intent via mediating factors (subjective norms and perceived behavioral control). Finally, the theory of planned behavior was supported as an effective model explaining safe-lifting behavior, and had potential application for many other safety-related behaviors. IMPACT ON INDUSTRY: Results from this study emphasize the importance of perceived behavioral control as a factor associated with safety-related behavior.     

On the determination of the laminar burning velocity from closed vessel gas explosions

A methodology to determine the laminar burning velocity from closed vessel gas explosions is explored. Unlike other methods which have been used to measure burning velocities from closed vessel explosions, this approach belongs to the category which does not involve observation of a rapidly moving flame front. Only the pressure–time curve is required as experimental input. To verify the methodology, initially quiescent methane–air mixtures were ignited in a 20-l explosion sphere and the equivalence ratio was varied from 0.67 to 1.36. The behavior of the pressure in the vessel was measured as a function of time and two integral balance models, namely, the thin-flame and the three-zone model, were fitted to determine the laminar burning velocity. Data on the laminar burning velocity as a function of equivalence ratio, pressure and temperature, measured by a variety of other methods have been collected from the literature to enable a comparison. Empirical correlations for the effect of pressure and temperature on the laminar burning velocity have been reviewed and two were selected to be used in conjunction with the thin-flame model. For the three-zone model, a set of coupled correlations has been derived to describe the effect of pressure and temperature on the laminar burning velocity and the laminar flame thickness. Our laminar burning velocities are seen to fall within the band of data from the period 1953–2003. A comparison with recent data from the period 1994–2003 shows that our results are 5–10% higher than the laminar burning velocities which are currently believed to be the correct ones for methane–air mixtures. Based on this observation it is concluded that the methodology described in this work should only be used under circumstances where more accurate methods can not be applied.     

A safety self-management intervention for mining operations

PROBLEM: This quasi-experimental field study examined the efficacy of a safety self-management process to increase safety-related work practices in mining operations. METHODS: After a 7-week baseline, 15 miners participated in a safety self-management training and education presentation. The participants in a prebehavior condition (n=8) recorded their intentions to engage in specific percentages of safety-related work behaviors before starting their shift for the day. In contrast, participants in a postbehavior condition (n=7) recorded their percentages of safety-related work behaviors after their shift for the day. RESULTS: During withdrawal (4 weeks), the miners did not complete any self-monitoring forms. Based on 10,905 behavioral observations, safety self-management was effective at increasing the frequency of safety-related behavior (p<.05). For the prebehavior condition, the mean percent safe score across three target behaviors increased 34.8% during intervention. Similarly, in the postbehavior condition, the mean percent safe score across three target behaviors increased 40.1% during intervention. IMPACT ON INDUSTRY: The results suggest that employees who work in relative isolation or have little oversight, compared to traditional industrial workers, may benefit from a process by which they can systematically observe themselves.     

2003年美国安防企业排行榜

说明:本次排名是综合美国的100家安防界企业而制作的,这些企业中的多数都是从事产品销售、安装及监控服务的,也有少数企业仅仅提供监控服务。由于篇幅有限,仅选取其中前25名的排名公司列表。 总体来说2002年是风平浪静的一年,各大企业的收入状况并没有大起大落的现象,对应的企业排名也没有太大的变化。今年排行榜的特点可以概括为一个字,那就是“稳”。从文中所附的图表可以看出,2002年排名Top 10的公司本年度都在前11名之内。